Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows failed to start application missing or corrupt aspire one d255

21 Oct 2012   #1
mplmrl

windows 7 starter
 
 
windows failed to start application missing or corrupt aspire one d255

Hi
I am trying to fix my grandaughters acer asprire one d 255 it will not boot up .
Says file:windows\system32\winload.exe status oxoooooof
info: the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive thank you for any help on this mary


My System SpecsSystem Spec
.
21 Oct 2012   #2
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

"restore to factory settngs only gets to 16 %" So it failed after 16%. Not everything has finished so windows wouldn't start whatsover!

failed i/o device error ... hmm looks like harddrive is faulty. Still waranty?
Since you did bootrec/fixboot you seemto be able to enter "command prompt".
Code:
dir  c:
dir  d:
dir e:
What commands give a listing?

Code:
chkdsk/f/r  c:
chkdsk/f/r d:
chkdsk/f/r e:
any errors? btw it takes hours to complete!
My System SpecsSystem Spec
21 Oct 2012   #3
Sir George

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by mplmrl View Post
Hi
I am trying to fix my grandaughters acer asprire one d 255 it will not boot up .
Says file:windows\system32\winload.exe status oxoooooof
info: the selected entry could not be loaded because the application is corrupt when i try to restore to factory settngs only gets to 16 % and gives a error code sysyem restore failed i/o device error f10 brings me to edit boot option so itry to type bootrec/fixboot. if i could type the right thing on the edit boot option might work but not sure what to type . Since there is no disc drive to insert disc how do i do a system restore with no disc drive thank you for any help on this mary
Use an external USB drive to run the disk.
My System SpecsSystem Spec
.

Reply

 windows failed to start application missing or corrupt aspire one d255




Thread Tools




Similar help and support threads
Thread Forum
windows failed to start mvs91xx.sys missing or corrupt.
This happened after I re-installed drivers for a marvell add in sata 6 card. I booted into another OS and replaced the file in the drivers folder but it did the same. Is there any way I can remedy this situation without doing a repair install? win7x64 gigabyte x58a-ud5 v1. SSD is samsung evo...
General Discussion
Windows activation failed -error code 0x8007007b & kms missing/corrupt
Hi Guys i got an error while activation of windows 7 error codes 0x8007007b and also key management service (kms) binding is missing or corrupted. steps i have done : 1. Run windows tweaking tool 2. SFC scan - no corrupted files 3. checked for virus
Windows Updates & Activation
trying to factory restore acer aspire one d255 but....
on the last part it says installing sysprep - factory mode 52/52 complete, but is stuck on here for a long time. help this is the second time I'm trying to restore it.
Installation & Setup
windows failed to load critcal driver is missing or corrupt...help!
hi, basically I have an Acer Aspire 5738Z notebook it was going a bit slow recentley so I decided to wip it clean and start again, before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot. I thought this was my chance to wipe the whole think clean (using...
General Discussion
Need driver for Acer Aspire One D255 -> I Can not access internet
Hi Guys , I'm using Acer Aspire One D255 Windows XP . But I just install new Windows 7 Home Pre 32bit . I can not access internet . I checked "Device manager" and they showed that I have no driver for Ethernet Controller, Network Controller ,and Video Controller] . I think I deleted Windows.old...
Drivers
Acer Aspire D255, dualboot XP/Win 7 S: Win 7 inaccessible
Dear All, I am trying to make a netbook with both win 7 starter (which is preinstalled) and xp. I need XP because of certain compatibility issues between visual basic and internet explorer under win 7. At some point I may remove win 7 completely and buy another netbook/laptop for that, but at...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App