Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: After System Repair, my PC won't even POST.

25 Jan 2012   #1
NariandColds

Windows 7 Ultimate x64
 
 
After System Repair, my PC won't even POST.

So here's my issue. I was minding my own business watching some videos when I hear these weird sound. Like it sounded electrical or whatever. My PC restarts right after. No prob, I get back into Windows and resume what I was doing. And then it resets again as soon as I launch a video. After that I accidentally selected System Repair instead of booting up normally. I don't think the repair even finished working and my pc restarted again. Now I have just a big brick. I start it and it won't even post. No beeps, nothing. I unplugged my harddrives and still won't post. I switched the graphic card with an older one and still no game.
I'm using Win 7 64 bit and I have no idea what I can do. I don't have my win 7 dvd handy right now, but I have a feeling I won't even be able to install a fresh copy since it won't even post.
Anyone else have something similar happen to them? Any advice or past experience would be handy. I just don't know what to do with it. And I can't afford to buy and replace every piece of hardware to see if one of them is faulty.


My System SpecsSystem Spec
.
25 Jan 2012   #2
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

Hello Colds, and welcome to Seven Forums.

This sounds very much like a hardware issue. It could be anything from the motherboard to the power supply to the CPU and more. Now I wouldn't recommend trying to use it in case it fries more of your hardware. I highly recommend taking it in to a good computer repair shop and telling them all that happened.

OR... you could risk everything and let us troubleshoot it with you...


If that is the case, unplug all power and hold the power button down 30 seconds. Then go in with the power still off, and:
  1. reseat everything, check the CPU make sure it doesn't look burnt, and reapply thermal paste to it
  2. make sure the fans and CPU fan is working
  3. sniff for any burnt smell
  4. inspect the graphics card and perhaps test it on another sytem
  5. When you turn it on, count the beeps and light flashes on your motherboard according to your motherboard's manual to see if it tells you there is a problem.
  6. Clean out the dust, and you can even try resetting the BIOS (especially if you've done any overclocking) by pressing the CMOS button if you have one.
  7. Not recommended, but after all this, plug it back in, power on, and try to get into the BIOS. Reset the BIOS inside the BIOS, if you couldn't otherwise (failing this, you could reset it by removing its battery, but it is almost not worth it). Let me know if you can get into BIOS.
  8. Not recommended, but try booting up and do system repair 3 more times. Failing that, read this: Startup Repair Infinite Loop Recovery
  9. Failing all of that, take it in to a computer repair shop like you should have done to begin with...
My System SpecsSystem Spec
25 Jan 2012   #3
NariandColds

Windows 7 Ultimate x64
 
 

That's the thing. There are no physical signs of foul play. The PC is running just fine, all the fans are working and there are no beeps or lights flashing.
I did notice that my hdd light on my case is not flashing at all after the system repair and even after I unplugged them in hope that it would boot into BIOS, it still won't post.
I'm starting to wonder if it's my motherboard. Everything was working fine before today and I never had issues with it rebooting all of a sudden. I was hoping someone else on here had the same issues and had it fixed already. Thanks for the advice though.
Oh, and I should say I'm not a newbie when it comes to PC's. I've built all the computers I had and they worked fine and I am highly skeptical of computer shops because I believe that if they can do it I can do it as well. Not to put your advice down or anything, just wanted to clarify this.
I appreciate you putting up a reply.
My System SpecsSystem Spec
.

25 Jan 2012   #4
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

Not a problem, Colds. I couldn't really know your skill level until you told me. But if you are able to test it out on your own, go for it.

At least if you are able to replace the motherboard and CPU, test them to see if the computer can pass POST without any cards (graphics or network) or USB devices. That way you can narrow down whether or not the MB is actually causing the issues. But anything you do comes with a risk that any electrical problem gets passed down further to other componants.
My System SpecsSystem Spec
25 Jan 2012   #5
NariandColds

Windows 7 Ultimate x64
 
 

I'm aware of that.
I have found my WIN 7 cd, and no game: it won't boot from it. And I had it set to CD->HDD in BIOS. This is not going to be easy.

So far:
  1. No HDD led notification
  2. No Beeps when computer turns on
  3. No smell of burnt components
  4. All fans running as they shoudl
  5. Won't boot of Win 7 CD
  6. Takes over 1 min to turn tower off using power button after being idle for 5+ min
  7. After pushing reset button and trying to use power button to turn it off it turns off as usual: fast, no longer than 15 seconds.

A friend of mine said previously that he's going to bring his tower down for the weekend to test one of my old graphics card. I'll see if I can convince him to let me borrow some of his components for some tests. Hopefully I won't burn/break any of them.
Also, I hate it when stuff like this happens.
My System SpecsSystem Spec
25 Jan 2012   #6
DustSailor

Microsoft Windows 8.1 Pro 64-bit
 
 

If the motherboard doesn't seem to be working and the HDD doesn't display the common light indicating it is receiving power from the PSU, chances are it is your Power supply. A plus side to this is there is no risk to damaging your friend's components if all you do is hook up his PSU to your computer for testing.

Are there normally beeps from your motherboard? Are there any light indications that the board is working?
My System SpecsSystem Spec
25 Jan 2012   #7
NariandColds

Windows 7 Ultimate x64
 
 

I don't see any lights on the motherboard. And the hdd light hasn't worked ever since the sudden reboot. I am fairly confident at this point that it did reboot again during the system repair. It rebooted twice within a short interval right before I launched the sys repair utility.
Two more things I am noticing at this point:
  1. My CPU fan slows down and speeds up at regular intervals while idle like this.
  2. There is some sort of mechanical-type sound coming from the harddrive. As if they're trying to read, but they can't. And it is rhythmic. It does this every 4.5 seconds or so.

I feel a little bit better now. I will try and find a PSU this week to replace my own and see if that is the issue.
My System SpecsSystem Spec
25 Jan 2012   #8
CShark

Win7 64bit
 
 

The cyclic clicking of a HD can mean it is dead or dying. It sounds like the read arm is seeking the boot sector without success. If possible, get another HD, and go from there. Good luck.

Oh, there is a chance you can repair the damaged drives, so don't chuck them out just yet!
My System SpecsSystem Spec
25 Jan 2012   #9
NariandColds

Windows 7 Ultimate x64
 
 

Oh man, that would suck big time. I'll check them out in another friends computer see what's going on. I have two drives so I hope one of them is still going to be good.
Shouldn't the PC at least still post even if the drives are close to dying?
Thanks for the info CShark.
My System SpecsSystem Spec
25 Jan 2012   #10
metalmania31

Windows 7 Pro 64bit build 7601 SP1
 
 

It definitely sounds like PSU or motherboard. You said it sounded like electrical when this initially happened. You think there was a power surge or a brown out when this occurred? If that's the case then one or more of those components could be toast. But you said you didn't smell any burning so the damage could have been more abrupt. Possible it hit the HDD. Do you have another hdd to try. So if you unplug all the drives you don't get post either?
My System SpecsSystem Spec
Reply

 After System Repair, my PC won't even POST.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System Repair USB not working but System Repair disc is.
I have decided recently to create a system repair disc in case something goes wrong with my computer. Using recdisc.exe, I created a system repair disc and everything worked out fine. Once I booted with the repair disc, I got a screen that looks like this: ...
General Discussion
Repair CD - System Repair Disk
Recently questions were raised as to what functions are available on the System Repair CD - Create that Windows 7 will create and burn to a CD. These clips are are from a 32 bit CD I made: Insert the CD in the CD / DVD drive and reboot the computer. When requested, "Hit any key to boot...
Performance & Maintenance
BSOD, Startup Repair, System Repair and other errors on nearlly new PC
I took delivery of a new (and expensive!) PC in January but last week it started giving me constant and varied errors. The isssues range from Blue screen, black screen, failing to load windows, startup repair needed often, system restore needed often, and when it does load windows there are...
BSOD Help and Support
couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR
I need some help, please. I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64 Can you give me some advices, please ? Thank you
General Discussion
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support
System Repair Disk not booting into repair options
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive...so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows. Anyone else experience this with Win 7 Professional? Any tips?
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App