Resuming From Hibernation takes 7 Minutes


  1. Posts : 17
    Windows 7 Ultimate x64
       #1

    Resuming From Hibernation takes 7 Minutes


    my Windows 7 installation takes 7 minutes to resume from hibernation, it goes to hibernation much faster (in under 1 minute). Windows 7 is installed on an IDE drive attached to a PCI IDE controller. I have ran Hibernation Trace but i am unable to find what is causing the delay can anyone look at it and help me out.




    The Trace files can be downloaded here https://mega.co.nz/#!0o032ThK!CBpbj1...b8leLqVbL8A1Eg
      My Computer


  2. Posts : 78
    Windows 7 Ultimate x86
       #2

    hibernation saves everything going on before hibernation to hard drive, so if there are a lot to be saved maybe this causes more time to load them all when going out of hibernation. have you tried hibernating just after entering windows ? it should be faster.
      My Computer


  3. Posts : 17
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Yes, i have tried that, takes the same amount of time i.e 7 minutes.
      My Computer

  4.    #4

    Have you asked the Trace author Cluberti to have a look? You can contact him at Windows 7 Help Forums - View Profile: cluberti
    or in the Trace thread: Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace - Windows 7 Forums

    Otherwise go through all of the steps for Sleep Mode Problems - Vista Forums,
    update or reinstall the Display driver,
    disable, reboot, and then re-enable Hibernation: Hibernate - Enable or Disable - Windows 7 Forums
      My Computer


  5. Posts : 17
    Windows 7 Ultimate x64
    Thread Starter
       #5

    Thanks...i will contact him
    I did update the display drivers but did not disable-re-enable hibernation
      My Computer

  6.    #6

    Unhide the System Files in Folder Options and make sure C:\Hiberfil goes away after disabling it and rebooting. Then re-enable so it creates a new one. This can help.

    Hidden Files and Folders - Show or Hide
      My Computer


  7. Posts : 17
    Windows 7 Ultimate x64
    Thread Starter
       #7

    I tried disabling and enabling hibernation, still takes 7 minutes.
      My Computer


  8. Posts : 2,528
    Windows 10 Pro x64
       #8

    It looks like the disk is pegged at 100%, but no files are being accessed during this time. There's a thread in an svchost for the task scheduler that appears to start at around this time (as well as msfeedsync), but I don't know if those are causing the issue, or if they're just blocked and are victims of something else. I also see the Shell Hardware Mixed Content Handler being launched at exactly the same time as these other threads in the task scheduler (C:\Windows\System32\rundll32.exe shell32.dll;SHCreateLocalServerRunDll {995C996E-D918-4a8c-A302-45719A6F4EA7} -Embedding), but that finishes very quickly (whereas the two threads doing task scheduler work take almost 438 seconds to complete). Once those complete, the call to the dllhost that checks for COM component status (30D49246-D217-465F-B00B-AC9DDD652EB7) is then executed, which indicates the system has moved along. I would wager there's something wrong with this task scheduler item (being run by system) which is trying to query for RSS data, but further logging there needs to be enabled to figure it out in event viewer.

    To do so, open event viewer, then click View > Show Analytic and Debug Logs to show additional logging options. Scroll down to Applications and Services Logs > Microsoft > Windows > Task Scheduler, and inside you will see 3 logs. Operational is already enabled, but Debug and Diagnostic are not. Please right-click on both of these two additional logs (Operational and Debug) and enable them by selecting "Enable Log" from the right-click menu for each.

    Once you've done this, you can start a new xbootmgr trace to trace hibernate/resume, and then when that completes you can zip up the trace, then export these three logs under Task Scheduler here to your desktop, zip them up as well, and upload all to your file share and link for further analysis.
      My Computer


  9. Posts : 17
    Windows 7 Ultimate x64
    Thread Starter
       #9

    Thanks a lot for helping me out, here are the event viewer logs and the trace files

    Event Viewer Log
    https://mega.co.nz/#!5t1izK6K!J0EmFz...NLecsKzoZKz0_o
    Trace

    https://mega.co.nz/#!49dhQZIR!SNj5rE...y-ogqOV0sMumJA
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:30.
Find Us