Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Couldn't boot up PC, replaced HD and now get 0x000000124 error

19 Sep 2012   #1
mbadran

Ontario
 
 
Couldn't boot up PC, replaced HD and now get 0x000000124 error

My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows.

Everything was fine then I got one new BSOD which was 0x000000124 and my PC rebooted. I googled this and it showed general hardware failure but I can not identify the issue.

I ran Hard drive test even though I just replaced it, no problems, ran memtest over night and got 8 passes with no errors. I can't seem to find which hard ware is failing if thats the issue..

Any suggestions?


My System SpecsSystem Spec
.

19 Sep 2012   #2
doubled822

Windows 7 Ultimate x64, BackTrack Linux 5 R2, Windows XP
 
 

Firstly, what are your system specs?

Also, please download this app called WhoCrashed to analyze your crash dump files: WhoCrashed: Free Crash Dump Analyzer for Windows - The Winhelponline Blog

I had this issue with a system at work that happened to be the presentation PC for our meetings. It would randomly crash and restart in the middle of the powerpoint presentation, quite frustrating for everyone of course. I ran this and was able to determine the cause was a driver fault with the display driver. Post your output when you run it and we can dig deeper.
My System SpecsSystem Spec
19 Sep 2012   #3
gregrocker
Microsoft MVP

 

In addition follow these steps to post up your BSOD info to our Crashes forum for expert analysis: Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums

While you wait start working through these Troubleshooting Steps for Windows 7
My System SpecsSystem Spec
.


Reply

 Couldn't boot up PC, replaced HD and now get 0x000000124 error




Thread Tools





Similar help and support threads
Thread Forum
BSOD when using osb error 0x000000124
So this does not happen all the time but it gets rather annoying. I open obs and in a short while my screens turns blue with error 0x000000124 how do i get this to stop! Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz MSI H81M-E33 (MS-7817) BIOS Date: 07/22/14 09:35:23 Ver: V6.6B0 8.00 GB Adata...
BSOD Help and Support
Couldn't find Boot disk error while Installing Windows 7 using USB
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I...
Installation & Setup
BSOD 0x116 (stop error) Replaced GPU, replaced RAM, replaced PSU
My monitor goes black and I am forced to reboot. After rebooting I get a blue screen prompt telling me that i've recovered from a BSOD. I've been monitoring them since October. In October, I RMA'd my graphics card. Oct 27. You can see that after I got a new GPU, my BSOD's halted... so...
BSOD Help and Support
BSOD error 0x000000124
Hello Sirs, I have very strange problem with my son's computer. I tried to analyze all info about BSOD, but the reason for BSOD is not clear for me. Recent restart, because of BSOD was yesterday and I found very strange errors like: Event ID:18, Source: WHEA-Logger General: A corrected hardware...
BSOD Help and Support
BSOD Cold Boot 0x000000124
Hello, Guys, you are my last hope ... Since I have bought a second hand Acer Aspire 5741G I'm having a problem with it. Only On cold boot, when the windows logo comes up my laptop freezes or gives me a BSOD 0x000000124. Problem signature: Problem Event Name: BlueScreen OS...
BSOD Help and Support
BSOD Error 0x000000124
I recently installed some new hardware and when I go to refresh my system I get a BSOD error code 0x000000124 updated drivers as well so i'm not sure the problem Log Name: Microsoft-Windows-Kernel-WHEA/Errors Source: Microsoft-Windows-Kernel-WHEA Date: 11/29/2009 6:03:22 PM...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App