Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Not Booting

03 Apr 2013   #11
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

BTW can you boot succesfully to "safe mode"? Or EXACT same problem... it enters recovery mode immediately. No visible signs that it tries to boot to safe mode at all?
Advanced Boot Options


My System SpecsSystem Spec
.
03 Apr 2013   #12
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by MamuMogambo View Post
I am summarizing all the things again:
1. I asked PW to extend my D: drive and take the free space from C:
2. PW said that the task will be completed after a reboot because C: is being used right now.
3. I rebooted. PW started doing the extension in a low resolution windows (I don't remember exactly if it was after the formation of the Windows 7 logo or after)
4. Windows started normally after the job was completed successfully.
5. Windows were opening in Windows Classic theme so I rebooted.
6. This time instead of booting in Windows, Windows Startup Repair started.
7. It was unable to diagnose the problem.
I know.
answer #9
My System SpecsSystem Spec
03 Apr 2013   #13
MamuMogambo

Windows 7 Home Basics x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by MamuMogambo View Post
I did the Startup Repair again but the Startup repair is unable to recognize the problem. I am getting all error codes as 0x0 and finally the statement "Startup Repair has tried several times but still cannot determine the cause of the problem."
After startup repair you see recovery options like system restore, command prompt? If so select "command prompt" then

Code:
diskpart
list vol
exit
What volumes do you see (don't list the dvd drives)?
Give the size of each volumes as well. Are these all volumes you normally see in windows explorer? Look at the sizes and labels. Drive letters can be different as in running win7.
I see:
Disk 0 Online 465 GB 0 B

Oh, now I am screwed I think
My System SpecsSystem Spec
.

03 Apr 2013   #14
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by MamuMogambo View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by MamuMogambo View Post
I did the Startup Repair again but the Startup repair is unable to recognize the problem. I am getting all error codes as 0x0 and finally the statement "Startup Repair has tried several times but still cannot determine the cause of the problem."
After startup repair you see recovery options like system restore, command prompt? If so select "command prompt" then

Code:
diskpart
list vol
exit
What volumes do you see (don't list the dvd drives)?
Give the size of each volumes as well. Are these all volumes you normally see in windows explorer? Look at the sizes and labels. Drive letters can be different as in running win7.
I see:
Disk 0 Online 465 GB 0 B

Oh, now I am screwed I think
I asked you to list the volumes! No volumes at all?

Code:
diskpart
select disk 0
list part
exit
Tell me the partitions and the size.
My System SpecsSystem Spec
03 Apr 2013   #15
MamuMogambo

Windows 7 Home Basics x64
 
 

After running LIST PARTITION:
Partition 1 Primary 100MB 1024KB
Partition 2 Primary 71GB 101MB
Partition 0 Extended 394GB 71GB
Partition 3 Logical 383GB 71GB
Partition 4 Logical 10GB 455GB
I assume PW didn't complete the task successfully.
My System SpecsSystem Spec
03 Apr 2013   #16
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Code:
diskpart
select disk 0
select part 1
detail part (is it ACTIVE)? what drive letter?
select part 2
detail part (what drive letter? this is win7 partition?)
exit
Did you shrink partition 2 and extend partition 3?
My System SpecsSystem Spec
03 Apr 2013   #17
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Give drive letters for part 3 and 4 as well. All partitions are healthy? All are NTFS? (skip partition 0, it's a container partition that holds the logical partitions)
My System SpecsSystem Spec
03 Apr 2013   #18
MamuMogambo

Windows 7 Home Basics x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
diskpart
select disk 0
select part 1
detail part (is it ACTIVE)? what drive letter?
select part 2
detail part (what drive letter? this is win7 partition?)
exit
Did you shrink partition 2 and extend partition 3?
[Part 1 - Not Active
Drive Letter F]
[Part 2 - Active
Drive Letter C]
Yes, I shrunk Partition 2 and extended Partition 3
My System SpecsSystem Spec
03 Apr 2013   #19
MamuMogambo

Windows 7 Home Basics x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Give drive letters for part 3 and 4 as well. All partitions are healthy? All are NTFS? (skip partition 0, it's a container partition that holds the logical partitions)
[Part 3 Drive Letter D]
[Part 4 Drive Letter E]
Yes, all partitions are healthy and are NTFS
My System SpecsSystem Spec
03 Apr 2013   #20
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

So Partition 2 Primary 71GB 101MB is ACTIVE?? Very sure?
Why do you have a 100MB partition that is normally used for bootmanager and bootmenu? It isn't used at all, because the 71GB partition is active. Not a problem btw.
My System SpecsSystem Spec
Reply

 Windows Not Booting




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Issue booting Win 7, booting directly into XP & no boot manager
Hi, I just got a ASUS G75V series and updated it to windows 7 professional with Intel core i7. I was able to work with it and everything was fine until I had to install XP because some softwares are not compatible with Win 7 x64. I have Win 7 on drive C: and windows xp on drive E: which in...
Installation & Setup
Booting Windows 7 ISO off USB
I'm using YUMI attempting to create a Multi-ISO USB(Actually an SSD) Drive working fine, Ubuntu 12.04 and Ultimate boot CD are working but I was wondering Is there a way to boot the Windows 7 ISO directly? as in pointing the bootloader to the ISO file and booting it?
Installation & Setup
BSOD when dual booting Windows Vista 32bit and Windows 7 64bit
Hello, I have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in...
BSOD Help and Support
windows 7 not booting
I am using win 7 X64 premium version , and i tried to install win XP for a dual boot option , but the win XP got crashed and not getting booted , so i tried to boot from Win 7 using WIN 7 REPAIR DISC ( Start up repair) it says no problem is detected and when i restart Win XP gets booted and BSOD...
BSOD Help and Support
Windows 7 not booting
I seem to have a curious problem with Windows 7. I'm running it on a machine with the following spec: Intel Pentium 4 2.93GHz 2Gb RAM 80b Primary SATA HDD & 500Gb Secondary SATA HDD NVIDIA GeForce 7600 GT I can install Windows 7 without problems - however after updating Windows 7...
BSOD Help and Support
Windows 7 not booting up!
I have Compaq Presario CQ61. Basically go to Youtube and play games I install with my CD!! I don't download anything. Now the problem I'm having is my laptop won't boot and all I see is the Caps Lock and Num Lock lights blinking and just a black screen. I just bought this laptop recently...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App