Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Start up repair problem in Win 7 x64

19 Dec 2011   #1
vakili

Windows 7 Ultimate x64
 
 
Start up repair problem in Win 7 x64

Hi
I have a Win 7 ultimate x64 on my Dell Vostro 1510 laptop.
Today I tried to start it but it did not boot.
I inserted my installation disk for start up repair and it said that "It's not for a 64 bit operating system!" but i installed my win 7 from this disk!

What should I do?

pardon me for my bad language.


My System SpecsSystem Spec
.
19 Dec 2011   #2
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

Hello vakili, and welcome to the Sevenforums.

What was the cause, to the best of your knowledge, of the computer not being able to start windows?

Try a repair install: Repair Install

Failing that, would you consider a complete reinstall? In other words, do you have files that you really need?
My System SpecsSystem Spec
19 Dec 2011   #3
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

Welcome to Windows Seven Forums.

What Windows media source are you using?

Is it a retail Windows 7 DVD, a Dell Windows DVD or a recovery disc?
My System SpecsSystem Spec
.

19 Dec 2011   #4
vakili

Windows 7 Ultimate x64
 
 

Thanks for your fast answers.
Windows did not start completely, in comes until this page:

and never goes out. I can not log on into windows
I don't like to a complete reinstall because I have many data on my desktop.
It is a retail Windows 7 DVD that I used for installation and startup repair.

What can I do now?

Thanks
My System SpecsSystem Spec
19 Dec 2011   #5
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

Vakili, did you have a restore point created?
My System SpecsSystem Spec
19 Dec 2011   #6
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

In that case, I would try the repair install that Dusty suggested.

Repair Install

Unlike a clean install, it leaves your applications and personal data intact.
My System SpecsSystem Spec
19 Dec 2011   #7
vakili

Windows 7 Ultimate x64
 
 

about restore point : I don't think so.
I can not log on into windows to use the "Repair install"
I think it's necessary to log on into windows to do a repair install,isn't it?
My System SpecsSystem Spec
19 Dec 2011   #8
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

Be patient, someone may come around with an idea.

meanwhile, what does your installation DVD say on it? and exactly what does your computer say when you attempt a startup repair? And it does look like a repair install requires an admin log in, so we'll have to skip that.
My System SpecsSystem Spec
19 Dec 2011   #9
seavixen32

Windows 7 Ultimate SP1 64-Bit
 
 

Yes, it is necessary to log in first.

However, as the computer is hanging at the Windows Starting screen it's quite likely you may have a hardware problem.

Can you also let us know how and where you acquired your Windows 7 DVD?
My System SpecsSystem Spec
19 Dec 2011   #10
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Have you tried booting into safe mode.
Safe Mode
My System SpecsSystem Spec
Reply

 Start up repair problem in Win 7 x64




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Problem with Start Up Repair, Win 7 Home
A friends grandkids was playing with her Toshiba laptop. Now when she turns it on the screen says, Start-up Repair, and she can't do anymore with it. She does not have a Win 7 dvd. Any ideas on how to get past this screen and log into the laptop? Thank you for your help.
Backup and Restore
Classpnp.sys and start up repair problem
Hi guys and girls I recently had a windows 7 start up problem. I tried to boot in safe mode but it hung on classpnp.sys and then went to start up repair. It has been trying to fix errors for nearly 9 hours so i figure its not actually working. I have tried to cancel the operation but when...
BSOD Help and Support
start up repair problem
When I go to start up repair I just get the black screen+cursor. ALSO, I retried using my Windows 7 Install disc. The same thing happened but this time the window asking me to repair my computer appear (Keyboard type, location, etc.) I pressed next and was also able to get to the page that asked if...
General Discussion
Cannot repair Windows start up problem
Window 7 Home Premium 64-bit Had a dual boot Win 7/Ubuntu 10.10. Got rid of Ubuntu by deleting the partition it was on and extended the Win 7 volume. All of this done in Disk Management. At the end Disk Management showed that space now part of C drive. I restarted to check that the grub...
Installation & Setup
Unable to start- startup repair problem
The system starts with Startup repair. There is no other option and the repair is also not completing successfully. advanced startup options like system restore and memory diagnostic are also not working. it says that system has no restore points. the system is also not booting the windows Cd so...
General Discussion
Cannot start Windows - Startup Repair problem
Hello, The following has just started to happen on my PC running Windows 7 Pro. When I boot up it goes through Startup Repair, but Windows does not start and throws this message: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App