Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RecEnv.exe Application Error

10 Apr 2012   #21
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

you can also put faulty memory in another slot, to prove memory is faulty and not the slot


My System SpecsSystem Spec
.
11 Apr 2012   #22
ConMac

Windows 7 64-bit and Windows XP SP3
 
 
Even with New RAM - Startup Fails

I swapped out the failed RAM for the Corsair 2 x 4GB (DDR3-1866 PC3-15000). I used Memtest86+ v.4.20 for 2+ hours and 2+ passes, and the new RAM passed with no errors. My system still won't boot into Windows 7 64-bit (dual booting with XP on HD #2). I've tried the System Repair Disk and the System OS DVD, and under System Recovery Options for both, it lists the OS as "(recovered)". When I try to do a Startup Repair, it tells me "Startup Repair could not detect a problem."

Should I assume at this point that I have a Registry issue and use the
Startup Repair Infinite Loop Recovery?

How to Recover from an Infinitely Looping Startup Repair Loop without Reinstalling Windows
Published by Dzomlija
01-22-2011

Thanks again.

P.S. XP is booting normally and is stable.
My System SpecsSystem Spec
12 Apr 2012   #23
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I've tried the System Repair Disk and the System OS DVD, and under System Recovery Options for both, it lists the OS as "(recovered)". that's quite normal, because he has fixed it before. You can rename the description so remove the "recovered" text later. But not important now.

winxp runs fine... nice
It's not an infinite loop!! Startup just thinks it's a good installation with everything intact.

Try to boot into win7 safe mode. Tell me exactly what happens
My System SpecsSystem Spec
.

12 Apr 2012   #24
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

perform frorm recovery environment->"command prompt"
diskpart
list vol
exit

now you know drive letters

chkdsk/f c:
chkdsk/f d:
chkdsk/f e:
chkdsk/f g:

so chkdsk for all partitions. any errors? repaired?
My System SpecsSystem Spec
12 Apr 2012   #25
ConMac

Windows 7 64-bit and Windows XP SP3
 
 

Thanks again for the input. I'll do as you suggested and report back.

I forgot to mention; when I did the Memtest86+ test of the new sticks I noticed the following on the screen:

"Slot 0 4096 MB PC3-10600 - Corsair CMZ8GX3M2A1866C9 *XMP*
Slot 1 4096 MB PC3-10600 - Corsair CMZ8GX3M2A1866C9 *XMP*"

Also at the top of this screen it listed under settings:

"RAM: 933 MHz (DDR3-1866/CAS:9-10-9-27/Dual Channel)"

Shouldn't that line above, "PC3-10600", have said "PC3-15000" for my 8 GB (2x 4GB) DDR3 SDRAM 1866 (PC3 15000)? Or does it matter?
My System SpecsSystem Spec
12 Apr 2012   #26
ConMac

Windows 7 64-bit and Windows XP SP3
 
 
Still No Luck...

I could not boot into Safe Mode (or Safe Mode with Networking or with Command Prompt). In Advanced Boot Options for: "(recovered)" - in Windows Error Recovery, I chose Startup Repair. The message said that "Startup Repair Cannot Repair Automatically."

I then went into the Recovery Environment, and under System Recovery Options for "Operating System: (recovered) on (D:) Windows 7" I selected Command Prompt and the following volumes were there:

Vol Label Size Status
0 G: DVD-ROM
1 C: Windows XP NTFS Partition 146GB Healthy
2 E: Windows XP NTFS Partition 785GB Healthy
3 D: Windows 7 NTFS Partition 146GB Healthy
4 F: Windows 7 NTFS Partition 785GB Healthy

I ran chkdsk/f for Volumes 1-4. The results were all the same: "Windows has checked the file system and found no problems." It also listed 0 files in bad sectors for all of them.

When I ran Startup Repair in the Recovery Environment I got the message: "Startup Repair could not detect a problem."

What else is there to test?
My System SpecsSystem Spec
13 Apr 2012   #27
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by ConMac View Post
Thanks again for the input. I'll do as you suggested and report back.

I forgot to mention; when I did the Memtest86+ test of the new sticks I noticed the following on the screen:

"Slot 0 4096 MB PC3-10600 - Corsair CMZ8GX3M2A1866C9 *XMP*
Slot 1 4096 MB PC3-10600 - Corsair CMZ8GX3M2A1866C9 *XMP*"

Also at the top of this screen it listed under settings:

"RAM: 933 MHz (DDR3-1866/CAS:9-10-9-27/Dual Channel)"

Shouldn't that line above, "PC3-10600", have said "PC3-15000" for my 8 GB (2x 4GB) DDR3 SDRAM 1866 (PC3 15000)? Or does it matter?
Not sure. But memtest86 says it's working fine.
My System SpecsSystem Spec
13 Apr 2012   #28
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

  • disks are good
  • memory is good
  • "startup repair" thinks win7 is good.... but that's not true of course
Please explain what's situatio now? I mean you startup. then you select win7 and press enter. what exactly happens then?

Select win7 and press F8. now select safe mode and press enter. What happens exactly?
My System SpecsSystem Spec
13 Apr 2012   #29
ConMac

Windows 7 64-bit and Windows XP SP3
 
 

When I select Windows 7 I get a screen that says that Windows failed to start with two options: Fix Startup (Recommended) or Start Windows Normally. When I select Fix Startup, it tells me that "Startup Repair Cannot Repair Automatically." When I select Start Windows Normally, it comes back to the Windows failed to start screen.

When I press F8 to enter Safe Mode, it doesn't work. The system attempts to boot (it sounds like more than once), and then it comes back to the screen that says Windows failed to start.

Could the MBR be corrupted?
If yes, should I use "bootrec /fixmbr" and "bootrec /fixboot" from the Windows RE Comand Prompt?
My System SpecsSystem Spec
13 Apr 2012   #30
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

"Startup Repair Cannot Repair Automatically."??
You told before "startup repair" thinks Windows 7 is good.... but that's not true of course ".

but now you say "Startup Repair Cannot Repair Automatically."!!
Anyway if it says so... there are some things you can click there something like "view diagnostic details". What's in there? status 0x0 means success
My System SpecsSystem Spec
Reply

 RecEnv.exe Application Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
cmd.exe application error - application was unable to start correctly
cmd.exe application error - application was unable to start correctly (0x0000142). Click ok to close the application Anyone know why it happened? I got this error when I tried to restart to install an update. However, in windows update, it showed I had nothing to update. There was the little...
General Discussion
Application Error Run-Time Error 7 Out of Memory
Hi Forum Users, There is a program that i am trying to install from an xp machine to a windows 7 pc , There is an error which states Run-Time error '7' out of memory when i am trying to open up a database , I have tried to increase the available virtual Ram to 3GB but the same...
Virtualization
Net RunTime Error 1026 followed by game crash application 1000 Error
Hi there, And just when i was thinking the problem is gone here it is whenever i play gta it crashes after 7-40 min different every time i have everything installed all windows updates and all required files so when the game crashes i find the same 2 errors every time in the log : Log Name: ...
Gaming
Avoiding '<application name> is not a valid Win32 application' error.
OK, this is admittedly a strange one... I have used an old (probably a 16-bit) application as my time synchronizer this I've used for quite some time. Its name is TimeRC, and is a great synchronizer as it tracks moon phases along with the time (from selectable, multiple potential time servers)....
General Discussion
application error
hi all...running mcafee...am getting "this application unable to start correctly (Oxc000009a) click ok to close application"....i get this when the computer boots up...not quite sure if my anti virus is working...i have removed the software and re installed mc afee...any suggestions would be great...
Software
application error
The instruction at 0*01590302 referenced memory at 0*458d02cd. The memory could not be read. Click on ok to terminate the program How to solve this problem.?
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App