Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hibernate Windows 7 Build 7600 64-Bit Ultimate


05 Oct 2009   #1

Windows 7 Build 7600
 
 
Hibernate Windows 7 Build 7600 64-Bit Ultimate

I've been runing this build for about a month.
The sleep function seems to work fine.
Hibernate never comes back, it always just restarts the computer.
And if during sleep the battery thinks it is too low the switch to hibernate never comes back.
This is particularly painful since the Mirroring goes back into RESYNCING.

Laptop is an HP HDX-18 with 4GB and dual 500GB (mirrored) SATA drives.
The hiberfil.sys is 4GB

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>powercfg -h -size 100
The hiberfile size has been set to: 4292026368 bytes.

C:\Windows\system32>systeminfo
Host Name: NA
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: UNKNOWN
Registered Organization: Hewlett-Packard
Product ID: #####-###-#######-#####
Original Install Date: 8/12/2009, 7:19:50 PM
System Boot Time: 10/5/2009, 9:58:39 AM
System Manufacturer: Hewlett-Packard
System Model: HP HDX 18 Notebook PC
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~2534 Mhz
BIOS Version: Hewlett-Packard F.13, 12/5/2008
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-05:00) Eastern Time (US & Canada)
Total Physical Memory: 4,093 MB
Available Physical Memory: 2,069 MB
Virtual Memory: Max Size: 8,185 MB
Virtual Memory: Available: 5,855 MB
Virtual Memory: In Use: 2,330 MB
Page File Location(s): C:\pagefile.sys
Domain: SOMETHING
Logon Server: \\NA
Hotfix(s): 3 Hotfix(s) Installed.
[01]: KB972636
[02]: KB973874
[03]: KB974332

My System SpecsSystem Spec
.

05 Oct 2009   #2

Windows 7 Ultimate x64 OEM
 
 

I had a problem with hibernation restarting my computer, and finally figured out that there is a problem with your BCD (Boot Configuration Data Store) in the boot folder (ex: C:\boot\bcd). Most likely its a problem with the "Resume from Hibernate" section of the BCD which points your computer in the direction of the operating system to resume from and to. You can edit/view your BCD by opening up command prompt and using the command bcdedit /? for a list of options. Anyway I tried everything to fix the hibernation problem, including using EasyBcd, but the only thing that worked was installing another copy of windows on a different partition, this rewrites the BCD. Then you can uninstall that extra Operating System. Now the BCD should be corrected. Hope this helps, I couldn't find any info on this subject for months so I just played around with the BCD, and installing another OS
My System SpecsSystem Spec
05 Oct 2009   #3

Windows 7 Ultimate x64 (Retail)
 
 

Wouldn't doing a startup repair, or a repair install, also rewrite the BCD?
My System SpecsSystem Spec
.


07 Oct 2009   #4

Windows 7 Ultimate x64 OEM
 
 

I think so, but if you have multiple partitions, the location that startup repair writes the new BCD to might not be the actual partition that you are booting from. This is, of course , what I have observed.
Lastly, keep in mind that the partition containing the BCD you will actually boot from, should be set as "system" partition. For me, startup repair never seemed to get it right when it came to rewriting that actual BCD.
My System SpecsSystem Spec
07 Oct 2009   #5

Windows 7 Ultimate x64 SP1
 
 

Here are two other options to try before reloading.
1) HP has been updating a lot of the laptop firmwares for the upcoming OS so look there and see if your laptop has a new Firmware that will fix the problem.
2) Go into a command prompt as an Admin turn the hibernation function off this will delete all the hibernation items and reboot the machine. Then go back into the command prompt and turn hibernation back on. This will recreate all the system files for it and see if that works.
My System SpecsSystem Spec
Reply

 Hibernate Windows 7 Build 7600 64-Bit Ultimate




Thread Tools



Similar help and support threads for2: Hibernate Windows 7 Build 7600 64-Bit Ultimate
Thread Forum
windows 7 build 7600 is not genuine? help please Windows Updates & Activation
Solved Windows build 7600 not genuine Windows Updates & Activation
Windows 7 Ultimate Build 7600 This copy of Windows is not genuine Windows Updates & Activation
Windows 7 Build 7600 is not genuine Windows Updates & Activation
Windows 7 RTM Build 7600.16399 , Is this a.. General Discussion
Install Windows 7 build 7600 Installation & Setup
Windows 7 RTM Is No Go 7600 Not the Gold Build News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:39 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33