I/O error at boot up and probable faulty USB Root Hub on Main. Board


  1. Posts : 7
    Windows 7 Pro x64 Version 6.1.7601 Service Pack 1
       #1

    I/O error at boot up and probable faulty USB Root Hub on Main. Board


    If I had not attempted to the upgrade to Windows 8 Pro.,
    I would not be aware of this problem and the fact.
    “If It becomes necessary,” I cannot do a re install of windows 7 Pro.
    And I cannot Upgrade to Windows 8 Pro.
    The reason:
    Upon boot up from Windows 7 or Win 8 purchased DVD
    the following.
    “Windows encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use.
    Make sure any removable storage is properly connected and then restart your computer.”

    I/O Error 0xc00000e9 t
    End of Black Screen Message.

    As mentioned in my earlier posts, I was attempting an upgrade to
    Windows 8 Pro from my current O/S Windows 7 Pro 64 bit.
    That is what brought this major issue to my attention.

    It's important to understand that with my current install of
    Windows 7 Pro 64 bit - "everything" functions perfectly.
    No problem with boot-up - No problem with using the repair
    DVD I created during a system image backup.
    No problem using that repair disk to recover a backup image.
    No problems when Windows 7 is up and running.
    Further to that. Device Manager shows no conflicts and all attached
    drives appear in Disk Manager as they should.
    Tests:
    RAM test OK - Drives OK - Cables OK - DVD Burner - OK 750 Watt PS OK
    Video Card OK - All CPU temps below 105 F. M. Board Temp 89.6 F.

    After a lot of testing and research:
    I believe the problem is at USB Root Hub - USB1112 and USB910
    located at the bottom edge of P7P55D-E-PRO mother board, regardless
    of the fact, all the USB ports function when a flash drive or external
    HDD is attached.
    That said, there is an issue.
    A pop up message recently began to appear that reads
    “A USB device as not recognized.” That happened over and over
    until I removed the external HDD and disconnected the adapter and cable
    running from USDB1112


    Deduction:
    As mentionedearlier , only when booting from a Windows 7 or 8 DVD
    a black screen appears with the following message.

    “Windows is having a problem communicating with one of the devices attached to this computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use. Make sure any removable storage is properly connected and then restart your computer.”
    I/O Error 0xc00000e9
    End of black screen message:

    It is then, and only then, that this issue comes to the surface and stops an upgrade of Windows 8 or re install of Windows 7.

    In my opinion, If a USB Hub has hardware issue it can ruin your
    day or give you a reason to buy a new mother board due to a fault
    in the USB hub(s)

    Cheers,
    Paul
      My Computer

  2.    #2

    Are all other HD's and peripherals unplugged during the attempted install?

    Is this a disk you burned yourself? If so confirm ISO or download another, burn another DVD using ImgBurn at 4x speed, then try bootable flash stick install using Universal USB Installer with Win7 in dropdown menu.

    Run a Disk Check on all HD's and external HD's and flash sticks used on the PC.

    Check the logs, System Resources, establish a Clean boot and other Troubleshooting Steps for Windows 7
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:37.
Find Us