Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: One short beep, one long beep

16 Feb 2013   #1
Rain08

Windows 7 Professional 64-bit (6.1, Build 7601)
 
 
One short beep, one long beep

I was just using my PC yesterday, everything is normal, It was hot around 32 °C I think. Around 3:00 P.M. my PC suffered 2 BSODS, I can't upload the .dmp files because I can't open it. I thought its just overheating so I turned it off and after a few minutes the second BSOD appeared, I restarted my PC and the one short beep and one long beep is sounding. I checked my RAM and tried to switch it to another bank but the beeping is still there. My video card temp was 50-52 °C before the first BSOD happened. What can I do to fix this?
Specs:
HP Pavilion P6640D (1 year, 9 months)
Pentium® Dual Core CPU E6700 @ 3.20 GHz (1 year, 9 months)
Foxconn 2A8C (1 year, 9 months)
2048 MB RAM Samsung 2rx8 PC3 10600u (1 year, 9 months)
Palit NVIDIA GeForce GT 610 2048 MB (1 month, 2 weeks)
Seagate Barracuda ST3320418AS 320 GB @ 7200 RPM (1 year, 9 months)
Western Digital 32000BEV External HDD 298.09 GB (1 year, 9 months)
Bestec ATX-250-12Z 250 Watts (1 year, 9 months)


My System SpecsSystem Spec
.
17 Feb 2013   #2
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Is it possible you are hearing 1 long - one short?
That might indicate a BIOS CHECKSUM error, depending on the brand of BIOS.

You can try a ClearCMOS procedure (CLRTC is the same thing):
  • Note all your current BIOS settings
  • Shut down the computer > remove the power cord.
  • Remove the 3v motherboard battery.
  • Move the CLRTC jumper from pins 1-2 to 2-3.
  • Touch a metal part of the case and Press and Hold the reset button for approx. 30 seconds to discharge all power from the board.
  • Put the CLRTC jumper back on pins 1-2.
  • Replace the 3v battery > replace the power cord > boot.
  • Immediately go back into BIOS and reset all your preferred settings. If the CLRTC worked you will need to reset the date and time.
My System SpecsSystem Spec
17 Feb 2013   #3
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Well, it`s always a process of elimination, but if it was working fine, I`d start with the video card, then the memory. If you have nothing to swap, then you have to get the dump file uploaded so it can be analyzed. It could be something as simple as your video driver, download and reinstall.

32 Celicius is not hot at all, 89.6 F

Clearing the cmos could also be a good starting point. If you`re not sure how, just ask.
My System SpecsSystem Spec
.

17 Feb 2013   #4
Rain08

Windows 7 Professional 64-bit (6.1, Build 7601)
 
 

Well I tried to move the ram to another bank but the problem is still there, tried switching from video card to chipset but problem is still there.
My System SpecsSystem Spec
17 Feb 2013   #5
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I can't find a Foxconn 2A8C listed on the Foxconn site.See post #2, anything?
My System SpecsSystem Spec
17 Feb 2013   #6
Bumpkin

Windows 7 Home Premium 64bit
 
 

First I would check the HP support for the beep codes.

Try another PSU, I'm surprised your 250 watt PSU works at all with that video card!
My System SpecsSystem Spec
17 Feb 2013   #7
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

True, the minimum PSU for the GT610 is 300W.
My System SpecsSystem Spec
17 Feb 2013   #8
bobkn

Windows 7 Pro X64 SP1
 
 

That code is supposed to be for a memory problem:

BIOS Beep Codes HP TouchSmart 600-1290a Desktop PC | HP® Support

Whether it's really as simple as RAM gone bad, or whether it could be due to a motherboard or memory controller (part of the CPU), I don't know.

If you can swap in some known good RAM, that might solve it for you.
My System SpecsSystem Spec
17 Feb 2013   #9
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Try this,

RAM (memory):
This will require memtest on a bootable CD or USB stick.
RAM - Test with Memtest86+
If the machine won't boot, download Memtest from another machine and burn a CD. You don't need w7 for it to run.
My System SpecsSystem Spec
18 Feb 2013   #10
Rain08

Windows 7 Professional 64-bit (6.1, Build 7601)
 
 

@AddRAM: How do I remove the CMOS battery?
@Bobkn: I have another RAM from an old laptop but its half the size, If it works, how can I remove the RAM from a laptop?, It's an HP laptop.
@Britton30: I can't even turn on my PC to run Memtest86+ since the monitor says "No signal", I'm already using my PC with that card for more than a month.
@Bumpkin: I'm already using my PC with that card for more than a month.
My System SpecsSystem Spec
Reply

 One short beep, one long beep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Long LOUD never ending beep on start up, no display, help?
So i've had no problem with my computer until random BDODS Freezes, screen glitches and last but not least Windows not booting. So i decided after a couple days to take out my Video card (Nvidia) and clean it and all of that and as i was taking it out it got jammed but eventually i got it out by...
General Discussion
one beep long followed two beep short
Is my video card has this code? A while ago it takes time i open my notebook i'm worried this is second time it happened.
General Discussion
Computer Outputs a "beep beep" sound 1/3 times wallpaper changes. WHY?
As the title says my PC outputs a "beep beep" sound out external speakers. It is extremely annoying. I haven't the slightest clue why it does this. Its kindof i higher pitch beep beep. all my specs are on my profile.
General Discussion
One long beep then two short, no display shown
Guys, I have a Sony VGN-FZ21E the laptop shows no display when turned on and give one long beep and then two short beeps. I've tried connecting a external display but this also shows no picture. I've changed the RAM and the HHD but the beep still continue, with no display showing. How do...
BSOD Help and Support
Random BSOD with beep code 1 long 3 short
Hi, I keep experiencing random crashes. Due to the fact that it happens at any time I can only provide the information attached in the zip. I still hope some kind and knowledgeable soul will be able to help me out. :) 32 bit clean 3 year old install full retail 3 year old system
BSOD Help and Support
Beep, Beep wont stop
Hi, I have a acer travelmate 4070 laptop when you turn it on it starts beeping loud, I started clicking enter so it can boot quick lol as soon laptop booted, opened window went to normal screen operation it stopped beeping. I gave it a shut down, turned it on again and that loud beeping started...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App