Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Error message when resuming from hibernation

22 Jul 2009   #1

Dual Boot Vista Ultimate 64Bit SP2/Windows 7 RC
 
 
Error message when resuming from hibernation

When coming out of hibernation in Windows 7, I get the following error message:

"Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."

Windows 7 continues to resume and I have not noticed any problems once it resumes.

I am dual booting Vista 64 bit SP2 and Windows 7 64bit on an HP DV3510NR. I recently flashed the latest bios version for my system dated May 2009.

I have no problem resuming from hibernation when booted into Vista.

Has anyone else gotten this error message. Any thoughts on how to go about solving this?

My System SpecsSystem Spec
.

22 Jul 2009   #2

Windows 7 7600.16384 x64
 
 

Have you rebooted since the flash? Or did you hibernate, flash, resume?

Also did you reset you BIOS settings to default after flashing?
My System SpecsSystem Spec
22 Jul 2009   #3

 

A couple of options here.

1) Update your BIOS
2) In BIOS, change your ACPI setting (S3, wakeup...) pardon for not digging further here. When you see it, you will recognize it).
3) Update your ACPI driver i(f HP provides one).

You could also post this problem on as many forums as possible, if you know what I mean.
My System SpecsSystem Spec
.


22 Jul 2009   #4

Dual Boot Vista Ultimate 64Bit SP2/Windows 7 RC
 
 

Quote   Quote: Originally Posted by 7echno7im View Post
Have you rebooted since the flash? Or did you hibernate, flash, resume?
Yes; Flashed bios, rebooted, set up dual boot w/win 7, restarted, hibernate, error message, reintalled win 7 - restarted,- tried hibernate again, same error message.

Quote   Quote: Originally Posted by 7echno7im View Post
Also did you reset you BIOS settings to default after flashing?
No, not yet - will try now.

Thanks
My System SpecsSystem Spec
22 Jul 2009   #5

Dual Boot Vista Ultimate 64Bit SP2/Windows 7 RC
 
 

Quote   Quote: Originally Posted by Antman View Post
A couple of options here.

1) Update your BIOS
2) In BIOS, change your ACPI setting (S3, wakeup...) pardon for not digging further here. When you see it, you will recognize it).
3) Update your ACPI driver i(f HP provides one).
1 - Done just prior to setting up dual boot w/Windows 7. Bios version dated May 2009 is most up to date. Are you saying that I should I try flashing again?

2 - No user changeable ACPI settings in bios.

3. Hp does not provide one

Quote   Quote: Originally Posted by Antman;189435[SIZE=1
You could also post this problem on as many forums as possible, if you know what I mean.[/SIZE]
Not sure if this is a suggestion or... Several days ago I did post about this on Notebook Review Win 7 Forum. I did get several suggestions, none of which worked. The most likely reply was this is a RC and the problem will most likely be fixed before release. Prior to posting, I googled the exact error message and got nothing. I also searched this forum as well as Notebook Review to no avail.
My System SpecsSystem Spec
22 Jul 2009   #6

 

I find nothing at HP re: BIOS screens, so I cannot verify that there is no ACPI option in BIOS, usually found under Power.

So, let's try to force a driver change. From HP's site:


In order to correct problems with the battery's power management software, follow the steps below.
  1. Click Start and type device in the search field, then select Device Manager .
  2. Expand the Batteries category.
  3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall .
    WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
  4. On the Device Manager taskbar, click Scan for hardware changes .
    Alternately, select Action > Scan for hardware changes .
My System SpecsSystem Spec
22 Jul 2009   #7

Windows 7 7600.16384 x64
 
 

from a command line, run powercfg -a what is the return?
My System SpecsSystem Spec
22 Jul 2009   #8

Dual Boot Vista Ultimate 64Bit SP2/Windows 7 RC
 
 

Quote   Quote: Originally Posted by 7echno7im View Post
from a command line, run powercfg -a what is the return?
Microsoft Windows [Version 6.1.7100]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\xxxxxxx>powercfg -a
The following sleep states are available on this system: Standby ( S3 ) Hibernate Hybrid Sleep
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
Standby (S2)
The system firmware does not support this standby state.
My System SpecsSystem Spec
22 Jul 2009   #9

Dual Boot Vista Ultimate 64Bit SP2/Windows 7 RC
 
 

Quote   Quote: Originally Posted by Antman View Post
I find nothing at HP re: BIOS screens, so I cannot verify that there is no ACPI option in BIOS, usually found under Power.

So, let's try to force a driver change. From HP's site:


In order to correct problems with the battery's power management software, follow the steps below.
  1. Click Start and type device in the search field, then select Device Manager .
  2. Expand the Batteries category.
  3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall .
    WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
  4. On the Device Manager taskbar, click Scan for hardware changes .
    Alternately, select Action > Scan for hardware changes .
Wow, so simple...that seems to have done the trick. Thanks so much for your expertise.

Is it appropriate/okay to link back to your post to close out the thread in that other forum in case anyone else has this problem?
My System SpecsSystem Spec
22 Jul 2009   #10

 

Quote   Quote: Originally Posted by darnatl View Post
Is it appropriate/okay to link back to your post to close out the thread in that other forum in case anyone else has this problem?
Absolutely. I was just dogging you because the other forum thread was still open.

I'm glad it worked. Most "problems" have simple solutions. Don't forget to rep 7im. His post, and your result, proved that the driver reset would work, and it should have been my first suggestion.

The rep button is in the upper right hand corner of a post. The one in the middle.
My System SpecsSystem Spec
Reply

 Error message when resuming from hibernation





Thread Tools



Similar help and support threads for2: Error message when resuming from hibernation
Thread Forum
BSOD After Resuming From Sleep/Hibernation, Error BSOD Help and Support
Sometimes the computer locks up after resuming from Hibernation Performance & Maintenance
Solved Freezing While Resuming from Hibernation General Discussion
Solved BSOD after resuming from Hibernation BSOD Help and Support
Solved Hibernation after Resuming from Hibernation ? Performance & Maintenance
Solved BSOD after resuming from hibernation. BSOD Help and Support
BSOD when resuming from Hibernation 7229 BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:52 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33