Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Attempting to Upgrade to Ultimate. Problems with disk Management

06 Feb 2013   #1
shanuck

Windows 7 Ultimate
 
 
Attempting to Upgrade to Ultimate. Problems with disk Management

I tried to clone my HD to SSD and messed it up good, so now i have a fresh copy of Ultimate. I just need some advice on how to partition these drives, and set up for a successful install on my SSD


Partitions
C: (NTFS) 80575 MB (21030 MB free)
E: (NTFS) 19023 MB (18923 MB free)
F: (NTFS) 70379 MB (1055 MB free)
H: (NTFS) 856.8 GB (672.6 GB free)
I: (NTFS) 99 MB (67 MB free)
J: (NTFS) 47 MB (19 MB free)
O: (NTFS) 368.4 GB (368.3 GB free)
S: (NTFS) 76316 MB (76224 MB free)
Total Size 1465.9 GB (1155.5 GB free)

THE DISK 4 IN DISK MANAGEMENT WAS A RAMDISK I CREATED WITH AMD RADEON RAMDISK


Problems & Suggestions
Problem Disk free space is only 1% on drive F:.



I was following a Tut using
True Image 2013
EASEUS Partition Manager 9.1.0

This is the specs of my SYSTEM, thanks for any advice you can give

DualCore AMD A6-5400K, 4300 MHz (43 x 100)
Asus F2A85-V Pro (2 PCI, 2 PCI-E x1, 3 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)
NVIDIA GeForce GTX 550 Ti (1048256 KB)
16331 MB (DDR3-1600 DDR3 SDRAM)
DirectX 11.0
Microsoft Windows 7 Home PremiuM

After messing up this screenshot, I see how I could mess up an SSD upgrade now.. lol

-snip2.jpg




My System SpecsSystem Spec
.
06 Feb 2013   #2
AddRAM

Windows 7 Professional x64 Service Pack 1
 
 

You should have just used windows imaging, works like a charm.

How did you manage to turn disk 3 dynamic ? Using windows disk management to make partitions ?

Are you trying to put C onto S ?
My System SpecsSystem Spec
06 Feb 2013   #3
shanuck

Windows 7 Ultimate
 
 

I didnt even know about it, is it too late now, The only drive I want to save is H (Teradactyl) I did not name it... but I have moved all install folders and updates to that drive, I got lost in "cloning" and "copying" I still am not sure I understand..


ALSO can I run the SCCANNOW on the F drive to see if my "COPY" of C: is correct? I would like to keep that drive (Only if it is usable as a a backup of my Home Premium)
My System SpecsSystem Spec
.

06 Feb 2013   #4
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

How did you get into that mess?
I personally would backup your data & do a clean install to the SSD, with all other HDD Physically disconnected.
Make the Windows 7 SSD, disk0 & first HD boot in BIOS.Also connected to the first Sata port on the MOBO.
My System SpecsSystem Spec
06 Feb 2013   #5
AddRAM

Windows 7 Professional x64 Service Pack 1
 
 

That really is a mess isn`t it. I agree, unplug all the drives but the SSD and install windows to it. Then try to clean up that mess. And what`s up with all the unallocated space. The 149 GB drive should be 1 entire partition, it`s to small to break up. Get rid of disk 4 whatever that is.

Another tip, if you want to. I rename my dvd/cd drive letters to the last letters of the alphabet, X Y Z etc. so any partitions I make grab the lower letters.

Just an Example:
My System SpecsSystem Spec
06 Feb 2013   #6
gregrocker

 

Once you've done the Clean Install Windows 7 to SSD, install Easeus Partition Manager, plug back in the Win7 HD to convert it from Dynamic to Basic. You can then boot it if desired using the one-time BIOS Boot Menu key or access its data from the SSD.

If you still need to image over the OS from HD to SSD download pw422.zip ISO - Windows Live burn to CD using Windows Image Burner, boot it, click on Dynamic HD to highlight it, follow How to convert dynamic disk to basic disk with Partition Wizard?

Then use Macrium - Image your system or free Acronis premium imaging/cloning app which comes with any WD or Seagate HD in the mix to image or clone over the OS partition to SSD, choosing Auto driver letter, Primary Active partition including the MBR and Track0. Once cloned/image unplug all other HD's to try booting SSD, if it doesn't boot confirm with PW CD it's marked Active then run Startup Repair - Run up to 3 Separate Times
My System SpecsSystem Spec
06 Feb 2013   #7
shanuck

Windows 7 Ultimate
 
 

Thanks everyone, I knew it was a mess, but thanks everyone, and I should have came here first!! A+++++
My System SpecsSystem Spec
06 Feb 2013   #8
FuturDreamz

Windows 8 Pro (32-bit)
 
 

Seems like H: is in an extended partition (hence the green border). I don't believe extended partitions can be shrunk or extended.

I'd reccommend moving everything to O: (which is empty and appears to be big enough), then delete all partitions on H:'s drive (there will be two) then make a new partition the entire size of the drive.
My System SpecsSystem Spec
Reply

 Attempting to Upgrade to Ultimate. Problems with disk Management




Thread Tools




Similar help and support threads
Thread Forum
attempting to make disk defragmentation manual
Hi Brink, I was attempting to make disk defragmentation manual but the options are that I see is to turn off scheduled defragmentation ? Is that the same as making it manual ? Cheers.
Hardware & Devices
Attempting repairs... Reparing disk errors.
Plz help my computer that ive had for about a week now was running fine starting up and all that was good. Then the other day i started it up but it was stuck on starting windows so i tried restarting it and it put me in startup repair so i left it on for about 8 hours and it was stuck on the sam...
Hardware & Devices
Successful Anytime Upgrade Home prem. to Ultimate, problems next day
I am in the middle of another windows nightmare right now. I just purchased an anytime upgrade for my laptop and desktop (both OEM 64bit home premium to Ultimate), and rebooted and everything was fine on both. However, I noticed that some elements of Windows were missing. The Local Security...
General Discussion
WD10eals not showing up disk management Windows 7 Ultimate 64
i just upgraded to Windows 7 ultimate. I have 2 striped 250g sata running my OS. 1 IDE 150gb as back up and another 1TB SATA as back up. all my drives are reconized in my BIOS and all but my 1TB WD is showing up in my disk management and device management. All my drives have been formated and...
Hardware & Devices
Memory management error when attempting to install Windows 7 64-bit
I am trying to use all the 4 GB of RAM that I have for my computer so I decided to "upgrade" to 64-bit. The only problem is that when I boot from the installation CD I get a memory management error. I know that my CPU is 64-bit capable as well as my video card. As for everything else I am not sure...
Installation & Setup
problems with Windows 7 upgrade from Vista Ultimate
Hi people, I'm having trouble upgrading my dell xps m1330 from Ultimate vista to 7 pro. I realize that I probably purchased the wrong version but it won't even allow me to do clean install. It goes into 'copying temporary files" forever, then finally to install option screen of either upgrading...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App