Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error Message

06 Aug 2009   #1
Ariom

Vista Home Premium 64 Bit
 
 
Error Message

I tried posting this on the Installation thread, but did not receive a lot of help/advice. (septprince and Antman being the exceptions: Thanks!)

I am trying to upgrade to Windows 7 (RC) from Vista Home Premium 64 Bit. I get all the way to "Transferring files, setting and programs. (66%)" and I get the following message:

The instruction at 0x76da3892 referenced memory at 0x00000000. The memory could not be read.

I have tried new media without any success.

Does anyone have any ideas why this is happening?

I appreciate any and all help.


My System SpecsSystem Spec
.

06 Aug 2009   #2
Tews

64-bit Windows 8.1 Pro
 
 

This is probably not what you want to hear, but IMO never upgrade ... it tends to leave a lot of trash laying around when its finished... back up your programs and valuable data and do a clean install instead..
My System SpecsSystem Spec
06 Aug 2009   #3
Ariom

Vista Home Premium 64 Bit
 
 

Thanks Tews.

I think that is what I will have to end up doing. It is odd, though, that no one else has run into this error before.
My System SpecsSystem Spec
.


06 Aug 2009   #4
myzr7

Windows 7 Ulti. x64
 
 

Have you tried uninstalling some of your games or maybe graphics programs?Seems to be where your trouble is a program setting or file?
My System SpecsSystem Spec
06 Aug 2009   #5
Ariom

Vista Home Premium 64 Bit
 
 

Yes. I am pretty bare bones now. I think I am just going to go ahead and perform a clean install.

Thanks!
My System SpecsSystem Spec
06 Aug 2009   #6
myzr7

Windows 7 Ulti. x64
 
 

Another thing that has been mentioned is removing some ram sticks, looks like you have 6gigs in your spec list. Might try that. you can add it back in after install. maybe try 2 gigs.Good luck to you with the clean install.
My System SpecsSystem Spec
Reply

 Error Message




Thread Tools





Similar help and support threads
Thread Forum
Never seen before message error message.
"The procedure entry point RtlTryAcquirePebLock could not be located in the dynamic link library NTDLL.DLL." System worked fine the day before no updates or anything was apply, just turn it off for the day and now this error, any idea what up? So far did a sfc/scannow and waiting for the results...
General Discussion
Windows not genuine message plus Error message 0x8000247
Hi folks, I hope someone can help me with this problem: I'm getting the 'Windows not genuine' message box show regularly. When I follow the link to investigate I get the Windows Activation Technologies box come up saying that the Update Installation Failed with Error Code 0x8000247. A while...
Windows Updates & Activation
Microsoft Visual C++ Runtime Library error, error message 00289x01849
Hi, I'm worried about this Microsoft Visual c++ runtime library error... It happens, whenever i'm trying to do anything with my malwarebytes anti-malware. And even if I open the folder where i put malwarebytes exe, there also it shows this error.. Can anyone help me.. Thnks...
General Discussion
network error message: "Error code: 0x80070035". No file shareing help
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems. However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet...
Network & Sharing
Error:720 Error Message When You Try to Establish a Dial-Up Connection
Team, Before my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720". been searching the internet for a solution but none of them worked. if anyone knows how to fix this please shed...
Network & Sharing
Error message The error, LaunchFFC-1,
I cannot get onto Yahoo Mail. I have windows 7. Any ideas?? I have rebooted and shut down, and had no luck.
Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App