Enabling GUI Boot - Entering BIOS

Hey Guys ,
I Have Toshiba Sat. L745-s4210 Laptop
i have just faced some problems with starting-up the windows 7ultimate-x64
when i press the power button i find that no GUI Boot Screen And When I Press F2 As i Usually Do i can't Enter BIOS And It takes me to some choices ( Safe Mode-Last Known good Config."Advanced"- Start Windows Normally ) And the windows is down
when i tried to safe mode it's stuck at classPNP.sys and start windows normally is stuck at the windows logo and seriously i need help to get to bios so i can change the boot sequence to put the installation or repair disc

Welcome to Windows Seven Forums.

Are you able to access the Advanced Boot Options by pressing the F8 key at startup? It should list the following options:

Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable low-resolution video (640 x 480)
Last Known Good Configuration (advanced)
Directory Services Restore Mode
Debugging Mode
Disable automatic restart on system failure
Disable Driver Signature Enforcement
Start Windows Normally

I'd be inclined to go for Last Known Good Configuration first.

seavixen32 said:

Welcome to Windows Seven Forums.

Are you able to access the Advanced Boot Options by pressing the F8 key ay startup? It should list the following options:

Safe Mode

Safe Mode with Networking

Safe Mode with Command Prompt

Enable Boot Logging

Enable low-resolution video (640 x 480)

Last Known Good Configuration (advanced)

Directory Services Restore Mode

Debugging Mode

Disable automatic restart on system failure

Disable Driver Signature Enforcement

Start WindowsNormally

I'd be inclined to go for Last Known Good Configuration first.

i tried them all bro nothing works

Check out this tutorial: Troubleshooting Windows 7 Failure to Boot

If all else fails, you may need to contact Toshiba for support.

windude99 said:

NZIEN2 said:

seavixen32 said:

Welcome to Windows Seven Forums.

Are you able to access the Advanced Boot Options by pressing the F8 key ay startup? It should list the following options:

Safe Mode

Safe Mode with Networking

Safe Mode with Command Prompt

Enable Boot Logging

Enable low-resolution video (640 x 480)

Last Known Good Configuration (advanced)

Directory Services Restore Mode

Debugging Mode

Disable automatic restart on system failure

Disable Driver Signature Enforcement

Start WindowsNormally

I'd be inclined to go for Last Known Good Configuration first.

i tried them all bro nothing works

As soon as you hit the power button, start pressing the key used to enter setup rapidly.

When I did that, It just took me to a screen where I will either start windows or enter the F8 screen

NZIEN2 said:

Hey Guys ,
I Have Toshiba Sat. L745-s4210 Laptop
i have just faced some problems with starting-up the windows 7ultimate-x64
when i press the power button i find that no GUI Boot Screen And When I Press F2 As i Usually Do i can't Enter BIOS And It takes me to some choices ( Safe Mode-Last Known good Config."Advanced"- Start Windows Normally ) And the windows is down
when i tried to safe mode it's stuck at classPNP.sys and start windows normally is stuck at the windows logo and seriously i need help to get to bios so i can change the boot sequence to put the installation or repair disc

When your computer boots up, does it say that you can press a certain key to access BIOS? On mine it is the delete key, but I've also seen Escape and Backspace.

If F2 is not working to access BIOS, try this from Toshiba support...

Esc key method

Turn the computer on. If you do not see a prompt to press the F2 key, then immediately press and hold the Esc key for three seconds, and then release it. When prompted to, press the F1 key. The Setup screen will appear.