Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 failed to start File: \Boot\BCD Status: 0xc0000225

18 Feb 2012   #11
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Still don't understand what corrupted the BCD after first shutdown. I saw a strange thing in diskmanagement screen. It didn't have an active partition!!! How the heck were you able to boot?!


My System SpecsSystem Spec
.
10 Jul 2012   #12
Obadiah

Wndows 7 home premium 64 bit
 
 
Acer aspire 5532 win7 home edition 64 bit

Hi my laptop has been playing about past few days I get the screen that says. Windows failed to start.a recent hardware or software change ,could be the cause

When I go to launch startup repair it starts then screen goes black I can't do anything else I have followed the advise of taking out battery and unplugging it holding the on button for 30 secs still nothing,I'm pretty screwed by this as I have a industrial tribunal case coming up very soon and all m notes are stored on it yes I know I was stupid by not backing it up to an external drive but I didn't expect it to do this now can anyone plebe help me ASAP thank you Obadiya
My System SpecsSystem Spec
10 Jul 2012   #13
gregrocker

 

Work through these steps for Troubleshooting Windows 7 Failure to Boot - Windows 7 Forums which will not only try everything possible to get Win7 started but also show you how to copy out stranded files, and/or run Factory Recovery or Clean Reinstall if necessary.

More on Acer Recovery if it comes to that:
Acer Support: Frequently Asked Questions list for Recovery media and Restoring a system to factory load
My System SpecsSystem Spec
.

10 Jul 2012   #14
Obadiah

Wndows 7 home premium 64 bit
 
 

It's not even allowing me to go into safe mode some times it lights up but says nothing about starting in safe mode
My System SpecsSystem Spec
10 Jul 2012   #15
gregrocker

 

Then move to the next step in tutorial. You need to disinfect before attempting repairs.

What "lights up?" Are you tapping the F8 key at boot and getting Advanced Boot Options ?

If none of the Safe Modes will boot then try Last Known Good Config.
My System SpecsSystem Spec
26 Sep 2012   #16
robertchatty

Windowds 7 Professional - 64 bit
 
 

I faced the same issue. My friend had moved files and folders from "Program Files (x86)" to my documents. Many issued happened to Windows. I decided to reinstall a new Windows. But I had encountered the same error, when I was trying to go to BIOS for choosing DVD-ROM as the primary boot;
File: \Boot\BCD
Status: 0xc0000225


I found how to go to bios and bypass the error;
1- Press F8 to go to "Safe Mode"
2- Select "Enable Boot Logging". System will restart.
3- Hit "Esc" to go to "Boot Manager". You will see a list of functions with hot-keys to them.
4- Hit "F9" to go to "Boot Order" and select your DVD-ROM as your first boot.
5- Put your Windows 7's disk and now you can install your Windows and finally get rid of this issue.
* You can format "HP TOOLS" and "HP Recovery" partitions. They're no good. Download your drivers again.

Model of Laptop: HP Pavilion g6-1301eo Notebook PC
Bassir Shirzad from Herat, Afghanistan
My System SpecsSystem Spec
26 Sep 2012   #17
gregrocker

 

My System SpecsSystem Spec
Reply

 Windows 7 failed to start File: \Boot\BCD Status: 0xc0000225




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Status: 0xc0000225 boot selection failed; required device inaccessible
Hi everybody, I am dualbooting Windows 7 Ultimate and Arch Linux (using rEFInd boot manager) on a GPT disk and (unfortuunately) have an UEFI system. My setup used to work perfectly fine, until I recently updated rEFInd - and following this - deleted a paramount file on my ESP: bootx64.efi. ...
Installation & Setup
Greetings! Stuck in Windows failed to start" loop with 0xc0000225.
Hello, I've been suffering from this "Windows failed to start" loop with 0xc0000225 for 3 days now and I still can't fix it. The major problem is that I don't have any sort of installation disc. However, I have tried EasyRE via both CD and USB but both result in the same problem. *I try to...
BSOD Help and Support
Windows failed to start: File: boot/bcd
I have a computer I am trying to refurbish. The old hard drive failed. I purchased a new hard drive. The CD/DVD player on the computer does not work, but I am able to boot from a USB. I was able to install Ubuntu from USB with no problems and now have a new copy of windows 7, 32 bit (computer...
General Discussion
status: 0xc0000225 windows boot error
hi there i have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i...
Software
failed to start file: \NST\NTLDR status: 0x000000f
I have installed a clone of my XP in a partition on my new Windows 7 64 bit laptop. I went through this procedure EasyBCD many times. I have the dual boot show up but XP will not boot. It gives the error message failed to start file: \NST\NTLDR status: 0x000000f I did this If you get Error...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App