Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: beep code problem

06 Feb 2013   #1
mervzter

Windows 7 Ultimate 32 bit
 
 
beep code problem

Motherboard: Foxconn M61PML-K
RAM : Kingston 2 Gig/DDR3 1333
BIOS: AMI

Scenario: PC turn on but no display, but after trying some troubleshooting afterwards its getting Non Stop SHORT BEEP same as when i remove the RAM, Since i already check some beep codes for ami ive never seen beep code like this. i dont have any xtra RAM to try but i will try to find soon, but as of now i need some opinion if do u think its really a ram problem. thanks in advance


My System SpecsSystem Spec
.

06 Feb 2013   #2
Cranky69

Windows 7 Home Premium 64bit
 
 

Make sure your RAM is fully seated, and if you have a graphics card make sure it is fully seated, and the electrical connection is tight(that is, if it has a electrical plug)
My System SpecsSystem Spec
06 Feb 2013   #3
alboyiscool

Windows Vista Home Premium x86
 
 

I think it is a RAM module problem too. I would suggest trying the computer with one RAM module in at a time. If the problem still persists, get some new RAM modules and the problem should be solved. Let me know if it works and remember to mark the problem as solved if it does
My System SpecsSystem Spec
.


06 Feb 2013   #4
mervzter

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by Cranky69 View Post
Make sure your RAM is fully seated, and if you have a graphics card make sure it is fully seated, and the electrical connection is tight(that is, if it has a electrical plug)
im pretty sure that the graphics card is fully seated, i tried the integrated graphics port too and same thing, also i tested the graphics card into another unit and its works.. thanks
My System SpecsSystem Spec
06 Feb 2013   #5
mervzter

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by alboyiscool View Post
I think it is a RAM module problem too. I would suggest trying the computer with one RAM module in at a time. If the problem still persists, get some new RAM modules and the problem should be solved. Let me know if it works and remember to mark the problem as solved if it does
it has only one ram sir, and i dont have any FRU but i will try test it soon if i find one and i will let you know.. thank you
My System SpecsSystem Spec
07 Feb 2013   #6
alboyiscool

Windows Vista Home Premium x86
 
 

Oh, I see. Trying it with a different RAM Module (when you get them) may solve the problem (hopefully!)
My System SpecsSystem Spec
17 Feb 2013   #7
mervzter

Windows 7 Ultimate 32 bit
 
 

I finally solved the problem, this board is choosy in terms of RAM brand , since i tried kingston it gives an error but its all good when i tried different ram.
My System SpecsSystem Spec
Reply

 beep code problem




Thread Tools





Similar help and support threads
Thread Forum
one beep long followed two beep short
Is my video card has this code? A while ago it takes time i open my notebook i'm worried this is second time it happened.
General Discussion
Random BSOD with beep code 1 long 3 short
Hi, I keep experiencing random crashes. Due to the fact that it happens at any time I can only provide the information attached in the zip. I still hope some kind and knowledgeable soul will be able to help me out. :) 32 bit clean 3 year old install full retail 3 year old system
BSOD Help and Support
New problem - Not getting a POST beep
Hi again, Fixed the old problem of the computer rebooting.. I just gave up and awaited a new CPU through the post. Fitted the new CPU, now when I boot it up I'm not getting any POST beeps or display through monitor. I've read topics around tinternet and everybody says it's mobo or CPU. ...
BSOD Help and Support
Beep code 4-2-3-3 when ATI HD5770 inserted into Supermicro C2SBX board
Currently running a Supermicro C2SBX with fanless Gigabyte ATI HD4850 inserted. It's been running fine for two years. Dual monitors. I recently replaced my old CRT monitor with a new LCD monitor, so now I have two 24" Eizo monitors (each running at 1920x1200). Unfortunately, the HD4850 only...
Graphic Cards
No display, beep code or boot after Sleep Mode
Hi, I've seen like a million other threads for this particular problem with just about every kind of possible solution there could be. However, as no two computers can be identical, I'd give it a shot and get some help on this one. After attempting to resume Win7 from Sleep, none of my...
General Discussion
mobo beep code
I just realized that I get this one short beep right after I push the power button to turn on my machine. Then it boots up and runs just fine. After looking back through my A+ Managing and Trouble shooting PC book and found out that it's normal to here one or two short beeps that informs me that...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App