Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Folder Name after period is gone


23 Jul 2012   #1

Windows 7 Ultimate x64 SP1
 
 
Folder Name after period is gone

My folders with period (.) on its name will lost the folder name after the period. But the folder name itself doesn't change
Sometime after reboot the problem is gone but will back after some time

Example:
Folder Name after period is gone-7-23-2012-8-09-41-p-m-.png
Note the Type and the name. They should be "NokiaCooker_2.9" and "NaviFirm+ 1.7"

Folder Name after period is gone-7-23-2012-8-11-06-p-m-.png
In file inside the folder properties, the location shows the right path, but in folder path not (when in edit mode however, it shows the right path until I press enter to exit edit mode)
Folder Name after period is gone-7-23-2012-8-18-08-p-m-.png
same with above

Thanks.
Sorry for bad English and explanation



My System SpecsSystem Spec
.

23 Jul 2012   #2

MS Windows 7 Ultimate SP1 64-bit
 
 

I'm confused.

Would you give me one and only one example of folder name which is not appearing correctly?

A smart move is to never use a period in a folder name.

Use the period for its original purpose, that is, as the separator between folder and extension or put another way as the first character of the "extension".
My System SpecsSystem Spec
23 Jul 2012   #3

Windows 7 Ultimate x64 SP1
 
 

This is another example
Folder Name after period is gone-7-23-2012-8-42-48-p-m-.png
The real folder name is ".VirtualBox" created by VBox in my user folder. So sometime it's quite annoying


My System SpecsSystem Spec
.


23 Jul 2012   #4

MS Windows 7 Ultimate SP1 64-bit
 
 

carry out following please:
Care and Feeding of MGADiag tool

Credits: This is based upon information from NoelDP

To properly analyse and solve problems with Activation and Validation,

we need to see a full copy of the report produced by the MGADiag tool.

Download and save to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

After saving, run the downloaded tool.


Click on the Continue button, which will produce the report.


To copy the report to your response:
Click on the Copy button in the tool (ignore any error messages),

Enclose your response in a CODE block.
Paste (using either right-click/Paste, or Ctrl+V ) into your response.

State the Version and Edition of Windows quoted on your COA sticker

which is located on the case of your machine or
inside the battery compartment.

Do NOT quote the Key on the sticker!

COA -- Where and what is it.
My System SpecsSystem Spec
23 Jul 2012   #5

Windows 7 Ultimate x64 SP1
 
 

Here
Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-Q6MMK-KYK6X-VKM6G
Windows Product Key Hash: 289NoAWl2ZoVfuieux/315WkDIc=
Windows Product ID: 00426-OEM-8992662-00173
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {5C62E15D-E822-4FCF-B3C9-1F10F857A7C0}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Internet Explorer\IEXPLORE.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{5C62E15D-E822-4FCF-B3C9-1F10F857A7C0}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-VKM6G</PKey><PID>00426-OEM-8992662-00173</PID><PIDType>2</PIDType><SID>S-1-5-21-672543980-2039693360-2292849225</SID><SYSTEM><Manufacturer>ASUSTeK Computer Inc.</Manufacturer><Model>K42JK</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>218</Version><SMBIOSVersion major="2" minor="6"/><Date>20110729000000.000000+000</Date></BIOS><HWID>FB0E3F07018400FC</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>SE Asia Standard Time(GMT+07:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>_ASUS_</OEMID><OEMTableID>Notebook</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600173-02-1033-7601.0000-2022012
Installation ID: 020180846990004602256110164302311433530176054194649094
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: VKM6G
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 7/23/2012 8:53:13 P.M.

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:


HWID Data-->
HWID Hash Current: OAAAAAIAAQABAAEAAQADAAAABAABAAEA6GHqN9/wcpoAKaCkzJKN7pqIjClML0CO7uzuPUTmXF0=

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information: 
  ACPI Table Name	OEMID Value	OEMTableID Value
  APIC			_ASUS_		_ASUS_
  FACP			_ASUS_		_ASUS_
  HPET			_ASUS_		_ASUS_
  MCFG			_ASUS_		_ASUS_
  ECDT			_ASUS_		_ASUS_
  SSDT			PmRef		Nvga
  SSDT			PmRef		Nvga
  SLIC			_ASUS_		Notebook
Can't find COA
My System SpecsSystem Spec
23 Jul 2012   #6

MS Windows 7 Ultimate SP1 64-bit
 
 

carry out following please:
# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script:
# ***********************************************************************
# Puts COMPUTERINFO.TXT on your desktop
# COMPUTERINFO.TXT contains info about your bios and your computer system
# ***********************************************************************

function get-ID 
  
param ([string]$title, [int]$arraycnt, [int]$arrayndx
  
$id " " $title " "
  
If ($arraycnt -ne 1) {$id $id + [string]$arrayndx " "}
  
$id }
function 
get-title param ([string]$id
  
$hashes = ([int](51 $id.length)/2)
  
$hashstr '#' $hashes
  $title 
$hashstr $id $hashstr
  
If ($title.length -le 51) {$title += "#"}
  
$title  }
$sterne "*" 79
$ossys 
= @(gwmi win32_operatingsystem)
$ossyscnt $ossys.count
$ossysid 
get-id "WIN" 1 0
$dskvol 
= @(gwmi win32_volume)
$dskvolcnt $dskvol.count
$dskarr 
=@(gwmi win32_diskdrive)
$dskarrcnt $dskarr.count
$cpu 
= @(gwmi win32_processor)
$cpucnt $cpu.count
$mobo 
gwmi win32_BaseBoard
$moboid 
get-id "MOTHERBOARD" 1 0
$bootcfg 
gwmi Win32_BootConfiguration 
$bootid 
get-id "BOOT CONFIGURATION" 1 0
$Build 
gwmi Win32_WMISetting
$osid 
get-id "OS BUILD" 1 0
$CS   
gwmi Win32_ComputerSystem   
$CSprod  
gwmi Win32_ComputerSystemProduct 
$id 
get-id "BIOS" 1 0
$csid 
get-id "COMPUTER SYSTEM" 1 0
$bios 
gwmi win32_bios
$obj 
= new-object -typename PSobject
$obj 
Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($id "Name") -value($bios.name) -passthru |
 
add-member -membertype noteproperty -name ($id "Manufacturer") -value($bios.manufacturer) -passthru|
 
add-member -membertype noteproperty -name ($id "Release Date") -value($bios.converttodatetime($bios.releasedate)) -passthru |
 
add-member -membertype noteproperty -name ($id "Serial Number") -value($bios.SerialNumber) -passthru |
 
Add-member -membertype noteproperty -name (Get-title $csid) -value $sterne -passthru |
 
add-member -membertype noteproperty -name ($csid "Manufacturer") -value($cs.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($csid "Model") -value($cs.model) -passthru |
 
add-member -membertype noteproperty -name ($csid "Primary Owner") -value($cs.primaryownername) -passthru |
 
add-member -membertype noteproperty -name ($csid "Type") -value($cs.systemtype) -passthru |
 
add-member -membertype noteproperty -name ($csid "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB")) -passthru |
 
add-member -membertype noteproperty -name ($csid "User Name") -value($cs.username) -passthru |
 
add-member -membertype noteproperty -name ($csid "Product Name") -value($csprod.name) -passthru |
 
add-member -membertype noteproperty -name ($csid "Version") -value($csprod.version) -passthru |
 
add-member -membertype noteproperty -name ($csid "Identifying Number") -value($csprod.identifyingnumber) -passthru |
 
add-member -membertype noteproperty -name ($csid "Vendor") -value($csprod.vendor) -passthru |
 
add-member -membertype noteproperty -name ($osID +"Build version") -value($build.BuildVersion) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Boot Directory") -value($bootcfg.bootdirectory) -passthru |
 
add-member -membertype noteproperty -name ($bootid "Last Drive") -value($bootcfg.lastdrive) -passthru |
 
add-member -membertype noteproperty -name ($moboID "Manufacturer") -value($mobo.manufacturer) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Product Type" )     -value($mobo.product) -passthru |
 
add-member -membertype noteproperty -name ($moboid "Serial Number")  -value($mobo.serialnumber)
for (
$ndx=1$ndx -le $ossyscnt$ndx++) {
  
$d $ossys[$ndx 1]
  
$ossysid get-id "WIN" $ossyscnt $ndx
 $obj 
add-member -membertype noteproperty -name ($ossysid "Build Number") -value($d.buildnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Version") -value($d.caption) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Country Code") -value($d.countrycode) -passthru |
## add-member -membertype noteproperty -name ($ossysid + "Service Pack") -value($d.csdversion) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Install Date") -value($d.converttodatetime($d.installdate))  -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Computer System Name") -value($d.csname) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Last Bootup") -value($d.converttodatetime($d.lastbootuptime)) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "OS Architecture") -value($d.osarchitecture) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Registered User") -value($d.registereduser) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Product ID") -value($d.serialnumber) -passthru |
 
add-member -membertype noteproperty -name ($ossysid "Service Pack Version") -value($d.servicepackmajorversion)
}

for (
$ndx=1$ndx -le $cpucnt$ndx++) {
  
$d $cpu[$ndx 1]
  
$cpuid get-id "CPU" $cpucnt $ndx
 $obj 
add-member -membertype noteproperty -name ($cpuid "Current Core Speed") -value([string][int]$d.currentclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Current Voltage") -value($d.currentvoltage) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "External Clock") -value($d.extclock) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Max. Clock Speed") -value([string][int]$d.maxclockspeed " MHz") -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Manufacturer") -value($d.manufacturer)  -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Name") -value($d.name) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Description") -value($d.description) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "version") -value($d.version) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Cores per CPU") -value($d.numberofcores) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Number of Logical Processors") -value($d.numberoflogicalprocessors) -passthru |
 
add-member -membertype noteproperty -name ($cpuid "Socket Designation") -value($d.socketdesignation)
}
for(
$ndx=1$ndx -le $dskarrcnt$ndx++) {
  
$d $dskarr[$ndx -1];
  
$dskarrid get-id "DISK" $dskarrcnt $ndx
  $obj 
Add-member -membertype noteproperty -name (get-title $dskarrid) -value $sterne -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Model") -value($d.model) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Size") -value([string][int]($d.size/1073741824) + " GB") -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Status") -value($d.status) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Capabilities") -value($d.capabilitydescriptions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Interface Type") -value($d.interfacetype) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Partitions") -value($d.partitions) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Bytespersector") -value($d.bytespersector) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Sectors per track") -value($d.sectorspertrack) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Firmware revision") -value($d.firmwarerevision) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "Device ID") -value($d.deviceid) -passthru |
   
add-member -membertype noteproperty -name ($dskarrid "PNP Device ID") -value($d.pnpdeviceid)
}
function 
Get-DrvType ($n) {
  switch ([
int]$n) {
   
2  {$result "Removable"}
   
3  {$result "Partition"}
   
5  {$result "CDROM"}
   default {
$result "Unknown"}
   } 
  
$result
}
for (
$ndx=1$ndx -le $dskvolcnt$ndx++) {
  
$d $dskvol[$ndx-1]
  
$dskvolid get-id "DISK VOLUME" $dskvolcnt $ndx
  $obj 
add-member -membertype noteproperty -name (get-title $dskvolid)  -value $sterne -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Caption") -value($d.caption)  -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Drive Letter") -value($d.driveletter) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Label") -value($d.label) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Capacity") -value([string][int]($d.capacity/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Free Space") -value([string][int]($d.freespace/1073741824) + " GB") -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Volume Type") -value(get-drvtype($d.drivetype)) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Boot Volume") -value($d.bootvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "System Volume") -value($d.systemvolume) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Compressed") -value($d.compressed) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Serial Number") -value($d.serialnumber) -passthru |
#  add-member -membertype noteproperty -name ($dskvolid + "Device ID") -value($d.deviceid) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "File System") -value($d.filesystem) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Block Size") -value($d.blocksize) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Indexing Enabled") -value($d.indexingenabled) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Auto Mount") -value($d.automount) -passthru |
  
add-member -membertype noteproperty -name ($dskvolid "Dirty Bit Set") -value($d.dirtybitset)
}
$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt $phymemarray.count
for ($ndx=1$ndx -le $cnt$ndx++) {
  
$d $phymemarray[$ndx -1]
  
$id get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj 
add-member -membertype noteproperty -name Get-title $Id ) -value $sterne
  $obj 
add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  
$obj add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}
$arr = @(gwmi win32_PhysicalMemory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1]
  
$id get-id "PHYSICAL MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Bank Label") -value($d.banklabel)
  
$obj add-member -membertype noteproperty -name ($id "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  
$obj add-member -membertype noteproperty -name ($id "Data Width") -value($d.datawidth)
  
$obj add-member -membertype noteproperty -name ($id "Speed") -value($d.speed)
  
$obj add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Tag") -value($d.tag)
  
$obj add-member -membertype noteproperty -name ($id "Device Locator") -value($d.devicelocator)
  
$obj add-member -membertype noteproperty -name ($id "Manufacturer") -value($d.manufacturer)
  
$obj add-member -membertype noteproperty -name ($id "Part Number") -value($d.partnumber)
  
$obj add-member -membertype noteproperty -name ($id "Serial Number") -value($d.serialnumber)
}
$Arr = @(gwmi win32_cachememory)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "CACHE MEMORY" $cnt $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Name") -value($d.name)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Purpose") -value($d.purpose)
  
$obj add-member -membertype noteproperty -name ($id "Block Size") -value($d.blocksize)
  
$obj add-member -membertype noteproperty -name ($id "Installed Size") -value($d.installedsize)
  
$obj add-member -membertype noteproperty -name ($id "Max Cache Size") -value($d.maxcachesize)
  
$obj add-member -membertype noteproperty -name ($id "Number of Blocks") -value($d.numberofblocks)
  
$obj add-member -membertype noteproperty -name ($id "Status") -value($d.status)
}
$Arr = @(gwmi win32_memoryarray)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY ARRAY" $CNT $I
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$Arr = @(gwmi win32_memorydevice)
$cnt $arr.count
for($i=1$i -le $cnt$i++){
  
$d $arr[$i-1];
  
$id get-id "MEMORY DEVICE" $cnd $i
  $obj 
add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj 
add-member -membertype noteproperty -name ($id "Description") -value($d.description)
  
$obj add-member -membertype noteproperty -name ($id "Device ID") -value($d.deviceid)
  
$obj add-member -membertype noteproperty -name ($id "Starting Address") -value($d.startingaddress)
  
$obj add-member -membertype noteproperty -name ($id "Ending Address") -value($d.endingaddress)
}
$obj  $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT 
============================

Attach as an upload the resulting computerinfo.txt file
My System SpecsSystem Spec
23 Jul 2012   #7

Windows 7 Ultimate x64 SP1
 
 

Here


Attached Files
File Type: txt COMPUTERINFO.TXT (38.6 KB, 7 views)
My System SpecsSystem Spec
23 Jul 2012   #8

MS Windows 7 Ultimate SP1 64-bit
 
 

your bios is very old which means probably your chipset driver and other drivers are old.
go to this website:
ASUSTeK Computer Inc. -Support- Drivers and Download K42JK
My System SpecsSystem Spec
23 Jul 2012   #9

Windows 7 Ultimate x64 SP1
 
 

The site only has the same version provided in the DVD so they're old too.
But I managed to update the BIOS, chipset, VGA, Bluetooth, and audio drivers. Others are stock drivers AFAIK
My System SpecsSystem Spec
23 Jul 2012   #10

MS Windows 7 Ultimate SP1 64-bit
 
 

Your first sentence makes no sense, however, the important point is that you updated the bios.

You should have updated all of the other drivers while there. If you have a more recent driver on you system, then you will get a message stating such so that you can cancel the install.

Do me a favor and while we are getting your system up to speed, disconnect all external drives.

carry out following:
HOW TO POST A SNAPSHOT OF DISK MANAGEMENT DISPLAY
Run disk management:
WIN |
type DISKMGMT.MSC | ENTER
This method gives you a display without the unneeded navigation pane.
WIN=key with Microsoft logo on top.

Maximize the output of Disk Management:
Maximize the output of Disk Management:
ALT-Spacebar key combo | X key (selects Maximize) |
Drag the field separators (such as between Status and Capacity) to show entire field.


Make a snapshot:
WIN |
type SNIPPING | ENTER | New
Drag the cursor around the area you want to snip.
File | Save as | select save location and name | Save


Post the snapshot:
Post a File or Screenshot in Seven Forums

Run that script again for me please and attach the resulting computerinfo.txt file as an upload please.
My System SpecsSystem Spec
Reply

 Folder Name after period is gone




Thread Tools



Similar help and support threads for2: Folder Name after period is gone
Thread Forum
Need Some Help Period Graphic Cards
PC slow's down a lot after a period of time Performance & Maintenance
Ram Waranty Period Hardware & Devices
No sound after certain of period Sound & Audio
no sound. period. Sound & Audio
30-day Evaluation Period Installation & Setup
Win7 evaluation period General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:22 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33