Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Fault code "system seems to no have libRCodec.dll."

05 Dec 2012   #1
PeterHargrave

windows7
 
 
Fault code "system seems to no have libRCodec.dll."

I have Windows 7 home installed on my Aspire one, I have tried to instal an IP security camera but I k
keep getting "Sorry. Your system seems to no have libRCodec.dll.
Having carried out a search on the web RegCure offered to rectify the issue,
Naving Purchased,installed and tried the software I have found no improvement and as such contacted RegCure requesting a solution or my payment back. However j
if anyone has come across and resolved this problem I would appreciate your help.

Thanks

Peter Hargrave


My System SpecsSystem Spec
.
05 Dec 2012   #2
Carl Lawrence

Dual-boot: Windows 7 HP 32-bit SP1 & Windows XP Pro 32-bit SP2.
 
 

Please update/complete your pc specs.
My System SpecsSystem Spec
05 Dec 2012   #3
Sir George

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by PeterHargrave View Post
I have Windows 7 home installed on my Aspire one, I have tried to instal an IP security camera but I k
keep getting "Sorry. Your system seems to no have libRCodec.dll.
Having carried out a search on the web RegCure offered to rectify the issue,
Naving Purchased,installed and tried the software I have found no improvement and as such contacted RegCure requesting a solution or my payment back. However j
if anyone has come across and resolved this problem I would appreciate your help.

Thanks

Peter Hargrave
Are you trying to install CMS Webcam Software for EASYN Remote Webcams? If so, This Software is for XP only, use the XP Compatibilty Mode and it should work.

In the future, I would suggest checking with the software vendor whenever you have problems with a product, they have a vested interest in attempting to solve your issue. RegCure is really only interested in selling their product which may or may not help.

HTH
My System SpecsSystem Spec
.

07 Aug 2013   #4
JerryNewman

Windows 7 Ultimate x64,
 
 

That dll is by default located at C:\Program Files (x86)\Central Management System\VF-E-E43-A1
Copy the libRCodec.dll into either:
If your Windows OS is 32bit use C:\Windows\System32 or
If your Windows OS is 64bit use C:\Windows\SysWOW64
My System SpecsSystem Spec
Reply

 Fault code "system seems to no have libRCodec.dll."




Thread Tools





Similar help and support threads
Thread Forum
Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"
Dear Experts, I have created windows image on Drive F: but delete it after some time manually due to some space prob. But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35...
Backup and Restore
Can't ID driverless devices "Base System Device" and "Broadcom USH"
There are 2 devices in the "Device Manager" that do not have drivers installed. I just did a clean install of Window 7 SP1 32-bit to a Dell Latitude E6500. I have uploaded all the Windows updates and all seems to be performing well. However, there are two devices in the "device manager" that do...
Drivers
BSOD "page fault in nonpaged area" just after system startup
I shutted down my computer this morning properly. When I turned it on in the evening I was forced to check filesystem. Filesystem errors were fixed, but after booting on in about a minute I got a BSOD: "page fault in nonpaged area". I've booted into safe mode and all works fine. I've tested...
BSOD Help and Support
Random "Bad Pool Header" and "System Service Exception" BSODs
I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs...
BSOD Help and Support
Multi-BSOD (Mainly "Modification of system code detected")
Windows 7 x64 I have installed a number of times due to OS corruption from the ridiculous amount of BSODing Retail Version of Win7 PC is almost 1 year - at least 7 months Running on this installation for around 3 months
BSOD Help and Support
"Return computer to factory condition" or "Use A System Image Crea..."
Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing! :confused:
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App