Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: msibxs32.dll error

25 May 2012   #1
SamBlues

Microsoft Windows 7 Home Premium 64-bit SP1
 
 
msibxs32.dll error

hi i am getting an error message each time i start my laptop..it says msibxs32.dll not found..i was wondering if i could get help replacing this file before some serious error occurs...i am using windows 7 home premium x64...thanks


My System SpecsSystem Spec
.
25 May 2012   #2
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Did you check on your Laptop manufacturers website?

You should fill in your system specs, maybe someone with the same laptop could help.
It may be something specific with your Laptop Manufacturer and Model.

I don't have that file on my desktop PC's.
I also don't find anything useful searching for "msibxs32" in Google or Bing.

Did the laptop work ok before, and did this problem just start?
How old is the laptop, or is it new?
My System SpecsSystem Spec
25 May 2012   #3
SamBlues

Microsoft Windows 7 Home Premium 64-bit SP1
 
 

i have a lenovo lapton..itz about a month old..i used revo uninstaller to uninstall a program and after it removed a program it asked if i wanted to remove leftover files and registry entries..since then i have been getting that error each time i log in..could you recommend some sites or links that could be of help to me...
My System SpecsSystem Spec
.

25 May 2012   #4
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

I suggest you specify:
What program you installed and uninstalled.
What you did when "it asked if i wanted to remove leftover files and registry entries".
What your Laptop MODEL is. (fill in your system specs)
If it's a month old, you should have a warranty...consider that option.

Here is the Lenova US website: Laptops, Tablets PCs, Netbooks, Desktops, PCs, Computers and Accessories | Lenovo | US
You can go from there and look for support and answers...
My System SpecsSystem Spec
25 May 2012   #5
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Sam,
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

Add the word laptop or desktop or netbook to the
“system manufacturer” block, for example,
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.
=======================================================

Please provide answers to the questions posed by DavidW7ncus.

Help us to help you.
My System SpecsSystem Spec
25 May 2012   #6
SamBlues

Microsoft Windows 7 Home Premium 64-bit SP1
 
 

Hi guys thanks for all your support..I have filled in as much details as i could...if you could help me out now i would be really grateful..i think i had installed a trial version of bitdefender and then i uninstalled it..when i was asked about the leftover files and registry entries i clicked "delete" after that i have been getting that error message...can system restore help me?
My System SpecsSystem Spec
25 May 2012   #7
Sir George

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by SamBlues View Post
Hi guys thanks for all your support..I have filled in as much details as i could...if you could help me out now i would be really grateful..i think i had installed a trial version of bitdefender and then i uninstalled it..when i was asked about the leftover files and registry entries i clicked "delete" after that i have been getting that error message...can system restore help me?
When you use Revo Uninstaller it runs the program uninstall routine. Afterwards, it identifies files remaining with a message to the affect that some of the files may be used by other programs. At that point, you need to use caution in reviewing the files & registry entries to determine whether they are safe to remove or not. It appears that's where you allowed the program to remove everything in-mass.

One approach you could try; reinstalling BitDefender (if you are certain that's the program you uninstalled) and then uninstall it using either the programs built-in uninstaller (recommended) or Revo, but don't allow the additional removal of files or registry entries when prompted.

HTH
My System SpecsSystem Spec
25 May 2012   #8
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

As far as the Lenovo MODEL, one example is "T520".
I would think it would be displayed on the laptop somewhere.

I haven't been able to find any reference to msibxs32 in Lenovo or Bitdefender sites...
So, I still have no idea what this dll is or where it came from.

You could try Sir George's suggestion.

You could also look in Msconfig Startup and see if you can find any references to "msibxs32".
If you find something, uncheck it so it won't try to startup automatically.

You could also try a System Restore to a point before the problem started.
My System SpecsSystem Spec
25 May 2012   #9
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

sam,
1. Follow Sir George's suggestion
2. Use Speccy and you will be able to fill in your System Specs properly.

SIW will provide you with good info regarding precisely which model you have, a little more complete than that from Speccy.

Links are in my signature.
My System SpecsSystem Spec
25 May 2012   #10
curtiswardwell

 

Just a suggestion, Download Malware Bytes Anto malware and run this in safe mode, Also try downloading Glary Utilites as thid has a registry repair and registry defrag. I have used these progarms without fail and clearing any issues.
Another suggestion would be to remove your HD and use a HD wire kit that you can by at a computer store. Back up any files to another comuter and then do a compllete reinstall of windows. Then re-import your files.
As usual others with more experience may have better suggestions.

Still Learing, Learnig Still

Curtis
My System SpecsSystem Spec
Reply

 msibxs32.dll error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App