Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Recover windows 7 100MB System Reserved partition

22 May 2012   #1

Windows7 64bit
 
 
Recover windows 7 100MB System Reserved partition

Hi

Is it possible and how it works to recover Windows 7 100MB System Reserved partition, deleted by mistake?

My System SpecsSystem Spec
22 May 2012   #2
mjf

Windows 7x64 Home Premium SP1
 
 

Make sure the partition is formatted primary and set active. All other partitions not active.
Make a system repair CD (or download an ISO) from someone's PC. It is in the Backup & Restore screen.
Run the Startup Repair 3 separate times. This should rebuild your system reserved.
My System SpecsSystem Spec
22 May 2012   #3

Windows7 64bit
 
 

Quote   Quote: Originally Posted by mjf View Post
Run the Startup Repair 3 separate times. This should rebuild your system reserved.
Thx a lot, but you mean to start 3 times from the Windows 7 setup CD and repair or just 3 times click on Startup Repair 3?
My System SpecsSystem Spec
.


22 May 2012   #4

Windows 7 Ultimate SP1 64-Bit
 
 

If you need further help, check this tutorial: System Reserved : Create Using Disk Management
My System SpecsSystem Spec
22 May 2012   #5

Windows 7 Ultimate SP1 64-Bit
 
 

Quote   Quote: Originally Posted by upiter77 View Post
Quote   Quote: Originally Posted by mjf View Post
Run the Startup Repair 3 separate times. This should rebuild your system reserved.
Thx a lot, but you mean to start 3 times from the Windows 7 setup CD and repair or just 3 times click on Startup Repair 3?
If you run a startup repair three times, you'll need to reboot after each attempt.
My System SpecsSystem Spec
22 May 2012   #6

Windows7 64bit
 
 

Thx again, I've done, but now using F8 boot option -> "Repair your computer", I get the following:


>>>Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."

Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.<<<


Howto get F8 key "Repair your computer" working?
My System SpecsSystem Spec
22 May 2012   #7

Windows 7 Professional x64 Service Pack 1
 
 

Quote   Quote: Originally Posted by upiter77 View Post
Thx again, I've done, but now using F8 boot option -> "Repair your computer", I get the following:


>>>Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."

Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.<<<


Howto get F8 key "Repair your computer" working?
Run startup repair 3 more times.
My System SpecsSystem Spec
22 May 2012   #8

Windows 7 Ultimate SP1 64-Bit
 
 

Just remember to reboot between each attempt at a startup repair.
My System SpecsSystem Spec
22 May 2012   #9

Windows7 64bit
 
 

F8 still doesn't work and perhaps here is a problem:



C:\Windows\system32>bcdedit /enum all

Menedżer rozruchu systemu Windows
---------------------------------
Identyfikator {bootmgr}
device partition=\Device\HarddiskVolume1
path \bootmgr
description Windows Boot Manager
locale pl-PL
inherit {globalsettings}
default {current}
resumeobject {1d858f4a-2cca-11e1-bfcf-c137106dd4cd}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 10

Moduł ładujący rozruchu systemu Windows
---------------------------------------
Identyfikator {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale pl-PL
inherit {bootloadersettings}
recoverysequence {1d858f4c-2cca-11e1-bfcf-c137106dd4cd}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {1d858f4a-2cca-11e1-bfcf-c137106dd4cd}
nx OptIn

Moduł ładujący rozruchu systemu Windows
---------------------------------------
Identyfikator {1d858f4c-2cca-11e1-bfcf-c137106dd4cd}

Moduł ładujący rozruchu systemu Windows
---------------------------------------
Identyfikator {1d858f51-2cca-11e1-bfcf-c137106dd4cd}
device ramdisk=[C:]\Recovery\1d858f4c-2cca-11e1-bfcf-c137106dd4
cd\Winre.wim,{1d858f52-2cca-11e1-bfcf-c137106dd4cd}
path \windows\system32\winload.exe
description Windows Recovery Environment (odzyskano)
locale
osdevice ramdisk=[C:]\Recovery\1d858f4c-2cca-11e1-bfcf-c137106dd4
cd\Winre.wim,{1d858f52-2cca-11e1-bfcf-c137106dd4cd}
systemroot \windows
winpe Yes

Wznawianie ze stanu hibernacji
------------------------------
Identyfikator {1d858f4a-2cca-11e1-bfcf-c137106dd4cd}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale pl-PL
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Moduł testujący pamięć systemu Windows
--------------------------------------
Identyfikator {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Diagnostyka pamięci systemu Windows
locale pl-PL
inherit {globalsettings}
badmemoryaccess Yes

Ustawienia usług EMS
--------------------
Identyfikator {emssettings}
bootems Yes

Ustawienia debugera
-------------------
Identyfikator {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

Uszkodzenia pamięci RAM
-----------------------
Identyfikator {badmemory}

Ustawienia globalne
-------------------
Identyfikator {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Ustawienia modułu ładującego rozruchu
-------------------------------------
Identyfikator {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Ustawienia funkcji hypervisor
-----------------------------
Identyfikator {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Ustawienia modułu ładującego wznawiania
---------------------------------------
Identyfikator {resumeloadersettings}
inherit {globalsettings}

Opcje urządzenia
----------------
Identyfikator {1d858f4d-2cca-11e1-bfcf-c137106dd4cd}
description Ramdisk Options
ramdisksdidevice unknown
ramdisksdipath \Recovery\1d858f4c-2cca-11e1-bfcf-c137106dd4cd\boot.sdi

Opcje urządzenia
----------------
Identyfikator {1d858f52-2cca-11e1-bfcf-c137106dd4cd}
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\1d858f4c-2cca-11e1-bfcf-c137106dd4cd\boot.sdi

C:\Windows\system32>
My System SpecsSystem Spec
22 May 2012   #10
mjf

Windows 7x64 Home Premium SP1
 
 

Do you have a 100MB system reserved partition which is primary active and another OS partition with the words Boot, pagefile ?

Anyway assuming you do then
Boot the system repair CD or installation disk and go into a command prompt then type:
>bootrec /fixmbr
>bootrec /fixboot
>bootrec /rebuildbcd
Then reboot.

I find startup repair isn't always foolproof.
My System SpecsSystem Spec
Reply

 Recover windows 7 100MB System Reserved partition





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:21 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33