Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I cannot find the correct place to change the USB settings

14 Oct 2012   #11
hdej

win7 pro 64 Versie 6.1.7601 Service Pack 1 Build 7601
 
 

Thanks Edwar, no problem. Before optimising I had super support and help from genius BSoD guys (Arc, Koolkat77 and Dave) and they mastered an annoying hibernation/ standby mode BSoD problem I had for over a year. Next step for me is energy drain. It is about the red lines in the report of 10 min. ago they say in English (between clamps) as my sys is Dutch:

USB onderbreken:USB-apparaat wordt niet onderbroken
(USB is not susspended)

Het USB-apparaat is niet in de stand-bymodus gezet.
(USB device has not been set in stand-by mode)
Energiebeheer voor de processor wordt mogelijk verhinderd als een USB-apparaat niet in de stand-bymodus wordt gezet wanneer het niet wordt gebruikt.
(Powercontrol for the processor might be blokked if a USB device is not put in standby mode when not in use)


Apparaatnaam USB-hoofdhub Hostcontroller-id PCI\VEN_8086&DEV_1C26 Locatie van hostcontroller PCI bus 0, device 29, function 0 Apparaat-id USB\VID_8086&PID_1C26
I uploaded the suspension setting Zruker pointed out and there suspended has been chosen but apparently these settings have no effect. Therefore my question if somebody is aware of other USB settings I missed.

Thanks, henk


My System SpecsSystem Spec
.
14 Oct 2012   #12
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

The best I can tell you went through the proper steps in Windows 7. Just a though; could their/there be a setting in your Bios? I wouldn't change things in Bios unless you are comfortable doing so.
Using Windows 7
1. Power Options
2. Change when computer sleeps
3. Change advanced power settings
4. USB settings
5. USB selective suspend settings
My System SpecsSystem Spec
15 Oct 2012   #13
hdej

win7 pro 64 Versie 6.1.7601 Service Pack 1 Build 7601
 
 

Hi Layback Bear, thank you. The USB setting I have is according to what you write, still the energy test (tutorials) point out in red that devices are not put in standby. I have not thought of the BIOS, I will have a look there today and let you know. Thank you.
My System SpecsSystem Spec
.

16 Oct 2012   #14
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

I have no idea of the workings of the bios of your system but you could Google
Eup or What is Eup Ready and the use of it.
My System SpecsSystem Spec
Reply

 I cannot find the correct place to change the USB settings




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Correct settings for MBAM?
Here are my settings for MBAM. Are these the right settings as I get numerous PUP warnings when scanning? Also shows Astromenda Search tab at top which I think I had checked the wrong box in settings/extension I use Chrome as my browser. TIA. Dennis(THW)
System Security
Wrong VGA driver - can't find the correct
I got a brand new 10" laptop 'Crazy Fire'. Preinstalled lots of chinese software, but all graphic elements showd properly. Even as administrator, I could not remove softwre. Did install Win7 utimate, 64 bits. Only two resolutions available, 800 x 600 and 1024 x 768. Graphic elements shows as...
Graphic Cards
how to stop auto-correct for proper nouns/place names
another area where microsoft products get worse... but in office 2010, how to turn-off the auto-capitalisation of, for example, place names. it's super annoying...I have all the tickboxes in the auto-correct menu switched off, but it still capitalises every proper noun and/or place name, which...
Microsoft Office
what are the correct settings for the ide dvd drive
I am putting together a computer using parts that I have lying around. Both hdd's are sata, one dvd drive is sata and the other is ide. My question is what are the correct settings for the ide dvd drive. Please help, have searched the internet for days, with no luck tying to find answer. Please...
Hardware & Devices
How to find correct RAM replacement
Hello Ladies & Gents, Just a quick bit of info, Had BSOD problems and with help from you great people at sevenforums found it was a stick of bad RAM. So, I am looking to replace this but want to make certain I replace it with the correct module. I tried the Crucial scanner which only added...
Hardware & Devices
USB Keyboard & BIOS Even With Correct Settings
A while back I bought a MS Natural Ergonomic Keyboard 4000. Fine. Works, suits my needs. The only problem was that my keyboard and (Logitech USB mx610 cordless) mouse were not recognized when I used an Acronis rescue disk. I updated the bios on the board (badly needed...F3 to F11) and all was well....
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App