Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't boot normally after gparted realignment

21 May 2012   #41
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by johntf View Post
Hi Kaktussoft,
Attached is a screenshot of what happens when I type exactly what you said. All the error messages are the reason I thought I was missing something, which I obviously am!
Code was a little bit wrong ... sorry. I updated it in thread. c:\recovery\windowsre has been created succesfully. All you must do now


Code:
 
D:
cd \recovery\windowsre
xcopy /h winre.wim c:\recovery\windowsre
xcopy /h boot.sdi c:\recovery\windowsre
did copy succeed succsful?


My System SpecsSystem Spec
.
21 May 2012   #42
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

did you do
reagentc/disable
REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\
reagentc/enable

?
My System SpecsSystem Spec
21 May 2012   #43
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

post output of bcdedit/enum all !!!!
but first do the reagentc commands if not done yet
My System SpecsSystem Spec
.

21 May 2012   #44
johntf

Windows 7 Premium x64
 
 

Hi there,

My bcdedit output reads :


Quote:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {1f8184a2-14de-11df-9734-f08c6d8c50b0}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 10

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Home Premium
locale en-US
recoverysequence {f3fff01e-a260-11e1-a1e8-848f69c777b3}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963}

Windows Boot Loader
-------------------
identifier {07288cf1-a1e2-11e1-b319-91d364d3f396}
device ramdisk=[\Device\HarddiskVolume2]\Recovery\windowsre\Winre.wim,{07288cf2-a1e2-11e1-b319-91d364d3f396}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\windowsre\Winre.wim,{07288cf2-a1e2-11e1-b319-91d364d3f396}
systemroot \windows
winpe Yes

Windows Boot Loader
-------------------
identifier {07288cf3-a1e2-11e1-b319-91d364d3f396}
device ramdisk=[\Device\HarddiskVolume5]\Recovery\windowsre\Winre.wim,{07288cf4-a1e2-11e1-b319-91d364d3f396}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[\Device\HarddiskVolume5]\Recovery\windowsre\Winre.wim,{07288cf4-a1e2-11e1-b319-91d364d3f396}
systemroot \windows
winpe Yes

Windows Boot Loader
-------------------
identifier {f3fff01e-a260-11e1-a1e8-848f69c777b3}
device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{f3fff01f-a260-11e1-a1e8-848f69c777b3}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{f3fff01f-a260-11e1-a1e8-848f69c777b3}
systemroot \windows
nx OptIn
winpe Yes

Resume from Hibernate
---------------------
identifier {19559bd2-a197-11e1-9581-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Home Premium (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume2
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {07288cf2-a1e2-11e1-b319-91d364d3f396}
ramdisksdidevice partition=\Device\HarddiskVolume2
ramdisksdipath \Recovery\windowsre\boot.sdi

Device options
--------------
identifier {07288cf4-a1e2-11e1-b319-91d364d3f396}
ramdisksdidevice partition=\Device\HarddiskVolume5
ramdisksdipath \Recovery\windowsre\boot.sdi

Device options
--------------
identifier {1f8184a5-14de-11df-9734-f08c6d8c50b0}
description Ramdisk Options
ramdisksdidevice unknown
ramdisksdipath \Recovery\1f8184a4-14de-11df-9734-f08c6d8c50b0\boot.sdi

Device options
--------------
identifier {f3fff01f-a260-11e1-a1e8-848f69c777b3}
description Ramdisk Options
ramdisksdidevice partition=\Device\HarddiskVolume2
ramdisksdipath \Recovery\WindowsRE\boot.sdi
I can disable and re-enable REAGENTC, but I get this message :

Quote:
C:\Windows\system32>REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\winre.wim
REAGENTC.EXE: Operation failed: 3
The system cannot find the path specified.
My System SpecsSystem Spec
21 May 2012   #45
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

you posted the old bcd file from harddisk. Boot from SSD and post bcdedit/enum all output
My System SpecsSystem Spec
21 May 2012   #46
johntf

Windows 7 Premium x64
 
 

I edited my previous post with bcd output!
My System SpecsSystem Spec
21 May 2012   #47
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

bcdedit/store c:\boot\bcd /enum all

post output
My System SpecsSystem Spec
21 May 2012   #48
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\
reagentc/enable
reagentc/info

post output
My System SpecsSystem Spec
21 May 2012   #49
johntf

Windows 7 Premium x64
 
 

See attached. It now won't let me enable reagentc - it says that Access is Denied.


Attached Files
File Type: txt bcd33.txt (3.5 KB, 13 views)
File Type: txt reagen1.txt (504 Bytes, 19 views)
My System SpecsSystem Spec
21 May 2012   #50
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

reagentc output looks fin now!

bcd33.txt is output of bcdedit /enum all ???? So you have booted to ssd??
My System SpecsSystem Spec
Reply

 Can't boot normally after gparted realignment




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
gparted trouble I think
Hi, I used gparted to add partitions E: (extended) and F: logical. Drive c: is origional and holds winxp drive e: is copy of c: drive f: holds win7 The problem is I can see files in an ksh window that windows does not see. using "ls -lst" these files are displayed as: 0 drwxrwxrwx 1...
Installation & Setup
I tried to partition HD with gparted now not boot up
I fear the answer to this question as I am not as diligent in backing up my data as I should be, but I tried to create a new partition out of my c: using gparted and after about 3hrs it still had 6 hours to go so I thought something might be wrong so I cancelled it and now my computer won't boot...
General Discussion
Cannot boot my windows after using GParted
I converted my dynamic disk to basic. Then i used Disk Management to see my partition sequence. What can i see was my BOOT partition is lost and became unallocated which size of 200MB (the BOOT partition is located at the left side of Windows 7 partition). But i still can boot my Windows 7. So i...
Drivers
Gparted will not extend C partition
Hi, i am wanting to extend my C partition (sda3) as i am running out of space, GParted however will not allow me to use the allocated space that you can see from the screenshot. sda5 is able to extend from the allocated space but not the C partition (sda3), i would assume this is because i have...
General Discussion
How to Use GParted?
Can I use GParted to create a 200MB partitioned to the LEFT of my windows partition so that I can use the Windows backup program on a dual boot configeration (without destroying my dual boot MBR configuration)? Windows7 is on a seperate physical hard drive and Vista is on another physical hard...
Performance & Maintenance
7 to usb or partition through gparted/GRUB
Hi - hope you're all enjoying 7. I'm currently downloading it & spent the weekend creating a dual boot XP/Ubuntu. I don't want to mess up my system, so can I install 7 into a flash drive (usb)? Other than that, if I created a new partition through gparted and booted from the 7 iso disk,...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App