Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows failed to start, cannot repair, no backup, restore or repair

16 Jan 2013   #1
cutebutstupidXD

windows 7 ultimate x32
 
 
windows failed to start, cannot repair, no backup, restore or repair

PLEASE SOMEONE HELP ME.
35+ startup repair attempts and still no dice
Windows failed to start.a recent hardware change may be the cause.
Start up repair cannot repair this computer automatically.
Windows cannot find a system image on this computer
No restore points
No backup or repair discs
Bluescreen/crash with safemode, memory diagnostics tests, and attempts to restore to"out of box" state
Everything redirects to startup repair or start windows normally,
Repair option ends in cannot repair message, start normally ends up in bluescreen/crash and restart.

View problem details> problem event name: startuprepairoffline
Problem signature:
01: 6.1.7600.1.16385
02: 6.1.7600.1.16385
03: unknown
04: 21199963
05: autofailover
06:35
07: bad driver
OS version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Root cause found:
Startup repair has tried several times but still cannot determine the cause of the problem.
I can access the command prompt box but I'm unsure of where to go from there. It is the only thing I've been able to run without bluescreens popping up and shutting down my laptop. Can any one help me restore my POS back to an operable state through there?
I am aware of f key functions, and have attempted setup utility options boot options and still I'm stuck.
I'm stuck with a never ending startup repair/bluescreen fail/system recovery loop


My System SpecsSystem Spec
.
16 Jan 2013   #2
azasadny

Microsoft Windows 8.1 Enterprise 64-bit
 
 

Dead hard drive? Does the hard drive show up in the BIOS?
My System SpecsSystem Spec
16 Jan 2013   #3
gregrocker

 

If the HD does show up then work through these steps for Troubleshooting Windows 7 Failure to Start which provide everything needed in the steps. Ask back if you have any questions and keep us posted on your progress.
My System SpecsSystem Spec
.

18 Jul 2014   #4
awesome19sunny

Windows 7 Ultimate x64
 
 

i have the same problems as after using diagnostics, system automatically goes for repairing but stucks at blue screen
My System SpecsSystem Spec
18 Jul 2014   #5
gregrocker

 

Is the hard drive detected in BIOS setup? Reset to defaults.

Which steps have you performed so far from tutorial in my last post?
My System SpecsSystem Spec
18 Jul 2014   #6
awesome19sunny

Windows 7 Ultimate x64
 
 

yes hard drive shows in bios, and i have apply defaults, but again it hangs at blue screen in repairing option.
My System SpecsSystem Spec
18 Jul 2014   #7
gregrocker

 

Continue with the steps for Troubleshooting Windows 7 Failure to Start
My System SpecsSystem Spec
Reply

 windows failed to start, cannot repair, no backup, restore or repair




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 crashes on startup. Can't restore, repair or repair install
All of a sudden, my computer crashes every time when starting up the computer. When it gets to the "Windows" screen with the small moving dots that form the windows logo, it crashes just as they start their animation. I've tried using Startup Repair, as well as command line repair (possibly the...
General Discussion
start up repair failed to automatically repair computer
Apparently my computer had double files on the c drive so I deleted ten yesterday, before running a disk clean up. I also deleted several miscellaneous programs (not on C) installed when I bought it. today however it failled to start normally. I've tried what was recommended on system recovery...
Software
'Windows failed to start' message on boot, but nothing to repair?
I have an intermitant problem where I get 'Windows failed to start' with the options 1.Start windows normally 2.Launch system repair. If I select 1. It will run for well over an hour and give a 'cannot repair message' after which it boots normally anyway. If I select 2. It boots fine with no...
General Discussion
Windows failed to start, unable to run system repair, help!
Ok, I have been combing through threads here hoping to find a solution, but none of the things I've tried have worked, so I'm going out on a limb hoping for some suggestions! I have a Samsung netbook (n145) which has had a few issues starting up over the past couple months - it would prompt to...
BSOD Help and Support
Restore Windows.old on new Windows 7 install as repair failed.
I installed a new MOBO last night (17/02/2012) and booted up and my Windows 7 could not boot. It went into repair mode and could not repair. So I installed a new Windows 7 and now see the Windows.old folder. I would like to recover the huge amount of settings and personalisation from the old...
Backup and Restore
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App