Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: EXPLORER.EXE application error after logging in, now black screen

26 Jun 2012   #11
chrissymonds

Windows 7 starter 32bit
 
 

i have installed it all fine etc... this is the info i received... (copied as a txt file)

Summary
Operating System
MS Windows 7 Starter 32-bit SP1
CPU
Cannot initialise SPC dll
RAM
Cannot initialise SPC dll
Motherboard
Cannot initialise SPC dll
Graphics
Cannot initialise SPC dll
Hard Drives
Cannot initialise SPC dll
Optical Drives
No optical disk drives detected
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Starter 32-bit SP1

I am using it on safe mode with networks


My System SpecsSystem Spec
.
26 Jun 2012   #12
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Why are you running in Safe Mode?

Explain "this is the info i received", that is, where, what, how.

If I guess correctly at your answer then:
SFC /SCANNOW Command - System File Checker

when finished upload the sfcdetails.txt file (read the tutorial and that will make sense).
My System SpecsSystem Spec
26 Jun 2012   #13
chrissymonds

Windows 7 starter 32bit
 
 

the txt above is from running the SPECCY program the other guy told me to..

as i've said already, i run the scan now already but it cant fix it... ill upload it just now after i follow the above.

its running in safe mode because of the main issue i am having... it wont run in normal mode.
My System SpecsSystem Spec
.

26 Jun 2012   #14
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Chrissy,
I've reviewed the entire thread.

I agree with Archie:
Backup everything dear to your heart.
Perform a fresh install.

the how with your netbook, I do not know. You would need to go to the ASUS site.

While you are perusing the documentation you fetch about your netbook, then see if the amount of ram can be increased. You will never regret the few centavos you spend to increase your memory to the max the netbook permits.

I have an ASUS netbook, HA 1002 XP, which I wiped clean, installed Win 7 Ultimate, increased the ram to 2 GB (max possible) and also swapped out the HDD for a SSD. Performance is usable but nothing to brag about.

Definitely better than the XP that came on the netbook.
My System SpecsSystem Spec
26 Jun 2012   #15
chrissymonds

Windows 7 starter 32bit
 
 

ok cool, well i dont really have anything on it... cause its just saved on a usb. ill try the fresh install thing... hopefully i can do it right... lol
My System SpecsSystem Spec
05 Nov 2012   #16
Yengus

Windows U7 Ultimate x64
 
 

I was having the Black Screen of Death with mouser pointer and realised through Event Viwer (eventvwr.msc) that the explorer.exe crash was associated to the propsys.dll located in windows\system32 folder.

So, I managed to emulate a mini WinXP via Hiren's Boot, loaded a "health" propsys.dll from my other Windows 7 system and overwrote the corrupted one. Problem solved to me!
My System SpecsSystem Spec
Reply

 EXPLORER.EXE application error after logging in, now black screen




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
explorer.exe - Application Error (0xc000007b) when logging in.
Hello everyone, When i log in on my pc (on laptop at the moment) i get the message: The application was unable to start correctly (0xc000007b). Click OK to close the application. here are the steps i took for some context: - I tried to install a custom theme - took ownership of the...
General Discussion
Another black screen after logging in thread
Hi folks, I'm having some problems with my Windows 7 Ultimate installation. After applying some Windows updates last night I get a black screen with a pointer when I log on to my main account. CTRL + ALT + DEL do not work. I can't get the task manager up. Safe Mode and Safe Mode with...
BSOD Help and Support
Black screen after logging on
Hi guys A week ago I upgraded my CPU from Intel C2D E6300 to E8500. My brother tested over clocking combinations on his account on my PC while I was away. When I returned and tried to log on to my account I got a black screen. I could move my cursor though. CTRL-ALT-DEL and other keyboard...
BSOD Help and Support
Long pause when logging in (black screen)
I am running Windows 7 Professional x64. When I log in to Windows, I get a long black screen for 20 seconds before it will go to my desktop. I have the updated graphics card so I don't know what this could be. Any help would be much appreciated. Thanks, Brandon
BSOD Help and Support
Black Screen after Logging In
So I installed Windows 7 on my laptop about a month ago, and a few weeks later installed it on my desktop as well. However, after two weeks or so of using it on my desktop with no problems whatsoever, it has suddenly decided to stop working. When I start windows, everything appears fine. The...
BSOD Help and Support
Windows 7 black screen after logging in
So when I go to the office I sometimes use remote desktop connection from my office windows xp machine to login to my windows 7 ultimate (builde 7600) home pc. This all works flawlessly, but I guess about a week ago there have been some windows updates (fixes) that I have installed. Now,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App