Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Out of memory problem

13 Jun 2012   #1
finestrat

windows7 Home Premium 64bit
 
 
Out of memory problem

I've got a web design program called ezgenerator4 and one of my projects which is around 400mb keeps getting out of memory problems. When this happens I loose all the work I've done during the time its been open. For example if I've worked on quite a few web pages and then try to close the program which also saves the work I might get an error which says "not enough memory to complete this operation" which means I have to go into task manager and manually close it which loses my work. I've got 8gb of ram which I thought would have been enough. When I check the resource monitor the commit column keeps increasing as I'm using the program and opening more pages, when it exceeds a certain amount it crashes. The other day I checked after I'd done quite a lot of work and the commit value had increased to around 700,000kb which was obviously over the limit because it came up with the dreaded "not enough memory to complete this operation" which meant all my work for the day had gone. I've had a clean re-install of windows7 but the problem is still there. I've asked about this on the ezg forum but they can't seem to find a soloution apart from maybe deleting a lot of pages to make the project smaller which I don't really want to do. Any help would be appreciated.


My System SpecsSystem Spec
.

13 Jun 2012   #2
FliGi7

XP / Win7 x64 Pro
 
 

Sounds like an inherent problem in the program if it's persisting across a clean Windows install. It doesn't sound like this is something wrong with the OS if the program is chewing up memory until it crashes. Even though you aren't having much luck on the software's forum, they are better suited to figure out the solution to this problem that is specific to that program.
My System SpecsSystem Spec
13 Jun 2012   #3
finestrat

windows7 Home Premium 64bit
 
 

Thanks for your reply
My System SpecsSystem Spec
.


13 Jun 2012   #4
FliGi7

XP / Win7 x64 Pro
 
 

I looked on the website and saw that Windows 7 is supported so I'd think they would have better insight into why these problems are occurring. Do you have another system you could try/use this on?
My System SpecsSystem Spec
14 Jun 2012   #5
finestrat

windows7 Home Premium 64bit
 
 

Hi
I'm going to contact them again today, just had the same problem with a much smaller project.
My System SpecsSystem Spec
14 Jun 2012   #6
Brink
Microsoft MVP

64-bit Windows 10 build 10074
 
 

Hello finestrat, and welcome to Seven Forums.

Do you have your page file still set to be managed by the system? If the page file was turned off or set to low, then that could cause low or out of memory errors as well.

Hope this may help,
Shawn
My System SpecsSystem Spec
14 Jun 2012   #7
finestrat

windows7 Home Premium 64bit
 
 

Thanks Shawn I'll have a look at this but I've got a feeling I've already tried it.
My System SpecsSystem Spec
Reply

 Out of memory problem




Thread Tools





Similar help and support threads
Thread Forum
memory problem
i have 64bit windows 7 and it shows that only 3.68gb is usable from 4gb can anyone help
Performance & Maintenance
Memory problem?
I am currently running windows 7 ultimate x64. My PC has been running very slowly. I opened my task manager and at idle my cpu is running at about 25% (which seems ok), I have 4GB on memory installed. Physical memory usage at idle shows almost 4GB exactly. Could this be why my PC is running...
Performance & Maintenance
problem with the memory
hi i use windows 7 ultimate version on 32 bit and 2gig RAM..my problem is when i open facebook chat..it is very slow..and if video chat in msn it even hangs..pls let me know how to rectify the problem..i use sonyhandy cam as web cam.. thanks
General Discussion
Memory problem
I got a 2x2gb XMS2 DDR2 1066mhz memory in MSI 770T-C45 board The memory is only working on 800mhz so I changed FSB/Dram in bios from auto to 1:2.66, and then it shows 1066 in BIOS. Then when I restart it says CMOS checksum bad Press F1 to Run setup Press F2 to load default values.. etc. and...
Hardware & Devices
Memory Problem
Hey guyz, I just turned on my laptop and it's running really crappy and slow. When I went to computer properties, I noticed that out of my 4.0 GB of RAM, only 256 MB is usable... Is this the reason why my laptop is acting like this and why? I've ran my Windows Memory Diagnostic tool but no...
Hardware & Devices
Memory Problem
Once again didn't know where to post. I was ready to render a video in Sony Vegas but it kept telling me that the system memory is too low. I put the Dynamic RAM to 0, and tried again and got the same message. I thought it was just vegas until a message popped up that told me to "close the...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App