Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Booting problem with my Lenovo Ideapad Y560

09 Jan 2013   #1
hasan2012

Windows 7 Utimate Sp1 x64
 
 
Booting problem with my Lenovo Ideapad Y560

Good morning everybody,

I have bought my laptop 1 year ago and everything was going ok, i installed many programs (Adobe illustrator) and games (PES2011) and many others and i faced no problems.
One day, my cousin used the laptop to watch a new movie but he forgot to charge the battery during that time until the laptop shuts down alone due to empty battery.
On the next day, i tried to power on my laptop it starts normally until it reached the Windows 7 logo it automatically shuts down. I tried again for several times with the same result then a blue screen with white writings on it was displayed on the screen (harddisk failure).
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.

I make the following points to try to restart the laptop but always with the same result:
1- Remove the new HDD and then insert it
2- Remove the Rams and then insert them
3- Remove the battery and then insert it.

Laptop Description
Lenovo IdeaPad Y560:
Intel Core I3
4GB Ram
ATI Mobility Radeon HD 5730

Please I need your help in solving this problem ASAP and thanks in advance


My System SpecsSystem Spec
.

09 Jan 2013   #2
marsmimar

Microsoft Community Contributor Award Recipient

Win 7 Pro 64-bit
 
 

Hello Hasan and welcome to Seven Forums.

Please forgive me but I'm a little confused. You say:

Quote:
I bought a new Toshiba 500GB HDD and burned a new Windows 7 Ultimate x64 DVD to install a fresh new copy of it but i have faced the following:
1- when I power on the laptop it works normally.
2- I press F12 to choose the device to boot from (Boot from DVD)
3- It starts normally and a windows 7 screen appears with a loading bar. It is filled quickly in the first time then a new screen appears with a loading bar starts to fill but after around 75% of the loading bar is filled the laptop shuts down.
I tried to restart it for several times with the same result.
- Are you replacing the original laptop hard drive with the new Toshiba or is the Toshiba an external USB hard drive?
- Are you trying to clean install Windows 7 Ultimate x64 to the original laptop hard drive or to the new Toshiba?
- Where did you get the ISO file for Windows 7 Ultimate?
My System SpecsSystem Spec
10 Jan 2013   #3
hasan2012

Windows 7 Utimate Sp1 x64
 
 
Re: Booting problem with my Lenovo Ideapad Y560

Hello Marsmimar and thanks for your reply,

Yes I replaced the original WD HDD that was damaged with the Toshiba 500GB HDD and i am trying to install Widows 7 to the new Toshiba.
I took the ISO file from my friend who installed it on his laptop and is working properly.
My System SpecsSystem Spec
.


10 Jan 2013   #4
marsmimar

Microsoft Community Contributor Award Recipient

Win 7 Pro 64-bit
 
 

Thanks for the clarification.

After installing a new hard drive, you must partition it (and then format it) before it can be used by Windows 7. Did you do that? These articles should help explain the process.

How To Partition a Hard Drive in Windows 7

How To Format a Hard Drive in Windows 7

Once the new drive has been partitioned and formatted you should be able to install Windows 7. However, you can't use the ISO file itself for the installation. The ISO has to be burned to to a blank DVD and then that DVD becomes the installation media. If the ISO was burned to a DVD and that's what you're trying to use, it's possible that the DVD became damaged in some way and that's why it isn't working for you. You could always download your own clean ISO file, save it to desktop, and then burn it to a new DVD. You can get the ISO from here.

Just a friendly reminder: during the installation process you will be asked to re-activate Windows 7. You will need the 25-digit Product Key that came with your computer. The Product Key is tied to that machine and the original version of Windows 7 that was on the machine when you bought it.

Activate Windows 7 on this computer
My System SpecsSystem Spec
10 Jan 2013   #5
hasan2012

Windows 7 Utimate Sp1 x64
 
 

I think that you haven't understand me clearly.
The problem is that whenever i try to power on the laptop , it will automatically shut down after 1 min.
When I boot the laptop it shows the Lenovo start up screen and starts in loading widows 7 but after 1 min it shuts down.
I tired to press F2 that transfers me to the settings but also after 1 min the laptop automatically shuts down.
My System SpecsSystem Spec
10 Jan 2013   #6
marsmimar

Microsoft Community Contributor Award Recipient

Win 7 Pro 64-bit
 
 

Quote:
Yes I replaced the original WD HDD that was damaged with the Toshiba 500GB HDD and i am trying to install Widows 7 to the new Toshiba.
I guess I'm not understanding you. So you did install Windows 7 and it's not working? Maybe there was a problem with the installation. I'd try it again. Make sure you follow all the steps in this tutorail.

Clean Install Windows 7

You may also have a hardware problem. Maybe the new Toshiba is defective.
My System SpecsSystem Spec
10 Jan 2013   #7
gregrocker
Microsoft MVP

 

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. Next if an EFI BIOS, enable Legacy BIOS, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. We are creating the partition here to mark it Active which overcomes certain install failures.
My System SpecsSystem Spec
11 Jan 2013   #8
hasan2012

Windows 7 Utimate Sp1 x64
 
 
Booting problem with my Lenovo Ideapad Y560

Thanks gregrocker for your help.
I will try these steps and i hope it will work.
My System SpecsSystem Spec
12 Jan 2013   #9
hasan2012

Windows 7 Utimate Sp1 x64
 
 
Booting problem with my Lenovo Ideapad Y560

I Boot into BIOS setup, reset to defaults, save changes. Next if an EFI BIOS, enable Legacy BIOS, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.
It restarts and boots from the DVD drive and a Windows 7 screen appears with a loading bar in the bottom of the screen and with the same results.
It shut down after it became around 75% of the loading bar.
My System SpecsSystem Spec
12 Jan 2013   #10
gregrocker
Microsoft MVP

 

Then from the link provided download another ISO for your licensed version and burn to DVD using tool provided.

if that fails write it to flash stick to see if it stalls the same. That would indicate a hardware prob. Test your HD and RAM from Troubleshooting Windows 7 Failure to Start
My System SpecsSystem Spec
Reply

 Booting problem with my Lenovo Ideapad Y560




Thread Tools





Similar help and support threads
Thread Forum
Lenovo Y560 Internet not working
Okay. this is very creepy. My internet notification is showing an internet connection but Neither chrome nor any other application access the internet - like League of Legends and Origin. Any ideas?
Network & Sharing
Bluetooth not working on Lenovo Y560
The bluetooth notification is not there. When I try to send a file via "Send To", this is what is displayed :-
General Discussion
Lenovo Ideapad Y560 shows blank screen after booting
I am not able to update my VGA driver with any other than ATI Mobility Radeon HD 5730. However when I boot having this driver keeps my screen blank till I have to reboot it in Safe Mode and choose Standard VGA driver. I have attached my MiniDump folder with this thread. What shall I do? ...
Drivers
Lenovo Y560 ATI driver with switchable graphics question
Hi, I have also posted this in Lenovo's forum, but perhaps someone here have a solution as well. Recently my HDD crashed, so I plugged in a new HDD with a fresh Windows 7 Professional 64bit. I am trying to install the driver for my ATI HD 5730. I downloaded the driver from the Lenovo support...
Graphic Cards
Lenovo Ideapad Y560, win 7 64 install problem
Hi allways I got this notofication, No dewice driver where found, make shure that the installation.... About week ago i install from same dvd on brand new ideapad G780 and got same problems, but then I found on lenovo site driver and is worked. I try use that same driver for Y560 and no work....
Installation & Setup
Lenovo Ideapad Y560 "black screen in boot up after windows 7 logo"
I need help and suggestions on what to do with this black screen crisis. Mine is a little different that others. so sorry if this is a repeated thread. ive looked everywhere, and no one has the issue when they have dual boot. laptop description: I have dual boot on my laptop with windows 7...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App