Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer Shuts Down But Will Not Continue to Reboot

14 Nov 2012   #1
NixySixx

Windows 7 Ultimate 64bit
 
 
Computer Shuts Down But Will Not Continue to Reboot

I've an interesting problem I've never come into before... when I hit 'reboot', my computer shuts down fine but when it is supposed to reboot, my monitor light stays orange (whereas it's blue when it's in use) and the computer just never... boots I guess. The screen stays black. If I press the reboot button on my tower, then I can boot into windows.

I've checked the event viewer and nothing came up except something about a missing driver (The AODDriver4.2 service failed to start due to the following error: The system cannot find the file specified.).

This has been going on since I performed a system restore a month ago because an update of Malwarebytes (to the latest version) literally killed my internet (ISP came out and for three weeks worked on it - giving me a new, direct line I don't share with anyone in my apartment, giving me a new ethernet cable, trying a new network card etc) and finally I was told to uninstall all AV/anti-malware programs one by one (since I've MS Security Essentials and MWB), and after MWB was uninstalled, bam, my internet was fine.).

Not sure what's going on, and I don't really know what information to provide for this since there isn't an error, my Windows just isn't booting.

MWB said nothing was detected (full scan), same for my AV, so what could this be?


ETA; From the Event Viewer, listed as Warning, at the time I rebooted:

Quote:
The Transaction (UOW={c055ddca-29fe-11e2-b7f3-00261840ca2c}, Description='') was unable to be committed, and instead rolled back; this was due to an error message returned by CLFS while attempting to write a Prepare or Commit record for the Transaction. The CLFS error returned was: 0xc0190052.



My System SpecsSystem Spec
.
21 Nov 2012   #2
NixySixx

Windows 7 Ultimate 64bit
 
 

Bump - nothing?
My System SpecsSystem Spec
21 Nov 2012   #3
johnebadbak

Windows 7 Ultimate 32bit
 
 

My System SpecsSystem Spec
.

21 Nov 2012   #4
gregrocker

 

In addition to running SFC -SCANNOW Command and Startup Repair - Run up to 3 Separate Times for CLFS.sys error, are you using AMD Overdrive for overclocking or tweaking?

Quote:
AODDriver 4.01 is used by AMD OverDrive, tune parameters to help system stability, optimize performance, and control cooling/acoustic characteristics.
AMD OverDrive

I would look in your Device Manager, on View tab Show Hidden Devices, and if it's listed and you don't use it I would Uninstall it there and in Control Panel.

If you've done massive tweaking of Win7 then I'd fall back to your oldest Restore Point to see if you can find a stable configuration. If not then I'd follow the Best Practices for Clean Reinstall - Factory OEM Windows 7 (same for retail) then stick with the tools and methods which assure a perfect install going forward.

If these don't resolve the issue then it's likely a hardware problem. Does your board have hardware which installs this erroring driver?
My System SpecsSystem Spec
Reply

 Computer Shuts Down But Will Not Continue to Reboot




Thread Tools




Similar help and support threads
Thread Forum
Computer display shuts off/computer shuts down. During video tasks.
Whenever I play a movie or a game, after about 20 mins or so the display stops working. On some occasions the computer will just shut off. I have ran a AIDA64 benchmark test on my machine with all hardware devices and the system performs well. (Test ran for 5 hours +) I also checked my cpu...
Hardware & Devices
AA number not programmed on this computer.. Press enter to continue
Hello All, Since today, whenever i boot up my system. This message "AA number not programmed on this computer.. Press enter to continue" shows up while boot up every time. when i press enter windows loads fine. the first time this occurred. the Realtek audio drivers were missing and it got it...
General Discussion
Continue without scanning external HDD, computer lags
Hi Sevenforums community, I plugged in an external HDD, I was in a bit of a hurry so I chose the option 'continue without scanning' http://www.ghacks.net/wp-content/uploads/2010/11/do-you-want-to-scan-and-fix-removable-disk.png My computer now lags severely, I cannot open applications. I...
Hardware & Devices
Win7 setup does not continue after first reboot.
I have a 32bit XP installed in C: and I want to install 64bit Win 7 on D:. I have used the usb download tool to make a bootable usb drive and installed Win7 till the 1st reboot. However after the reboot, it just returns to page 1 of the installation (select language, drive to install into etc). If...
Installation & Setup
I need to lock my computer and allow it to continue to use displays
I need to lock the computer but have the external displays remain active as well as the software that is using the displays. How is that possible? The computer lock built into windows turns off the displays as does the screen saver when the return to login screen option is checked. Screen saver...
Customization
MSE shuts down on reboot
I am trying to use MSE on my Win7 computer, but when the computer reboots I get a flag saying MSE is not on and do I want to turn it on. I click yes everytime but when I reboot it is off again. What am I doing wrong here?
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App