Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows 7 boot fail

10 Oct 2011   #1

Windows 7 Ultimate x64
Windows 7 boot fail

Hello, sorry for my english but This forum is probably the last thing that could help me.
I rode other topics about this problem. When I start computer it stops right before "Starting Windows" and there is only a black screen. I cant start windows any way.
So i put a disc with windows and try to repair but it said: "there is no problem with windows starting"
Than I started a console and try to insert c: and then
bootrec /fixmbr and fixboot
but fixboot doesn't work - I dont remember literally but it said something like: there is no filesystem/wrong filesystem

when i try to scanos it say that there is 0 operating systems.

Then I tried to run gparted to flag a disc, but it showed me different partitions configuration then ive got on windows - there is no windows disc!

oo.. i tried also to build BCD but when i had to put command: cd boot it said there is no comand like that

Please help me... I dont want to make a format...
Are there any different ways of fix it?
Sorry sorry from my english

My System SpecsSystem Spec

10 Oct 2011   #2


Does the HD register in BIOS setup? Is it set first to boot in BIOS setup, after CD/DVD drive? Try booting HD maker's diagnostic/repair CD to run extended scan: HD Diagnostic

Check for infection by installing, updating and running full scan with Malwarebytes in Safe Mode with networking. If no Safe Mode then download, burn to CD or write to flash stick, boot and run a full scan with Microsoft Standalone System Sweeper.

Boot back into the DVD REpair console or Repair CD to see if it discovers an installation to repair. If not, click through to Recovery Tools list to open command Prompt, type bootrec /fixboot and bootrec /fixmbr to see if it will now show an installation to repair. Do not change the drive letter as you say you did. If it now finds an installation to repair run Startup Repair repeatedly regardless of its finding at first. Next try System Restore from the Repair tools list, then using Command Line SFC -SCANNOW Run in Command Prompt at Boot

Next boot free Partition Wizard bootable CD to see if the 100mb System Rserved partition (preferred) or Win7 partition are still marked Active. If not, rightlick to Modify>Set to Active, then highlight the HD, from Disk tab select "Rebuild MBR", apply steps, reboot to see if it will start. You can also Explore the partitions to see if your files are intact; if so the OS should be reparable unless you damaged it with previous repair attempts.

You can copy out your files using DVD/Repair CD: Copy & Paste - in Windows Recovery Console or using Paragon Rescue CD.

Then if all else fails run Factory Recovery from boot using its Fkey given on first screen, or Recovery Disks you've made or order from manufacturer, or find a Win7 isntallation DVD to clean reinstall with Product Key on COA sticker following these steps: Reinstalling Windows 7
My System SpecsSystem Spec

 Windows 7 boot fail

Thread Tools

Similar help and support threads
Thread Forum
Windows boot fail: Boot selection failed because a required device is
Hi there, I've recently built a new rig and I've had continuous problems trying to boot. I have two HDDs and one SDD. It seems when the two HDDs are plugged in, i can sometimes boot ok, and most times i get: Or Please select a boot device, or something to the affect. I've updated to the...
Hardware & Devices
Computer or Windows 7 fail to boot.
I had to do a clean install of Windows 7, because while trying to fix dual boot with Windows 8 problem, after I no longer wanted dual boot with Windows 8. My main HDD failed, I had to install another HDD, tested it, checked good, I then installed Windows 7 on it, also I used other software and...
General Discussion
Windows Boot Manager FAIL!
Hello Everyone. I had a dual boot with Win7 and Win8. I wanted to remove Win8 cause I was bored and didn't need it. So I used a method on this forum. I did everything right. But the boot manager failed. When I restarted...
General Discussion
INTEL to AMD Windows Boot Fail
Alright guys, this is gonna be a fun one. I bought a new AMD AM3+ 8 core processor and Asrock mobo from Microcenter tonight, got home and stripped the old outdated Intel gear, for the AMD. I've got all of my AMD setup wires tucked neatly, get it to it's bay, turn it on and fail.. It...
Hardware & Devices
windows 7 dell optiplex 755 boot fail
Hi please help i have got a dell OptiPlex 755 (discontinued model) i boot up that takes a bit longer than normal then it goes to the windows 7 logo twirly thing it pauses half way through a flash of blue screen (too short to get a code) then it restarts i can then go to the option to start up...
General Discussion
Why did my windows 7 boot fail?
Recently I just tried starting my computer on and it wouldn't boot. I left my computer in locked mode then it eventually went to sleep. I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:28.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App