Windows 7 won't boot after format and clean install

Hi All

Another one...I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.

Any ideas? Can it be my MBR that is screwed? What options do I have available?

Thank you very much!

Hi Golden. Thank for the answer. It is retail windows 7. Nope, no messages displayed. It boots up normally, no POST issues and just before the windows loading screen, it displays that pretty matrix reloaded screen.

Yes, well it is not mine, it's my friend's disc, but it is a geniune windows cd. Why do you ask? Doe this happen with cracked versions of windows or what?

Ok thanks, will try that and let you know.

Try repairing the Boot Config Data, I had same problem with my desktop, was defo not a disk issue. Sometimes if you've changed the BIOS settings or made a hardware change the BCD becomes corrupt, regardless of trying boot partition recovery and fresh install nothing worked.

Put in the install DVD, open up a command prompt from "Control, Shift + F10" Then run:

Bootrec /fixMBR
then
Bootrec /fixboot

or, if that doesn't work, also run
then
Bootrec /rebuildbcd

hope this helps

All of the repair commands along with many other needed tests and fixes are automated in Win7 Startup Repair.

Work though these steps for Troubleshooting Windows 7 Failure to Boot.

You can't overlook the possiblity of infection although it seems possible it is an untrustworthy installer.

How are you activating Win7? If this is factory preinstalled Win7 I would use the latest official installer to Clean Reinstall - Factory OEM Windows 7 although the same steps will also give you a perfect reinstall for retail, too.

gregrocker said:

All of the repair commands along with many other needed tests and fixes are automated in Win7 Startup Repair.

They are indeed kind sir, BUT, they did not work for my system, if the OS, Boot partition or both are corrupt, startup repair does not always function correctly and is either unable to resolve the issue (in which it notifies you) or it does not fix it, event though it states it has. I find startup repair to be most useful when you have created the repair disk itself and ran from that as it has OS specific information.