Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't boot normally after gparted realignment

21 May 2012   #61
johntf

Windows 7 Premium x64
 
 

This is what I get :




Attached Images
Can't boot normally after gparted realignment-cmdshot3.png 
My System SpecsSystem Spec
.
21 May 2012   #62
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Code:
 
c:
cd \recovery\windowsre
ren    boot.sdi    boot.sdi.test
ren  winre.wim   winre.wim.test
reagentc/enable                         (again access denied? same message?)
anyway rename back

Code:
ren  boot.sdi.test    boot.sdi 
ren  winre.wim.test   winre.wim
My System SpecsSystem Spec
21 May 2012   #63
johntf

Windows 7 Premium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
 
c:
cd \recovery\windowsre
ren    boot.sdi    boot.sdi.test
ren  winre.wim   winre.wim.test
reagentc/enable                         (again access denied? same message?)
anyway rename back
Edit : reagentc is now enabled!
My System SpecsSystem Spec
.

21 May 2012   #64
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by johntf View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
 
c:
cd \recovery\windowsre
ren    boot.sdi    boot.sdi.test
ren  winre.wim   winre.wim.test
reagentc/enable                         (again access denied? same message?)
anyway rename back
Edit : reagentc is now enabled!
very very strange!!
post output of bcdedit/enum all

and of
dir c:\recovery\windowsre
My System SpecsSystem Spec
21 May 2012   #65
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

and reagentc/info
My System SpecsSystem Spec
21 May 2012   #66
johntf

Windows 7 Premium x64
 
 

I've attached BCD and reagentc/info. However, "dir c:\recovery\windowsre" tells me File Not Found and indeed navigating there in Windows Explorer shows that there are no longer any subfolders inside c:\recovery!


Attached Files
File Type: txt bcd5.txt (5.3 KB, 14 views)
File Type: txt reag5.txt (565 Bytes, 13 views)
My System SpecsSystem Spec
21 May 2012   #67
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

in elevated command prompt

attrib c:\recovery\windowsre\*.*
My System SpecsSystem Spec
21 May 2012   #68
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

post output;
bcdedit /store c:\boot\bcd /enum all
My System SpecsSystem Spec
21 May 2012   #69
johntf

Windows 7 Premium x64
 
 

output from "attrib c:\recovery\windowsre\*.*" :
Quote:
SH I C:\recovery\windowsre\winre.wim
and "bcdedit /store c:\boot\bcd /enum all" :
Quote:
Windows Boot Manager
--------------------
identifier {bootmgr}
device boot
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {default}
resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 10

Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Home Premium
locale en-US
recoveryenabled No
osdevice partition=C:
systemroot \Windows
resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963}

Resume from Hibernate
---------------------
identifier {19559bd2-a197-11e1-9581-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device boot
path \Boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
My System SpecsSystem Spec
21 May 2012   #70
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

actually it works fine (almost)

Windows Boot Loader
-------------------
identifier {f3fff020-a260-11e1-a1e8-848f69c777b3}
device ramdisk=[C:]\Recovery\WindowsRE\Winre.wim,{f3fff021-a260-11e1-a1e8-848f69c777b3}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\WindowsRE\Winre.wim,{f3fff021-a260-11e1-a1e8-848f69c777b3}
systemroot \windows
nx OptIn
winpe Yes
Device options
--------------
identifier {f3fff021-a260-11e1-a1e8-848f69c777b3}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\WindowsRE\boot.sdi

-----
but there's still a lot of garbage.... because you boot from:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {1f8184a2-14de-11df-9734-f08c6d8c50b0}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 10
=>so RECOVERY partition on harddisk!!
My System SpecsSystem Spec
Reply

 Can't boot normally after gparted realignment




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
gparted trouble I think
Hi, I used gparted to add partitions E: (extended) and F: logical. Drive c: is origional and holds winxp drive e: is copy of c: drive f: holds win7 The problem is I can see files in an ksh window that windows does not see. using "ls -lst" these files are displayed as: 0 drwxrwxrwx 1...
Installation & Setup
I tried to partition HD with gparted now not boot up
I fear the answer to this question as I am not as diligent in backing up my data as I should be, but I tried to create a new partition out of my c: using gparted and after about 3hrs it still had 6 hours to go so I thought something might be wrong so I cancelled it and now my computer won't boot...
General Discussion
Cannot boot my windows after using GParted
I converted my dynamic disk to basic. Then i used Disk Management to see my partition sequence. What can i see was my BOOT partition is lost and became unallocated which size of 200MB (the BOOT partition is located at the left side of Windows 7 partition). But i still can boot my Windows 7. So i...
Drivers
Gparted will not extend C partition
Hi, i am wanting to extend my C partition (sda3) as i am running out of space, GParted however will not allow me to use the allocated space that you can see from the screenshot. sda5 is able to extend from the allocated space but not the C partition (sda3), i would assume this is because i have...
General Discussion
How to Use GParted?
Can I use GParted to create a 200MB partitioned to the LEFT of my windows partition so that I can use the Windows backup program on a dual boot configeration (without destroying my dual boot MBR configuration)? Windows7 is on a seperate physical hard drive and Vista is on another physical hard...
Performance & Maintenance
7 to usb or partition through gparted/GRUB
Hi - hope you're all enjoying 7. I'm currently downloading it & spent the weekend creating a dual boot XP/Ubuntu. I don't want to mess up my system, so can I install 7 into a flash drive (usb)? Other than that, if I created a new partition through gparted and booted from the 7 iso disk,...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App