Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Your computer was unable to start, Startup Repair.

05 Mar 2013   #21
gregrocker

 

I suggested you wipe the HD of possibly problematic code and then follow the steps to get a perfect Clean Reinstall. Have you done that yet?

Pay special attention to how drivers are handled in Win7 since you have a problem with a driver which Win7 may not want.


My System SpecsSystem Spec
.
06 Mar 2013   #22
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
I suggested you wipe the HD of possibly problematic code and then follow the steps to get a perfect Clean Reinstall. Have you done that yet?

Pay special attention to how drivers are handled in Win7 since you have a problem with a driver which Win7 may not want.

I formatted my harddisk when im doing a clean install for my Window 7 OEM version.. Im stilling having this problem. I have no idea which driver was give a problem, after the start-up repair, everything was normal.
My System SpecsSystem Spec
06 Mar 2013   #23
gregrocker

 

Formatting does nothing to get rid of possibly interfering boot code.
My System SpecsSystem Spec
.

06 Mar 2013   #24
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Below i attach the blue screen error video here again for everything to see.

Blue screen on window 7 - YouTube

The blue screen was blinking so fast, lucky i manage to video it down and i will list down the log below.


A problem has been dectected and windows has been shut down to prevent damage to your computer.

SYSTEM_SERVICE_EXPEPTION

If this is the first time you've seen this stop error screen, restart your computer. If this screen appers again, follow these step:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows update you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical infomation:

***STOP:0x0000003B (0x00000000C0000005, 0xFFFFF8800516E489, 0xFFFFF88005E7B6D0, x0000000000000000)

*** nvlddmkm.sys - Address FFFFF8800516E489 base at FFFFF22004 84 9000, Datastam? 50f94c87


Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk: 65

After this screen, it will auto restart...
My System SpecsSystem Spec
06 Mar 2013   #25
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
I suggested you wipe the HD of possibly problematic code and then follow the steps to get a perfect Clean Reinstall. Have you done that yet?

Pay special attention to how drivers are handled in Win7 since you have a problem with a driver which Win7 may not want.

As what you mention, format does not solve, how can i wipe the HD possibly problematic code?
My System SpecsSystem Spec
06 Mar 2013   #26
gregrocker

 

Try updating your Nvidia display or chipset drivers, if necessary in Safe Mode.

If you recently updated one of those Nvidia drivers, try rolling it back in Device Manager, or if required boot into the Win7 DVD System Recovery Options to System Restore to before it was changed.

As to doing the reinstall after wiping the HD, the blue links in earlier posts explain how each is done. Apparently you didn't click on them to try to understand them better.

This lack of attention to detail if applied to the reinstall you did likely left you with a mess which is why I suggested you start over, wipe the HD with Diskpart Clean Command to get a perfect Clean Reinstall - Factory OEM Windows 7
My System SpecsSystem Spec
06 Mar 2013   #27
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Try updating your Nvidia display or chipset drivers, if necessary in Safe Mode.

If you recently updated one of those Nvidia drivers, try rolling it back in Device Manager, or if required boot into the Win7 DVD System Recovery Options to System Restore to before it was changed.

As to doing the reinstall after wiping the HD, the blue links in earlier posts explain how each is done. Apparently you didn't click on them to try to understand them better.

This lack of attention to detail if applied to the reinstall you did likely left you with a mess which is why I suggested you start over, wipe the HD with Diskpart Clean Command to get a perfect Clean Reinstall - Factory OEM Windows 7

I have updated my Nvidia display recently so i have to rollback to the previous driver and update them in safe mode?
So you recommand me to do this first before wiping the HD?


You got me wrong and im sorry for causing some misunderstanding.


8. Unplug all other HD's and peripherals except ethernet, Boot the Windows 7 installer, choose Custom Install, then Drive Options (Advanced) to Delete all partitions not needed, repartition as desired following illustrated steps given here: Clean Install Windows 7.

I have no idea how can i do this? I just plug in my ethernet wire? or my display and ethernet wire? my keyboard? Im on a DIY computer..
My System SpecsSystem Spec
06 Mar 2013   #28
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

This lack of attention to detail if applied to the reinstall you did likely left you with a mess which is why I suggested you start over, wipe the HD with Diskpart Clean Command to get a perfect Clean Reinstall - Factory OEM Windows 7[/QUOTE]

Yes this is what i need. So i should roll back my driver first and install my new driver via safe mode and wipe the HD with Diskpart clean command?
My System SpecsSystem Spec
06 Mar 2013   #29
gregrocker

 

There is no need to roll back or install any driver if you're about to wipe everything out with Clean command, then Reinstall. Folllow the steps carefully. Ask back any questions you have.
My System SpecsSystem Spec
06 Mar 2013   #30
Slong

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
There is no need to roll back or install any driver if you're about to wipe everything out with Clean command, then Reinstall. Folllow the steps carefully. Ask back any questions you have.
Alright, i will update here once again if i have any problems.

Thanks for your help.
My System SpecsSystem Spec
Reply

 Your computer was unable to start, Startup Repair.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows unable to start - Startup Repair and System Restore won't work
Hello. I've had problem with my friend's laptop (OS - Windows 7 Ultimate). It won't log on to it's fullscreen mode. When I open it, I'm always stuck at Startup Repair error cycle. Here's what happened: I installed Glary Utilities and used it to uninstall the Adobe CS3 Bundle. Then I installed...
Backup and Restore
Win7 unable to start-Startup repair fails-Problem signature 07 BadDisk
Hello All, Hope you are doing well. Before I go one to explain my predicament, my system specs are given below. 1. Samsung Ultrabook Series 5 - Model NP530U3C-A01UK 2. Processsor - Intel Core 5-3317U CPU @1.70 Ghz 3. Windows 7 Hope Premium - 64 Bit OS 4. No Optical Drive From last few...
BSOD Help and Support
Computer unable to start up startup repair does not help
OK, so me and a friend found a flash drive at his house, being curious to see what was in it we plugged it into my laptop and started it up, it got to the loading windows screen and sat there for like 20 minutes, I held down the power button to turn it off , then when I turned it on again it...
General Discussion
Laptop is Unable To Start, Startup Repair
I have an asus u45jc laptop. I have had this problem so much. Basically when i start my computer, it would work. Then i shut it down. The next time i start my computer it would not work and then i need to shut it off and then turn it back on. Then i have to do the startup repair where your...
General Discussion
Unable to start up after virus problem; Startup Repair keeps going
Short version: I'm having problems starting up after a virus problem. I booted up into Startup Repair, and it's been "Attempting Repairs" for a couple hours now. What next? I'm running Windows 7 Professional 64-bit on a MacPro through Bootcamp. Backstory: I had been having problems with a...
System Security
Unable to start- startup repair problem
The system starts with Startup repair. There is no other option and the repair is also not completing successfully. advanced startup options like system restore and memory diagnostic are also not working. it says that system has no restore points. the system is also not booting the windows Cd so...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App