Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows 7 starter 64bit - wont execute several setups

09 Dec 2012   #1
nuclearz0r

Windows 7 64bit
 
 
windows 7 starter 64bit - wont execute several setups

hey,ill start from the beginning, booted windows 7 starter installation off a bootable diskonkey, and recieved a msg "no device drivers were found, make sure that the installation media contains the correct drivers and then click ok" so reading on some forums i realized i probably need the chipset + usb drivers for the asus eee 1001px which i was installing this windows on, loaded them on the diskonkey and ran the installation again, everything went through smoothly, now thing is that i came to install several of the drivers (wan/bluetooth) that i downloaded for asus's website destined for that specific model, the setup .exe files wont execute, they just pop a fast closing dos window and nothing is installed, what approach do you recommend? thank you.


My System SpecsSystem Spec
.

09 Dec 2012   #2
gregrocker
Microsoft MVP

 

The problem is almost always a bad installer. Confirm or download a new ISO and write to stick using Steps 1 and 2 in Clean Reinstall - Factory OEM Windows 7.

You will need to unlock Home Premium to have an all-versions menu to choose Starter using the eicfg removal tool
My System SpecsSystem Spec
09 Dec 2012   #3
derekimo

Microsoft Community Contributor Award Recipient

Windows 7 Pro 64 SP1
 
 

I think you may be talking about Home Basic, there is no 64bit Starter version.

Either way, Greg's post is the best method to resolve your issues.
My System SpecsSystem Spec
.


09 Dec 2012   #4
nuclearz0r

Windows 7 64bit
 
 

what if at the beginning of the installation when it asked me to browse for drivers i directed it to the chipset driver folder, and it found nothing, then i unticked the "hide incompatible drivers"(not sure if thats the exact text), and forced it to accept one of the 100's drivers from the list, and then it enabled me to continue with the installation.. why is it required anyway? what should have i done ?
My System SpecsSystem Spec
10 Dec 2012   #5
gregrocker
Microsoft MVP

 

Did you read what I wrote? The error is 99% of the time a bad installer.

I told you how to rewrite the flash stick correctly with the latest ISO.
My System SpecsSystem Spec
10 Dec 2012   #6
nuclearz0r

Windows 7 64bit
 
 

Ok so installed the 32bit home edition directed by the link you provided and copied using the flashing tool, same issues, i even tried installing a copy of winxp sp3 which i had already installed successfully before, copied it with that "novi..something" flashing tool, and at the beginning of the installation it states that files are missing from several source dirs, even tho that the files are evidently present. Does it matter if i run the flashing tool through an os of the same version? I just ran out of ideas.. Made sure bios settings are correct the only abnormality i found on this pc is that its hdd is splitted to 4 partitions which out of 1 is inactive. Help
My System SpecsSystem Spec
10 Dec 2012   #7
RoasterMen

Windows 7 Professional 64-bit
 
 

Uhmm, I've never heard of 64-bit version of Windows 7 Starter.
My System SpecsSystem Spec
10 Dec 2012   #8
nuclearz0r

Windows 7 64bit
 
 

Quote   Quote: Originally Posted by RoasterMen View Post
Uhmm, I've never heard of 64-bit version of Windows 7 Starter.
That was a mistake, its x86, too late for editing the subject
My System SpecsSystem Spec
10 Dec 2012   #9
gregrocker
Microsoft MVP

 

If you are sure you have the full ISO downloaded and unlocked by running the Ei.cfg Removal Utility on it, and writing to stick with the MS download tool fails, then use How To Use UltraISO Software To Create Bootable USB Flash Drive which has never failed for me.

This time wipe the HD first with Disk - Clean and Clean All with Diskpart Command from the booted installer's Command Line accessed by pressing Shift + F10 at first screen when booted.
My System SpecsSystem Spec
Reply

 windows 7 starter 64bit - wont execute several setups




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 starter on E-PC wont boot, command line not accessable
I think I'm at the end of the road. While running ccleaner and in the middle of cleaning the registry, the battery died without warning and this asus Eee Pc hasn't booted since. I found some info on this forum regarding accessing command line through system recover options and then reverting to a...
General Discussion
Windows 7 wont recognize or execute files on (D): drive only
Hello Sevenforum, first thing thank you for taking the time to read this and help me out. I'm recently having issues with my computer. I had a perfectly working Seagate Barracuda 3TB drive running with 1 NTFS partition for backup (HTML, EXE, MP4, RAR, OBJ, JPEG, PDF). For some reason i decided...
General Discussion
Win7 starter disc wont wont restore system
Hi girls n guys please help me problem is with a samsung net/notebook when powered on it wont load up windows / it looks like it freezes after the "windows bar comes up for a minimum of 4 secs" then goes no further ? tryd to use the wind recovery disc to "repair pc" it loads up windows...
Backup and Restore
Upgrading 32 bit to 64 bit windows 7 and CD wont execute.
Hey everyone, im having a problem here. Im trying to upgrade my 32 bit home premium to 64 bit professional. I bought the new key from the student website and downloaded the files and extracted them. Then i burned those files onto a DVD and restarted my computer and modified the BIOS to have the...
Installation & Setup
Windows 7 Home Premium 64bit & Windows 7 Starter 32 bit (partitions)
I have just purchased a new pc that came with Windows 7 Home Premium 64-bit, which wont run my company software, which was made in 1995, 16 bit. This 16bit software ran fine on my previous pc, which had Windows 7 Starter 32-bit. But the 64 bit Windows 7 version wont run it, I cant use Windows...
Installation & Setup
Windows 7 64bit wont boot!!!!
HI, I did a clean install of windows 7 64bit on my system today. And by clean I mean a very clean install. I wiped all the contents on my HDD. That is even as far as removing the partitions and redoing them in the settings I chose to run win7 on. Anyhow, after the installation, which goes...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App