Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows dont start to run (Partition Magic 3)


28 May 2011   #1

Windows 7 Ultimate x32
 
 
Windows dont start to run (Partition Magic 3)

Hello,

I think the problem comes from the last installation of partition magic 3 program in the windows 7. Now, when i start windows it goes to repairing starter and detect a problem with \\?\GLOBALROOT\DEVICE\Harddisk0\Partition3\Windows in Windows Directory. And the name of Problem is "StartupRepairOffice"

I hope my english is good enough to explain my problem

Thank you very much,

Carlos Correia

My System SpecsSystem Spec
.

28 May 2011   #2

Windows 7 Ultimate SP1 64-Bit
 
 

Hello Carlos. Welcome to Windows Seven Forums.

Your problem is with Partition Magic 3, which is not compatible with Windows 7 and in particular the NTFS file system.

Chances are it has screwed up your hard disk partitions.

If you have a Windows 7 DVD you'll need to carry out a clean install.

If you have a recovery disk you'll need to use that to recover your system to its factory state.
My System SpecsSystem Spec
28 May 2011   #3

Windows 7 Ultimate x32
 
 

thank you for welcome and the help : )
My System SpecsSystem Spec
.


28 May 2011   #4

Windows 7 Ultimate SP1 64-Bit
 
 

You're very welcome.

Have you made any progress on solving your problem?
My System SpecsSystem Spec
28 May 2011   #5

Windows 7 Pro x64 (1), Win7 Pro X64 / WinXP Pro x86 on (2)
 
 

As was pointed out, Partition Magic version 3 is a VERY VERY old version of the program. It is certainly unusable with Windows 7. In fact, even the final version 8 of the program (which I, myself, owned) is unusable with Windows 7.

And also as was pointed out, your best resolution method is probably just to "start over", perhaps formatting your hard drive to empty and reinstalling Windows 7 from scratch, using the Windows 7 installation DVD itself.

Or, restoring from a manufacturer's "recovery disks" if possible could also work.


For any of your future hard drive and partitioning needs, absolutely the best suggestion for a replacement product for the old Partition Magic series would be the current "Partition Wizard Home Edition v6.0", which is free and looks/feels EXACTLY LIKE the old Partition Magic so you should feel right at home. It works perfectly under Windows 7, both 32-bit and 64-bit.

It also has a standalone bootable CD you can use, for those special situations where you're working on a brand new drive or the system partition of an existing drive. You can download the ISO for the bootable CD and burn it yourself.
My System SpecsSystem Spec
31 May 2011   #6

Windows 7 Ultimate x32
 
 

thanks you again for the support.
well, i download and than burned the Windows 7 in a DVD but pc doesn't want run it...
My System SpecsSystem Spec
31 May 2011   #7

Windows 7 Pro x64 (1), Win7 Pro X64 / WinXP Pro x86 on (2)
 
 

Quote   Quote: Originally Posted by Lerphy View Post
i download and then burned the Windows 7 in a DVD but pc doesn't want run it...
What happens? Does the PC boot to your hard drive instead, ignoring the DVD with bootable Partition Wizard on it?

What happened?

You need to be sure that the "boot sequence" in the BIOS places your CD/DVD drive first, in front of your hard drive. If that's the case I can't see how the bootable DVD you burned couldn't be booted from?

What did you use to burn that ISO? Did you use a program that understands an ISO file format and expands it to the exploded files and folders that should be on the output CD or DVD? This is the right thing to do, and a highly recommended easy-to-use program to do just this is IMGBurn (free). The result will be a bootable CD or DVD.

Or did you just copy the ISO file to a DVD? That is wrong, and the result will NOT be a bootable CD or DVD.
My System SpecsSystem Spec
Reply

 Windows dont start to run (Partition Magic 3)




Thread Tools



Similar help and support threads for2: Windows dont start to run (Partition Magic 3)
Thread Forum
Solved partition magic for win 7 Software
windows dont start only black screen BSOD Help and Support
windows dont start, black screen BSOD Help and Support
Partition magic with win 7 Software
Partition Magic destroyed my partition. General Discussion
Partition Magic 5.0 - in 7 languages Software
Partition Magic Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:22 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33