Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Pop-up window on exit

12 May 2013   #1
taraskyn

Windows 7 Ultimate x64
 
 
Pop-up window on exit

Hi all!
I am new to the forum, just registered and I have a very weird question.

Do you know how sometimes after you installed a new software program, - you open it, work with it whatever and then on exit there is a pop-up window asking you to exit or to minimize or it may ask you something else.
Not all programs do that. Anyway on that pop-up window there is usually a box - you can put tick in it if you don't want to see that pop-up window ever again and in my case I did that.
Now who can tell me how to get this pop-up window back on exit?
I tried re-installing the program and it did not help. In fact the re-installed program somehow remembered all my settings from previous setup.
Anyone can help me with that please?

Just want to add.
The program is called Synkron. On exit it asks you to exit or to minimize. If you choose exit it will always exit completely, if you choose minimize - it will go to taskbar when you hit a cross and that's what I desperately need but I chosen exit by mistake and now I never get to see the pop-up window again. There is nothing in the options to change that. Re-installation will not help.
I know there the way to change that. Hope someone knows the answer.

Thanks!!!


My System SpecsSystem Spec
.
12 May 2013   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Welcome to Seven Forums

Is there a check box in that window ? Asking you to remember your selection ?
My System SpecsSystem Spec
12 May 2013   #3
taraskyn

Windows 7 Ultimate x64
 
 

Yes, there is a check box to remember the selection.
But my selection was wrong. And to change it the only way is to bring the pop-up window back.
I has to be somewhere within the program.
My System SpecsSystem Spec
.

12 May 2013   #4
taraskyn

Windows 7 Ultimate x64
 
 

The thing is even if I re-install the program it does not help as all my settings come back.
I am using Revo-uninstaller to unistall the program and delete all the traces. Still no luck.
I will try to install to a different location. Maybe this will help.
My System SpecsSystem Spec
12 May 2013   #5
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Also use Ccleaner to clean the registry of all traces.

CCleaner - PC Optimization and Cleaning - Free Download
My System SpecsSystem Spec
12 May 2013   #6
taraskyn

Windows 7 Ultimate x64
 
 

Yes, I used ccleaner as well.
I will try it tomorrow on my other OS windows 8. It is clean and I will test it all carefully with ccleaner and revo.


By the way, installing to different folder does not help but installing to different disk works. But other disk still not good enough for me. I just want to get it right. It is there, it's just been locked indefinitely by my selection.
There's got to be a way to unlock the message.

I will come back tomorrow with my results.

My System SpecsSystem Spec
13 May 2013   #7
taraskyn

Windows 7 Ultimate x64
 
 

Ok, my results are successful.
Revo plus ccleaner and most important deep search in hidden folders for any traces, delete any hidden configuration files and all as new.
My System SpecsSystem Spec
13 May 2013   #8
Sub Styler

Windows 7 Ultimate x64
 
 

ok, usually software has an option to "reset warnings" in the preferences, such an option may have worked. Glad you got sorted!
My System SpecsSystem Spec
Reply

 Pop-up window on exit




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Run Exit/Quit?
I know that doing a 'run pathname\programxyz.exe' will start a program. I would like to know what the command would be to exit/quit the program. Could it be something as simple as the same 'run' command with a '-quit' switch suffix? thnx
General Discussion
Magnifier Exit Shortcut
Anyone know of a keyboard shortcut to exit the Magnifier? I've Googled and all I find is Win + + to open/zoom in and Win + - to zoom out. It's a pain to have to go down to the Taskbar to close the Magnifier. Surely there must be a keyboard shortcut for this...
General Discussion
exit a video
How do I exit a video when I have made it full screen?
Music, Pictures & Video
Exit works VERY slowly
When I exit WLM 2011, the program stays on the screen, and the desktop icons appear one at a time again very slowly. I usually clear the screen and get back to the desktop with a Winkey-d or "show desktop" icon. But I shouldn't have to do that to clear WLM from the screen. This happens only in WLM....
Browsers & Mail
Cannot exit homegroup
I am having a problem leaving the homegroup. I do not have the option to leave the group, nor do i have the option of removing the password. What do i do?
Network & Sharing
Cannot exit sleep mode
First the system specs: Intel DX48BT2 motherboard Intel QX9770 3.2 GHz Core 2 Extreme Nvidia GTX 295 8GB of OCZ 1333MHz DDR3 Gold Series RAM 30GB OCZ Vertex SSD 1TB Samsung HD103UJ HDD Windows 7 SP1 Public Beta For two nights in a row whenever I have put my computer to sleep before I go...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App