Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows won't start/can't do system repair/won't boot from CD

01 Aug 2012   #1
narmex7

win 7
 
 
windows won't start/can't do system repair/won't boot from CD

help please all...

sony vaio PCG-71314L
on turning on, hangs at "windows is starting" for ever
F10 says "disc read error"
F8 says "no operating system found"
booting/repairing/reinstalling from CD hangs at "windows is loading" for ever

what is wrong?
how could i get it to boot/repaired/reinstalled?
really desperate, losing all data on HDD is fine, just need to make it work again.

thank you all for helping!


My System SpecsSystem Spec
.

03 Aug 2012   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello there!

Try this article MBR - Restore Windows 7 Master Boot Record
My System SpecsSystem Spec
03 Aug 2012   #3
narmex7

win 7
 
 

thank you very much Capt. Jack!
very clear step by step instructions!

problem is, the form in #3 is empty, that is, no operating system shows up there, and the top radio button is grayed out as well. the bottom radio button is automatically selected, if i go with that, it hangs at "windows is loading" forever.

so i couldn't boot up the machine to any where where i could do something to it. i tried to boot from win7 CD, no matter whether repair or install new was selected, it would hang at "windows is loading" forever.

this machine has only win7 on it, and was running slower and slower, and one day it suddenly refused to boot, hanging at "windows is starting" forever. i'm not sure whether it is hardware or software problem. how should i go about investigating and discovering what the problems are?
My System SpecsSystem Spec
.


03 Aug 2012   #4
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello there!

Try these two articles
How to Repair the MBR on Windows 7 | eHow.com
Bootmgr is missing - Fix

Then try to Reinstall Windows.
My System SpecsSystem Spec
05 Aug 2012   #5
narmex7

win 7
 
 

couldn't get that far.

How to Repair the MBR on Windows 7 | eHow.com
says insert installation CD, select repair, to get to the command prompt window.

i couldn't get that far, after selecting repair, it hangs at "windows is loading" forever.

maybe win7 checks for what has already been installed, and can never pass this step, because of "disc read error"?
is there anyway of bypassing this error and get to a window where repairing or reinstallation can be done?
My System SpecsSystem Spec
05 Aug 2012   #6
F5ing

Windows 7 Ultimate x64
 
 

Try going into your machine's BIOS and see what it has to say about you hard disk. It may even a provide some testing you can do on the drive.
My System SpecsSystem Spec
06 Aug 2012   #7
narmex7

win 7
 
 

thank you F5ing for the suggestion!

i looked, there is nothing about the hard disk in the BIOS, too bad.

i also tried to boot into safe mode from win7 DVD, but it hangs at "windows is loading" screen, probably just before some sort of screen where something could be done to the system.

when it was loading drivers for safe mode, it seemed to hang a little bit at...
.
.
.
disk.sys
classpnp.sys

will that provide some sort of clue?
My System SpecsSystem Spec
06 Aug 2012   #8
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

I'm thinking it might the Hard drive itself. Download UBCD and run Hard drive Diagnostic
My System SpecsSystem Spec
06 Aug 2012   #9
gregrocker
Microsoft MVP

 
 

Is the HD listed in BIOS setup?

If so reset BIOS to defaults: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Then work through these steps for Troubleshooting Windows 7 Failure to Boot starting with disinfecting OS.

Report back for more or different steps depending upon results.
My System SpecsSystem Spec
07 Aug 2012   #10
narmex7

win 7
 
 

Quote   Quote: Originally Posted by Capt.Jack Sparrow View Post
I'm thinking it might the Hard drive itself. Download UBCD and run Hard drive Diagnostic
thank you Capt. Jack, UBCD511, nice, really nice!

under HDD Diagnosis, the Fujitsu and IBM/Hitachi tools both couldn't detect the drive. the Samsong tool auto detected the HDD, but wouldn't do anything, because mine is a Toshiba.

with wiping and partitions tools, only my usb flash drive showed up. i was using a bootable usb flash stick with UBCD511.

as such, is it positive that the hard drive is dead? are there more definite ways to confirm either way?
My System SpecsSystem Spec
Reply

 windows won't start/can't do system repair/won't boot from CD




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 will not boot, repair start up launch also doesn't work
Hello, I hope you guys can help me. I have A Dell Laptop with Windows 7. Today my laptop stopped working. When I try to turn it on normally, it will go to request to either launch the start up repair or to try booting it up normally again. When I try to launch the start up repair it will state...
Hardware & Devices
'Windows failed to start' message on boot, but nothing to repair?
I have an intermitant problem where I get 'Windows failed to start' with the options 1.Start windows normally 2.Launch system repair. If I select 1. It will run for well over an hour and give a 'cannot repair message' after which it boots normally anyway. If I select 2. It boots fine with no...
General Discussion
Windows failed to start, unable to run system repair, help!
Ok, I have been combing through threads here hoping to find a solution, but none of the things I've tried have worked, so I'm going out on a limb hoping for some suggestions! I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to...
BSOD Help and Support
Windows 7 unable to start, system repair and f8 functions unreachable
Before I start I'm sorry if this is in the wrong thread, i just joined and I don't want to waste time that could be spent trying to fix my computer. Anyways, I've been recently trying to dual boot windows 7 and windows 8 release preview and i tried several methods from vhd to bootable usb, it...
General Discussion
Windows 7 Crashed and almost Unfixable By Start Up Repair or System re
Well I'm a noob in fixing computers , i Have a PC with i7 Processor running Windows 7 Ultimate and one fine day a blue Screen dropped saying a lot of things like Windows has Crashed, Dumping Physical memory, And It isn't working since then , It says Start up repair Can't fix this ...
BSOD Help and Support
help with operating system boot display time, start up repair loop
Almost a year ago, I tried to do an XP and Windows 7 dual boot on my laptop. A few weeks later, I didn't need the XP, so I deleted the partition XP was on. I continued to use 7 though the xp still remained in Windows boot manager upon startup. A few days ago, in the advanced system settings, I...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App