Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: out of memory and a commit memory use of 30000000

28 Feb 2012   #1
dekennes

windows 7 professional 64 bit
 
 
out of memory and a commit memory use of 30000000

hello,
I have since a few days a problem with my cinema 4D r13.
When I'm working the memory the program use wouldn't come free again.
My commited memory raise to values of 30.000.000 .
I think on a mamory leak but I don't know if this is possible .
Does anyone have the same problem ? Does anyone have a solution for my problem ?

I have 8Gb ram and when the problem occures I was just working on an interior of a house without any texturing.
No havy renders . Just the modeling itself. I have my graduation work in a mounth so I have a big problem if I don't get it running again.

When I'm running my diagsostics there are no faults or errors . I get only the message " Not enough memory" when I use cinema 4D ( after +- 2 hours )

I hope someone can help me .
Thanks in advanced !




Attached Thumbnails
out of memory and a commit memory use of 30000000-2_05.png  
My System SpecsSystem Spec
.
28 Feb 2012   #2
Dwarf

Windows 8.1 Pro RTM x64
 
 

Hi dekennes and welcome to W7 Forums

I've found this (it pertains to version 12): Memory Leak Problem - Plugin Cafe Forums

You might like to post a query there and see what replies you get. If you do, please let us know how you get on.
My System SpecsSystem Spec
28 Feb 2012   #3
fseal

Windows 7 x64 Ultimate
 
 

Also, programs like that tend to want to use as much memory as possible. See if there is a setting to limit its memory use (ala photoshop). Then you can limit it to 6 gigs or so.

Have you tried the Cinema 4D support forums? This may be very specific to the program/revision... They would have the most likely source for solutions and work arounds.
My System SpecsSystem Spec
.

28 Feb 2012   #4
dekennes

windows 7 professional 64 bit
 
 

the values are standard low setted
I didn't changed them
My System SpecsSystem Spec
28 Feb 2012   #5
FliGi7

XP / Win7 x64 Pro
 
 

If the problem is only with this program, I'd certainly contact their support/forum directly as they're much more likely to have the answer to this than us.
My System SpecsSystem Spec
28 Feb 2012   #6
dekennes

windows 7 professional 64 bit
 
 

I already asked them, no know issuses they say
My System SpecsSystem Spec
28 Feb 2012   #7
FliGi7

XP / Win7 x64 Pro
 
 

Then, this would make one known issue. Do they not offer any troubleshooting steps to help figure it out?
My System SpecsSystem Spec
28 Feb 2012   #8
dekennes

windows 7 professional 64 bit
 
 

they gave three options but all not good
My System SpecsSystem Spec
28 Feb 2012   #9
fseal

Windows 7 x64 Ultimate
 
 

Out of curiosity, when you close the program does the memory come back? Or does a lot or most of it stay used?
My System SpecsSystem Spec
28 Feb 2012   #10
dekennes

windows 7 professional 64 bit
 
 

it come totally back
My System SpecsSystem Spec
Reply

 out of memory and a commit memory use of 30000000




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
chkdsk high memory usage / memory leak
Has anyone else noticed that chkdsk uses all available physical memory (if you let it run long enough)? I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical...
Performance & Maintenance
General Win7 memory leak and Unknown memory usage?
So I've had this problem for a few months with my thinkpad x220, win7 home premium 64 bit. I used ccleaner, run memtest86 multiple times, chkdsk multiple times, sfc scan multiple times, none that helped. Sfc always detects errors but always cannot fix some of them. I have mse, avast, and...
Performance & Maintenance
LOW Computer Memory- ONLY 90MB or less Free Memory? Soo Slow?
Hello, i have a Windows 7 64bit OS and i am running a Laptop. Ever since i had this virus (Win32 malware gen) which kept coming up with a notifications of the virus on avast every 2-5 minutes my computer was running slow and when i deleted the virus, by dragging it in to the recycle bin and...
Performance & Maintenance
Quick question regarding commit memory and pagefile
I recently disabled my pagefile to see how it would affect the total commit usage in task manager. I have noticed that the commit usage is higher than the ram usage. Does this mean that Windows is paging to the SSD/HDD anyway? So in effect, if there is 300MB paged elsewhere, I can't use all 8GB of...
Performance & Maintenance
Windows Memory Diagnostic Reports Memory Problems
Hi, I ran Windows Memory Diagnostics multiple times (1GB Ram = 2X512), sometimes it reposrts errors, and sometimes not! I'm running two OS: Windows Server 2008 R2 SP1 64Bit, where I'm encountering bad performance, and Windows 7 32Bit which runs smoothly. I'm not sure if it's really a...
BSOD Help and Support
'Racetrack' Magnetic Memory could make memory 100,000 times faster
Source ScienceDaily (Nov. 15, 2010)
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App