Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer won't start. Tried multiple solutions.

27 Apr 2013   #1
majabuu360

windows 7
 
 
Computer won't start. Tried multiple solutions.

(I'm between average and novice when it comes to computers so I may not understand you at first)
Hi Ive' looked through the forums and I'm stuck. I'll first give the specs of my computer.
Aspire 532418
-Windows 7 32bit(i assume) -320 gb hdd
-intel b815 -dvd super multi dl drive
-intel hd graphics -acer nplify 802.11b/g/n
-4 gb ddr3 memory - 6 cell li-ion battery

Ok oringinally I was on my computer and I loaded to many file or screens at once so it froze. I turned off the computer by holding onto the on button to turn it off the reset. So when I turned on the computer it went to the startup repair progam. It ran but never finished so i turned it off in an attempt that the option to skip the startup repair would come up it didnt. So I left it on all night long, in attempts that it would fix itself, and went to work. When I came back in the morning it was still running the startup repair.
So I turned it off one more time and canceled once I got into the startup reapair screen again. Then I went through the other recovery options:
System Restore
System image recovery
Command prompt
Reinstall Windows
Windows memory dianostic tool
None of these worked
The last one I did memory dianostic tool put me to the picture with the black screen and the system32/winload with the status: 0xc000000f
(I havent been able to get back to the startup reapair since.)
Now wen I hit enter it puts e to this screen

Windows Valley

Sorry pictures arent in order
so I try advance option which pts me back to the first screen.
SO then I tried the windows repair cd 32 bit and 64bit which wouldnt work I changed around the boot sytem to run cd, dvd, and usb the cd still didnt work. So then I went with Window defenfer offline or system sweeper then I got this error code 0x8004cc01. So Usb worked but I dont think the cd drive is. I just want to use my computer please help

Computer won't start. Tried multiple solutions.-65a1558c-4130-45c3-93b4-e1de3c40739d_0.jpg

Computer won't start. Tried multiple solutions.-img_20130427_121411.jpg

Computer won't start. Tried multiple solutions.-img_20130427_121730.jpg

Computer won't start. Tried multiple solutions.-img_20130427_121528.jpg

Computer won't start. Tried multiple solutions.-img_20130427_121725.jpg




My System SpecsSystem Spec
.
27 Apr 2013   #2
Jacee
Microsoft MVP

Windows 7 Ultimate 32bit SP1
 
 

This topic was posted as 'solved' ...Boot Manager Status 0xc000000f, boot selection failed.
My System SpecsSystem Spec
27 Apr 2013   #3
gregrocker

 

In addition here is everything that can be done to for Troubleshooting Windows 7 Failure to Start
leading up to rescuiing your files to get the superior Clean Reinstall - Factory OEM Windows 7.

If you stick with the steps in the reinstall tutorial you'll get and keep a perfect install, the exact opposite of what you have with factory-preinstalled Win7 and better than 90% of other users have.
My System SpecsSystem Spec
.

29 Apr 2013   #4
majabuu360

windows 7
 
 

@ Jacee im trying the method on the page so far it seems like it making some progress to early to tell. @ gregrocker I'll try that next I dont care about the files I just want access to my computer o Ill try that next without backing up my files
My System SpecsSystem Spec
29 Apr 2013   #5
majabuu360

windows 7
 
 

"so im stuck the multi or the yummi I both installed. Now that may be my first problem i used them to install window installer onto the usb. Was there something else I was suppose to install? I have the same computer issue with not being able to load my computer. So I have yummi on the usb and connect it to the damaged computer. And go thorugh the option of windows installer. Which takes me to the startup reapir area. in one of these pictures i can get to the system restore area but nothing works. And then get asked for a dvd or final dvd. I just want to use my computer i dont care about the files please help"
thats wat i put in the links in the solved boot problem n im stuck now
My System SpecsSystem Spec
29 Apr 2013   #6
gregrocker

 

The installer is provided in both of the blue-link tutorials along with the tool to write it to flash stick. Please follow the steps of whichever approach you wish to take now:

Quote   Quote: Originally Posted by gregrocker View Post
In addition here is everything that can be done to for Troubleshooting Windows 7 Failure to Start
leading up to rescuiing your files to get the superior Clean Reinstall - Factory OEM Windows 7.

If you stick with the steps in the reinstall tutorial you'll get and keep a perfect install, the exact opposite of what you have with factory-preinstalled Win7 and better than 90% of other users have.
My System SpecsSystem Spec
29 Apr 2013   #7
majabuu360

windows 7
 
 

I got through most of the installation then i got this error also in the boot screen there is now three window that i can f8


Attached Thumbnails
Computer won't start. Tried multiple solutions.-img_20130429_193103.jpg  
My System SpecsSystem Spec
29 Apr 2013   #8
gregrocker

 

Back up your files, unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS, enable Legacy BIOS or Compatibility Support Module, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into Win7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes certain install failures.
My System SpecsSystem Spec
Reply

 Computer won't start. Tried multiple solutions.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Update Error Message: 8024402c - Tried multiple solutions
Dear Windows Seven Forums, I try to resolve my own issues and normally do. However, this error message has gotten the better of me so far. Have tried various solutions posted about this error message, from registry to firewall. None work so far. I have enclosed the notepad containing the...
Windows Updates & Activation
Windows Updates error 80004002, tried multiple solutions
Hello members, This is my first post on SevenForums. I'm posting here because I found a similar thread but with a rather harsh solution, doing a repair install. Before I'm doomed to do the same I was hoping someone would like to take a look at my problem, solutions I tried and attached logs....
Windows Updates & Activation
Computer cannot start up - Start up repair
Hello, i downloaded Comodo CIS yesterday (after uninstalling Avira) with no problems, but this morning my Acer One d270 was unable to start giving a black screen, and i clicked enter on the option to use ''Start up repair'', which only seemed to show the following ; ''Unspecified change to...
General Discussion
Computer doesn't start cant get into bios or advanced start up setting
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything. when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu,...
General Discussion
Any solutions for starting my computer?
When turning on my computer, nothing appears on the screen & there is no sound (other than the sound of the fan running). There are 3 keys on the keyboard that are lit up, which are: The power button F12, which also has the WiFi symbol (stays orange instead of turning white) The caps lock...
General Discussion
SP1 Out of Solutions
Im going back and forth pounding my head against a metal spike trying to figure out just why I cant install this, almost for the past week now. I get error code 80004005. I tried the following solutions Fix It (No availe) Scan And Error Repair (Did Nothing) Checked my computer upside down for...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App