Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Can't "Save as" in 32bit applications on Windows 7 Pro 64bit.

10 Mar 2011   #1

Windows 7 Pro 64bit SP1
 
 
Can't "Save as" in 32bit applications on Windows 7 Pro 64bit.

Hi folks, have got a really weird problem that I'm hoping someone here might be able to help with, my apologies if this is the wrong board, wasn't sure if I should post here or in Crashes and Debugging...

As the subject line says, I've recently found that I'm unable to use the "save as" function on any 32bit applications as attempting to do so causes the system to hang as it loads the explorer browser to allow me to pick a save location.

I initially discovered the problem about a week ago and originally thought the problem was just limited to Internet Explorer and Firefox, but after poking around my system a bit more, it looks like its affecting everything except 64bit Internet Explorer 8 which can save without any problems.

Have tried looking for help on the Microsoft answers forums, but to be honest a couple of generic template replies later and I can already see that we're hitting the old "I cant figure it out so it must be malware" impasse, and I really cant be bothered flashing my mcse's/mcdst/ccna at the techs there just to convince them I'm not some random timewaster who has no clue and can't follow instructions.

So anyhoo's originally working on the assumption that this was an IE issue, I've so far run through the following troubleshooting steps to no effect...

Random fixes attempted after googling the problem:

  • Resetting IE 8 to default with the Mats tool
  • Run IE Add on remover
  • Removing IPv6 from my network stack
  • Moving the default save location via Explorer
  • Ticking/Unticking the navigation pane options in Organise> Folder and search options.
  • Clean Boot
  • Disabling all network shares (which actually did work until the next reboot - once)
Fixes then tested out as suggested by MS answers users:

  • Uninstalled all Norton Apps and run Norton removal tool just to be sure
  • Reinstalled Norton AV
  • IE Advanced settings reset.
  • Re-registered all IE DLL's for both versions
  • Reset windows update components with the MS Fix It tool
We've then moved on to malware/av scans which are coming up blank, as expected.
For reference, Norton AV, Malware Bytes, Spybot, Windows Defender & MSRT are unable to find anything when run in normal or safemode.
HijackThis is can only find processes that I'd expect to see running.

The system is only used for playing games via Steam, checking my bank and until MS Office 2007 stopped letting me save things, writing reports for work, so I hadn't really expected much to get on there.

Since pretty much giving up on the ms answers community, I've also uninstalled Windows Live Sync which has also not helped.

For those that want a little more history with the pc....

System was built about a year ago, fresh install of everything. Updates are applied pretty much as soon as the pc spots them, driver updates tend to get applied a month or so after release, once I've been able to confirm there's no major issues with them.
Jan this year I added a 1 TB Western Digital USB External Hard disk.
Feb -
PSU upgraded to 650W Dual Rail 80+ model. GFX upgraded from MSI 8600 GT OC 512Mb to Gigabyte GTX 460 OC 1TB. 24 hour soak test came up with no issues and system appeared stable.
Noticed some problems when trying to use Media player and winamp to browse for music on my system as the file menu appeared to hang. Didnt really pay it much attention at the time as I never really play much music on there, the system was just handier than my laptop at the time to use as an impromptu stereo.
Feb 25th/26th ish - SP1 patch installed.
Last week - realised I couldn't use "Save target as" when attempting to download a patch for Mass Effect 2 on my pc as the window would hang as described, in both IE 8 and Firefox....

Other than that I think my system specs are listed on my profile here o.0 all software appears to be up to date. As mentioned I appear to be able to save on IE 8 -64bit with no problems, and can do a quick save in anything, the issue only crops up if the system wants me to specify a save location.
Sorry for the wall of text, but I'd rather make sure all the info is readily available than leave out something important...
Fingers x'ed someone will be able to give me a hand, as whilst I can just reformat and start over, I really hate giving up on a system, especially if the problem isn't resolved and could potentially come back :S

My System SpecsSystem Spec
.

10 Mar 2011   #2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

Run a sfc scan 3-4 times.

SFC /SCANNOW Command - System File Checker

If that doesnt help, try a repair install.

Repair Install
My System SpecsSystem Spec
10 Mar 2011   #3

Windows 7 Pro 64bit SP1
 
 

Quote   Quote: Originally Posted by Bill2 View Post
Run a sfc scan 3-4 times.

SFC /SCANNOW Command - System File Checker

If that doesnt help, try a repair install.

Repair Install
Argh... dont you just hate it when someone points out an obvious trick you would normally laugh at ppl for forgetting *hangs head in shame*

Will run SFC when i get in from work
My System SpecsSystem Spec
.


10 Mar 2011   #4

Windows 7 Pro 64bit SP1
 
 

Just to update you, SFC seems to have corrected it on its first run.

Going to perform a couple of quick reboots now just to make sure anything that was fixed stays that way, and then I'll run SFC a few more times just to iron out any other kinks that may have developed.

Thanks for the short sharp reminder there Bill2 Much needed and appreciated
My System SpecsSystem Spec
10 Mar 2011   #5

Windows 7 Pro 64bit SP1
 
 

d'oh, scratch that. One reboot later and my 32bit apps are again unable to save.



Will run a few more SFC scans as I'd only given it the one before to check, possibly something a little deeper in is corrupting something on shutdown
My System SpecsSystem Spec
10 Mar 2011   #6

XP / Win7 x64 Pro
 
 

Perhaps you could run a HijackThis log and post it up for us to check out? If it's fixed after an SFC scan and is back to not working after a reboot, it could be possible something is loading at startup to screw it up.
My System SpecsSystem Spec
10 Mar 2011   #7

Windows 7 Pro 64bit SP1
 
 

i've run hijack on it previously, log files both under a normal start up and a clean boot are both clean as a whistle.

SFC seems to be picking up two DLL files which are either corrupt or just not working correctly which it seems to be unable to fix, so I'm currently in the process of slip streaming SP1 on to my original install image so that I can run a startup repair, or if necessary a repair install and hopefully replace the files

Unsure how the files got fubared, possibly the SP1 install, or maybe my HDD is starting to develop some bad sectors *shrugs*
My System SpecsSystem Spec
10 Mar 2011   #8

Windows 7 Pro 64bit SP1
 
 

start up repair failed to find any issues.
Repair install failed as windows decided what i thought was a fully updated slipstreamed sp1 image wasnt as up to date as the existing OS .

currently re-imaging to a backup i'd dumped to my porty hard disk about a month ago, hoping that if nothing else, it should at least rip SP1 off the system and leave me out of date enough that the SP1 image will allow me to repair install later...

Issues seem to be with drprov.dll and dfdll.dll - systems reporting corruption or version miss-match and they both seem to be listed as v 6.1.7000.16385 (that might be a little off, working from memory at 4am lol) which seems to match my windows version info right before I applied SP1 in the first place.
My System SpecsSystem Spec
10 Mar 2011   #9

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

I'm away from my comp but you could try checking the version number of the dlls on the supposedly sp1 disk or on another sp1 install, the correct versions can be copied to the hard drive.

Edit: I just checked the version no. of drprov.dll on my sp1 machine and it shows the old string 16385. Theres no dfdll.dll on this machine.
My System SpecsSystem Spec
11 Mar 2011   #10

Microsoft Community Contributor Award Recipient

Windows 7 Ult. x64 Windows 8.1 x64 Ubuntu 12.04 LTS Tri-Boot
 
 

Hi Cytheria,

I'm not sure this is your issue, or possibly related, but does this described some of the symptoms you get:

Description of the 2007 Office system hotfix package (Msoshext-x-none.msp): April 27, 2010

Regards,
Golden
My System SpecsSystem Spec
Reply

 Can't "Save as" in 32bit applications on Windows 7 Pro 64bit.





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:20 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33