Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Start ups Failing

11 Nov 2012   #1
JerryLZ

Windows 7 Ultimate x64
 
 
Start ups Failing

Hi guys I'm having this error the "boot selection failed because a required device is inaccessible ...oxc000000e"
Basically what is happening is the past week or 2 I have been getting the BSOD kernel data inpage error at random times during gaming. After some research I downloaded crystal disk info and found my HD is running at a peak of 66 celsius!
Well now at random it decides to not even start up and I now have the boot manager failure.
I have Taken my hd out and put it into my girlfriends Hp Touchsmart 310 and after running my system restore disk everything booted up fine so I've made the assumption my Hd is still alive but why is this happening? Is my Mobo acting up? I couldn't boot her Hd in my pc either. I'm confused at this point and have no experience prior to this type of problem. Also I figured this was the best place to post this, if not please move it thank you all

Note: I do not have my windows disk that's why I made my own off my girlfriends pc.
My pc is custom built.


My System SpecsSystem Spec
12 Nov 2012   #2
JerryLZ

Windows 7 Ultimate x64
 
 

Still need severe help I havnt found a solution yet. Only thing I've been offered is maybe my CMOS battery is dead. Does this look like a motherboard related issue even though my mobo logo shows before blackscreening to windows boot log or whatever?
My System SpecsSystem Spec
14 Nov 2012   #3
JerryLZ

Windows 7 Ultimate x64
 
 

I replaced my CMOS battery which I'm sure was dead but not the root cause. If I can boot up into a recovery disk does that rule out hardware issues? Also I did notice both my recovery drive and main drive are marked as primary is that normal?
My System SpecsSystem Spec
14 Nov 2012   #4
gregrocker
Microsoft MVP

 

My System SpecsSystem Spec
26 Nov 2012   #5
JerryLZ

Windows 7 Ultimate x64
 
 

Didn't work
My System SpecsSystem Spec
26 Nov 2012   #6
gregrocker
Microsoft MVP

 

What didn't work? There are multiple steps, and the results of each are what is used to determine what should be done next.

So you need to be fully interactive reporting back the results of each step.

Normally the reply "Didn't work" means someone doesn't want to do the work.

This is the busiest tech forum on the web because every problem will be solved when you work with us closely. So reply with the results of each step, or questions on how to get them done.
My System SpecsSystem Spec
Reply

 Start ups Failing




Thread Tools





Similar help and support threads
Thread Forum
Windows failing to start/install- no hardrive showing
Basically, a friend came to me asking for help. He has an Aspire one d260 netbook and it randomly stopped working. I took a look at it and whenever I try and turn it on it says No bootable device- insert boot disk and press any key. I've tried installing windows from a USB, and it doesn't show...
Installation & Setup
XP issue- MSE failing to start on PC boot
I've had this issue a few days now and am trying to troubleshoot it. It's a Windows XP SP3 machine. A few days ago MSE stayed red on booting the PC. A restart fixed it. The next day it did this again and a restart did not fix it. I had Superantispyware installed as well and ran a full scan- 7...
System Security
Windows failing to start.
After dowloading a norton removal tool for a virus, Windows is now failing to start. Startup repair does not fix it, I have tried several system restore points none of which work (error 0X8000ffff), and the last known configuration is not working either. I can get into the safe mode menu but when I...
General Discussion
Hard Drive Failing, Start-up Repair corrupted it more?
Acer 5741g, Windows 7 64 home premium, 4GB ram, Hitachi HTS5459b9a300 500GB hard drive, BIOS version 1.23 A few weeks ago, hard drive crashed, which i thought was due to it losing battery power during a windows update. I created a Windows recovery disk from a similar laptop, ultimately had to...
General Discussion
Occasional failing to start up and BSOD
I'm having problems with my new computer, which I built it myself. Basically, my computer fails so start-up sometimes (My motherboard produces a long beeep sound. GPU not running at all, but the rest of the components seems to be running - eg. USB, Ethernet etc). Also, it will sometimes...
BSOD Help and Support
Start up failing after removal of second hard drive
Hello, I recently decided to remove one of my hard drives for use in another PC. Ever since removal I have not been able to boot back into Windows, I just get a black screen with a flashing _ in the left hand top corner. I have tried Startup Repair and also manually rebuilding the MBR. ...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App