Can these DVD+R DL be saved and/or reused somehow

I was trying to copy multiple folders to DVD for backup and was getting ongoing errors trying to use Roxio and/or LG Burning tools.

Another post recommended I go with Imgburn because apparently my issues were with file name length issues which I guess Roxio/LG do not deal well with.

After a little trial and error I got ImgBurn to create my backup DVDs without issues.

Now before getting to the successful burns with ImgBurn..I used about a dozen or so DVD+R DL disks...and would like to save these for re-use latter if possible ?

Here's the "Discovery" log from Imgburn and attached are two screen shots from Windows explorer info.

Is there a way to re-format the lost DVD+R DL disk used up previously ?
ImgBurn info:

HL-DT-ST DVDRAM GH22NS40 NL02 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,085,440
Free Space: 4,270,981,120 bytes
Free Time: 463:27:65 (MM:SS:FF)
Next Writable Address: 2088384
Supported Write Speeds: 2.4x, 4x, 6x, 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: No
Disc Control Blocks Information:
HL-DT-ST 2NS40
Physical Format Information (Last Recorded - L0):
Disc ID: RICOHJPN-D01-02
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded - L1):
Disc ID: RICOHJPN-D01-02
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 6,876 KB/s (5x) - WS: 3,324 KB/s (2.4x)
Descriptor 2...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 6,876 KB/s (5x) - WS: 5,540 KB/s (4x)
Descriptor 3...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 6,876 KB/s (5x) - WS: 8,310 KB/s (6x)
Descriptor 4...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 6,876 KB/s (5x) - WS: 11,080 KB/s (8x)

Ouch! Expensive coasters.

Hold on...

It is physically impossible to rewrite or somehow format and reuse CD-R and DVD-R/DVD+R discs, otherwise they wouldn't be 'R'.

However, according to ImgBurn your discs appear to have open sessions on them. That means as long as the discs aren't actually filled to capacity, you can still write more data to them. Depending on the filesystem used, you can mark already-written files as 'deleted' so that once the session is closed and the disc finalized, those files won't show up any longer.

Current Profile: DVD+R DL
Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,085,440
Free Space: 4,270,981,120 bytes
Free Time: 463:27:65 (MM:SS:FF)
Next Writable Address: 2088384

This warrants a second look. If each of these discs has only had a little bit of data written to it and the session on all of them is still open, they remain usable for having more files written to them.
However, you cannot write an entire image (containing a new, separate filesystem) to them.

ImgBurn is not multisession software. I don't believe those DLs are reusable in any way.

As I said, more data can be added until the open session is closed, and already-written files can be marked deleted at that time. They'll still be on the disc but won't have a reference in the file/folder tree.

It's not necessary to write multiple sessions, although I do believe ImgBurn can deal with them. In any case, adding to an open session is not an issue.