Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Start Up + random programs stopped working

16 Jan 2013   #1
rorocwalker

Windows 7 Home Premium 64bit.
 
 
Start Up + random programs stopped working

Hi,

Today, I opened my PC and as soon as I logged on, Catalyst Control Center: Monitoring program, Windows Desktop Gadgets, ButtonMonitor and OOTag stopped working, all at the same time. I ignored it but the weird thing is there's a new option I've never seen before called ''Debug the program'' but it says No registered JIT debugger [...].

Anyhow, I went and tried to open a game, it immediately, without even trying to load the game itself, say '' 'X' is not responding''.
I tried opening Events Viewer to see what I could have done, but it also crashes and say Microsoft Management Console has stopped working.

I opened system restore to see what points there were and I noticed windows updates' at around 5 am, I do not even recall having updating something.

So, I update my graphic card (which it was already), I then looked through my updates and update to Windows 7 service pack 1 a few hours ago + windows 7 x64 based updates. Restarted my PC, nothing changed.

Any idea on what might be the issue? It really happened randomly, I did nothing unusual before opening my PC for the first time today, it's plain random. I even tried the repair windows update when you boot it with F8, didn't work, my Anti-virus, NOD32 ESET 5 didn't capture any malware. I downloaded SuperAntispyware, I did a complete scan 3 times, all I got was cookies, no malwares whatsoever. Also, I fixed all my registry issues with CCleaner. I re-formated my PC about 3 weeks or a month, so it's quite new.

Not quite sure which category it goes so I put it in general.

-Thank you


My System SpecsSystem Spec
.
16 Jan 2013   #2
indianacarnie

 

Did you do an actual restore? Have you ran a sfc/scannow?
My System SpecsSystem Spec
16 Jan 2013   #3
rorocwalker

Windows 7 Home Premium 64bit.
 
 

I didn't restore, and what is sfc?
My System SpecsSystem Spec
.

16 Jan 2013   #4
rorocwalker

Windows 7 Home Premium 64bit.
 
 

Alright, I did a sfc /scannow.
This is the log.


Attached Files
File Type: txt sfcdetails.txt (47.1 KB, 6 views)
My System SpecsSystem Spec
17 Jan 2013   #5
indianacarnie

 

Do it twice more. Rebooting each time. That should fix most anything wrong there. How far back do your restore points go?
My System SpecsSystem Spec
17 Jan 2013   #6
rorocwalker

Windows 7 Home Premium 64bit.
 
 

I rebooted three times, it doesn't seem to have solved anything.
I updated my Windows 7 SP 1 right after my issue began, thinking it would fix the issue so my restore points went to when I installed Win7 SP and deleted the rest.
Also, here's the details of some of the crashes if it can help.

Trying to open Event Viewer (Microsoft Management Console);

Description:
Stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.1.7600.16385
Application Timestamp: 4a5bc808
Fault Module Name: mscorwks.dll
Fault Module Version: 2.0.50727.5466
Fault Module Timestamp: 503ef7aa
Exception Code: c0000005
Exception Offset: 000000000027bd44
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105


Catalyst Control Center: Monitoring program ;

Description:
Stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: MOM.exe
Application Version: 2.0.0.0
Application Timestamp: 4f2058d9
Fault Module Name: mscorwks.dll
Fault Module Version: 2.0.50727.5466
Fault Module Timestamp: 503ef7aa
Exception Code: c0000005
Exception Offset: 000000000027bd44
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Windows Desktop Gadgets ;

Description:
Stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: sidebar.exe
Application Version: 6.1.7601.17514
Application Timestamp: 4ce7a1c7
Fault Module Name: mscorwks.dll
Fault Module Version: 2.0.50727.5466
Fault Module Timestamp: 503ef7aa
Exception Code: c0000005
Exception Offset: 000000000027bd44
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105



*I don't know if it makes sense or can help but the fault module name is always : mscorwks.dll which seems to be related to .NET framework, I'll try to re-update it and see what happens.*

Updating .NET framework and Microsoft Visual didn't work.

Edit;
After browsing for .NET framework crashes on google...I think it might be the problem. But now..,how do I fix it?
My System SpecsSystem Spec
17 Jan 2013   #7
rorocwalker

Windows 7 Home Premium 64bit.
 
 

This is getting irritating, I've almost tried everything to try and fix .NET framework
Anyone had success with this issue?
My System SpecsSystem Spec
17 Jan 2013   #8
rorocwalker

Windows 7 Home Premium 64bit.
 
 

Also, I went through my update history and saw that there were a couple of updates that included .NET framework on the day of the issue...I'll try to system restore to the earliest point (even though at that point, the issue was still there).
My System SpecsSystem Spec
17 Jan 2013   #9
gregrocker

 

When Win7 becomes unbootable after Updates the solution is to System Restore to before the Updates.

Use System Recovery Options: If System Restore fails, then run Startup Repair up to 3 separate times. Report back results.

Otherwise start working through these steps for Troubleshooting Windows 7 Failure to Start
My System SpecsSystem Spec
17 Jan 2013   #10
rorocwalker

Windows 7 Home Premium 64bit.
 
 

Quote   Quote: Originally Posted by gregrocker View Post
When Win7 becomes unbootable after Updates the solution is to System Restore to before the Updates.

Why would you go and only look at your Resore Points? Hello? Did you wave?
What? I didn't get the last sentence.

And as I said, all my restore points were deleted after I updated to Win7 SP 1, which I updated a couple of hours after my issues.

I am almost sure, actually I'm positive that a windows update that had to do with .NET Framework caused this issue...and by the way, I restored my PC to when I updated to Win7 SP 1 but during the process it said ''Failure configuring Windows Updates Reverting changes Do not turn off your computer'' yet...it said it successfully restored windows when it rebooted after this message....BUT! Now whenever I try to open System Restore, it says ''System Restore does not appear to be functioning correctly on this system. [...]''

It just gets worst...and I really do not want to re-format as I did it only 3 weeks ago.

Also, I'll try to play in the System Recovery Options following the links you provided me with. I'll come back with news to see how it worked out.
My System SpecsSystem Spec
Reply

 Start Up + random programs stopped working




Thread Tools




Similar help and support threads
Thread Forum
3 programs stopped working, I think Windows updates are responsible
I have 3 programs that stopped working, they will not load up, and I believe that The latest Windows updates are responsible. These programs are Inworldz Beta Viewer, Imprudence Viewer, and Second Life Viewer. They have always worked fine for me until Wednesday when suddenly none of them would...
Windows Updates & Activation
after fresh install no programs are installing or stopped working
hi all this issue has been givingh me sleepless nights for a few days now, after fresh install of os i cart get any programs to install comes up saying either stopped working or cart be installed, i do manage to get my wifi driver installed and few other little programs but nothink major as in...
General Discussion
Programs Stopped Working as Soon as they are started
Problems: some programs cannot be run, stopped working as soon as it is opened I came to recognize my problem when McAfee pops up to check database update, but when I click "Check Now" it stopped working. After that I tried numerous times after a few restart tries. Even in my attempt to uninstall...
General Discussion
Many programs 'stopped working' - what's the reason
Hello to all on this forum, Some time ago I restored system and after doing that some of the programs, like Autocad, Livemail, and some other .exe do not launch. It's just said 'program has stopped working and will be closed'. If it's about Live Mail, I tried almost everyghing - sfc...
General Discussion
Windows 7 stopped working, Cant start antivirus programs or anything
Hi... Im having the same issue las good 10 days. Im using my computer at work so I can go on here and ask for help. My Toshiba satelite laptop, running on windows & home premium restatrted by it self and when it came back lots of things were different. -The web cam meny box on the side(or top)...
Performance & Maintenance
Most programs stopped working on my Win7 Ultimate x64
I have Win 7 Ultimate x64 installed on my pc. I had no trouble at all in the past. In the last few days though, I had programs like Paragon Partition Manager 11 Demo which stopped working where before I had no problems with. Each time I try to start it, it gives me error; " a part of paragon...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App