Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: StartupRepairOffline (unique problem signatures)

12 Nov 2011   #1
kyleh6387

Windows 7 Premium 64 bit
 
 
StartupRepairOffline (unique problem signatures)

I was browsing the web on Google Chrome and my computer became unresponsive. I waited several minutes before holding down the power button to restart. Upon restart I got a black screen that said to select a correct boot device or insert one and press a key. I restarted again and Startup Repair came up, I ran it and got this:

Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200939
Problem Signature 05: AutoFailover
Problem Signature 06: 2
Problem Signature 07: NoRootCause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033


I don't have a Windows 7 boot or reinstallation CD that came with my computer. I do however have one that came with a Dell laptop that I have. I've been reluctant to use it because it says only use with Dell computers and mine is CyberPowerPC.

I've also discovered that my hard drive is detected in BIOs but not detected by Startup Repair. I have ASUS Express Gate installed and I can see all of my files on my hard drive there so I don't believe my hard drive is completely dead.

Due to my lack of knowledge I cannot come to any conclusion as to what has happened. I am willing to provide any amount of information necessary to help get my problem fixed.

I would also like to note that I've had a number of BSODs while playing multiple games on my computer, I have no error code numbers for any of those though.


My System SpecsSystem Spec
.
12 Nov 2011   #2
gregrocker

 

First I'd see if I can boot into Safe Mode with Networking to install and run a full scan with Malwarebytes. If this fails download, burn to CD or write to flash stick Microsoft Standalone System Sweeper, boot to run a full scan. If it finds infection you may need Startup Repair from DVD or Repair CD, which should automate SFC but if not run it from Repair console command line: SFC -SCANNOW Run in Command Prompt at Boot

If the Dell is an Reinstallation DVD of the same bit-version (32 or 64) then you can boot it to see if it has the Repair console on second screen. You need to run Startup Repair from there, which should automate System Restore, but if not run it separately from the Recovery Tools list you'll see there.

Make sure Win7 HD is set as first boot Device with all other HD's and peripherals unplugged. Trigger the DVD using one-time BIOS boot Menu F8 key at boot.

You may have video driver problems which need a better Display driver but you must get Win7 started first which is what Startup Repair is for, preferably run from DVD or Repair CD which doesn't depend upon possibly damaged System files. Then you can post up the BSOD files in our Crashes forum for analysis and further help: Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums
My System SpecsSystem Spec
13 Nov 2011   #3
kyleh6387

Windows 7 Premium 64 bit
 
 

Ok so I set my first boot device to my HD with Win7 installed on it, I don't have an option to boot in safe mode or any of that. It goes to the windows loading screen where the Windows Logo forms and then restarts where i have the option to Launch Startup Repair or Start Windows Normally. I choose Startup Repair and a screen appears titled "System Recovery Options" where I have options "Use recover tools that can help fix problems starting Windows. Select an operating system to repair. If your operating system isn't listed, click Load Drivers then install drivers for your hard disks." and "Restore your computer using a system image that you created earlier."

There is no OS for me to choose for the first option and I do not know what driver I need.

I've tried system restore and that doesn't work or change anything. If I click Next on the above mentioned screen it takes me to the System Recovery Options screen. On this screen it says:

Choose a recovery tool
Operation system: Unknown on (Unknown) Local Disk

Startup Repair
System Restore
System Image Recover
Windows Memory Diagnostic
Command Prompt

When I choose Startup Repair it says it cannot repair this computer automatically and I have the option to send information and view problem details. The problem details are:

Problem Event Name: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

When I look at the Diagnosis and Repair details it says the Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding.

My hard drive is a SATA Western Digital Caviar Blue (WD5000AAKS-00V in BIOS)

I would also like to note that in BIOS my Primary IDE Master Device is Not Detected. However for SATA 1 my WDC WD5000AAKS-00V is listed
My System SpecsSystem Spec
.

13 Nov 2011   #4
gregrocker

 

What do you mean you have no Safe Mode option? What happens when you tap the F8 key repeatedly at boot as shown in the link?

What is your primary IDE device in BIOS supposed to be? Where is your DVD drive listed?

Boot the WD Data Lifeguard diagnostics DOS CD to run an extended scan on the HD: HD Diagnostic
Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp

See if your HD can be seen using Diskpart, then make sure Win7 partition or it's 100mb System Reserved boot partition (preferred if you have it) is marked Active before running Startup Repair 3 Separate Times
Partition - Mark as Active (Method Two)

You can see a picture of your HD's partitioning and mark Active using free Partition Wizard bootable CD which also has a HD Surface Scan and can Check File System (both are needed to ascertain HD stability). Once 100mb or Win7 is marked Active, click on HD to highlight it, then from Disk tab select Rebuild MBR, Apply, reboot. This may preclude the need to run Startup Repair 3 times.


Please fill out your System Specs in bottom left corner of post, at least your make/model computer.
My System SpecsSystem Spec
Reply

 StartupRepairOffline (unique problem signatures)




Thread Tools




Similar help and support threads
Thread Forum
I have a UNIQUE computer problem
My PC display in terms of Windows Xp and Windows 7 has the left side of my screen slanted/bent backwards a bit. Instead of the straight-across flawless display I am supposed to have. I've troubleshooted using different monitors, two CRT's and two LCD's, I've used different hard drives, moved the PC...
General Discussion
Problem Signatures?
Often times our new Tecra M11-S3410 will boot up unable to start Windows correctly and show the repair console. The "cancel" button is available, but by selecting it, a prompt will indicate that the repair cannot be canceled. The last time this happened I was able to note down the error...
BSOD Help and Support
Kind of unique HP OEM problem
Hi guys! First off, I kind of feel like a leech, just barging in here and asking questions, but I'm really stumped about what to do here. The story is this: Back in the pre-7 days, I bought an HP-laptop with a 64bit Vista OS. It qualified for the free upgrade to Windows 7, which I of course...
General Discussion
Unique problem
Hello... Im new here, as u can see! Im trying to fix, or at least detect my problem for quite some time now... I have spend hours and hours googling my problem, but i didnt find single thread on the forums or article about problem like mine... So, after many years of good service i...
Installation & Setup
A unique Fallout 3 problem
Hi guys. Just signed up. This seems like a good forum, and everywhere else I've tried has been unable to assist. I think I have a slightly unique problem with F3 to what most people seem to encounter in the threads I have read through - mostly because I cannot get into the game at all and I am...
Gaming


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App