New
#71
Alright. I'll let you know how everything turns out.
Alright. I'll let you know how everything turns out.
If you want one partition
On the HP Splash screen press F9 and choose the device optical drive or USB device . Press enter when you see the screen that says Press any key to boot from cd or DVD…( image below )
When you get to this screen ( image below )
Press Shift and F10 . You will get a command prompt window . It should open up to X:\Sources . In there input these commands and press enter after each line .
DISKPART
LIST DISK
SELECT DISK 0
CLEAN
CREATE PRIMARY PARTITION
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS LABEL="Windows" QUICK
ASSIGN LETTER=C
EXIT
EXIT
Back on the image above press Install Now . Check the I accept the license terms box and click on Next. Click on the Custom (advanced) option. Then choose
Disk 0 Partition 1: Window (C:\) and click Next
Windows installed properly. Looks like everything's good so far. I'll help my wife with drivers and everything tomorrow.
Thanks again for the help!