How to create partition for win7 Home basic 64 bit??

The owner of a lenovo laptop should go to Forums.Lenovo.com and read what other users say about the lenovo warranties after resizing partitions.

mikiep said:

The owner of a lenovo laptop should go to Forums.Lenovo.com and read what other users say about the lenovo warranties after resizing partitions.

Lenovo doesnt care what we do with the windows.. They only care for damages on lenovo parts,nothing Else.. SO warranty will not void in any such case.. :)

So Finally Thanks For the Help , I solved the partition problem by using Partition Wizard.
So, Here s the brief story.
Partition wizard wasnt burning on the disk,so no boot time partitioning or conversion from primary to logical.
So,tried to carry out partitioning without boot, just installed partitionwizard , Modified the primary partition C to Logical BUzzzz..(Got message, the system may fail to boot).. Went ON...
so.. What i got was.. A logical C drive without any damage or boot problems...
Yupieee....
Once again ..Thanks to all the members here...
Ya.. if u r gna try this at risk..please create recovery disk first,i repeat, create recovery disk first..
Den Just njoy..
:) :)

Golden said:

Tri diz fist, it bee kool az:

Partition Wizard : Use the Bootable CD

Yup.. Tried This.. But the software wasnt able to read the image.. U can see the previous post where this problem ws mentioned..

Golden said:

You didnt do it properly - also you never posted your screen capture image as requested by Greg.

I did it all the way mentioned on the page u just linked.. But the problem was the image ws unreadable.. U can check the conversation with Brink and me.. I mentioned the same problem.. Finally his answer was to burn the image on the disc ... n der ws No other solution ..

N ya i din post any screenshots coz.. system said it will b unable to boot after creating to logical,der was no choice for me...so i took risk and did it.. n der ws no problem den..

Please post back a screenshot of your maximized Disk Management drive map and listings:

1. Type Disk Management in Start Search box.
2. Open Disk Mgmt. window and maximize it.
3. Type Snipping Tool in Start Search box.
4. Open Snipping Tool, choose Rectangular Snip, click New, draw a box around full drive map and all listings.
5, Save Snip, attach using paper clip in Reply Box.

Tell us what is on each partition. We'll look it over to see if it's correct and make any other suggestions.

gregrocker said:

Please post back a screenshot of your maximized Disk Management drive map and listings:

1. Type Disk Management in Start Search box.
2. Open Disk Mgmt. window and maximize it.
3. Type Snipping Tool in Start Search box.
4. Open Snipping Tool, choose Rectangular Snip, click New, draw a box around full drive map and all listings.
5, Save Snip, attach using paper clip in Reply Box.

Tell us what is on each partition. We'll look it over to see if it's correct and make any other suggestions.

No issues now.. the problem is solved now.. :) I have marked thread as solved..

Suit yourself. You apparently know better than us anyway. We've obviously wasted the time of the thousands of others we've requested screenshots from and found potential problems.