Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BOOTMGR is Missing, and WinRE doesn't fix it.

10 Jun 2013   #1

Windows 7 Ultimate x64
 
 
BOOTMGR is Missing, and WinRE doesn't fix it.

Hi, I am faced with a very serious problem and I'm starting to get really desperate.

I have an SSD with Windows 7 and Xubuntu dual boot with GRUB boot menu,
and two internal laptop hdds that I use for data, such as music, photos, software projects etc...

I recently changed some of the drive letters for the two internal laptop hdds, but NOT my SSD ( C: drive )
but now I get the "BOOTMGR is missing. Press Ctrl+Alt+Del to restart" message.

First thing I did was insert my recovery disk ( same as my installation disk for win 7 ) and attempted to rebuild my bcd.
And so I did the usual good stuff:
Code:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
I also had to rename/delete my old BCD store in order to recreate it.
I made sure that the relevant partitions are active, ran the commands, but still the problem persists.

I also noticed that my Drive letters changed. A partition on one of the laptop HDDS, which as E:\, became C:\ and my C:\ drive became E:\
So i unlugged all my hdds except for my SSD where my windows is installed, and repeated the whole process.
But no luck ...

I've been at this for hours, but yet nothing.
Even my Recovery disc is going bananas now. When I select the Windows OS and attempt to recover its says the Windows Recovery is not compatible with this installation.

I've also looked around in my C:\ drive to look for the BOOTMGR file. But its nowhere. Probably because its beyond hidden. I tried this:
Code:
dir /a
in C:\, C:\windows, C:\windows\boot etc..

Any help would be tremendously appreciated !!
Thanks

My System SpecsSystem Spec
.

10 Jun 2013   #2

Windows 7 Ultimate x64
 
 

Never mind.
Yet again, a dead serious problem turned out to be something completely stupid.

For some reason, even with the other HDDs unplugged, the Windows Recovery attempted to recreate the bootmgr file on a different drive.
I simply copied it from one of the other drives using the Command Prompt from the recovery disc to my Windows 7 installation drive.

Now I just have to figure out how to change the Windows Vista loading screen back to Windows 7 >.>
My System SpecsSystem Spec
10 Jun 2013   #3
Microsoft MVP

 

If you'd like for us to look over your disk configuration to make sure its correct post back a screenshot of Disk Management - Post a Screen Capture Image .'

You want to be sure the correct partition is marked Active then run a few Startup Repairs from the disk to complete repairs to the boot loader.
My System SpecsSystem Spec
.


12 Jun 2013   #4

Windows 7 Ultimate x64
 
 

That was actually the first thing I did after my PC finally booted into windows.
Though I'd greatly appreciate if someone looked over my current disk config.
My current knowledge on partitions is still only limited to their use, and not on the technicalities.

I have attached a screen shot.
Thanks


Attached Thumbnails
BOOTMGR is Missing, and WinRE doesn't fix it.-disks.png  
My System SpecsSystem Spec
12 Jun 2013   #5
Microsoft MVP

 

Please include the drive map.

Why are any partitions besides System marked Active? They should not be. Partition - Mark as Inactive - Windows 7 Forums
My System SpecsSystem Spec
12 Jun 2013   #6

Windows 7 Ultimate x64
 
 

Oh I thought all partitions in use should be active. So only my Windows partition should be active ?
Is this the correct configuration ?


Attached Thumbnails
BOOTMGR is Missing, and WinRE doesn't fix it.-disk2.png  
My System SpecsSystem Spec
12 Jun 2013   #7
Microsoft MVP

 

When the OS HD is not in Disk0 slot it risks having the System boot files moved to a preceding partition - especially if it is marked Active - during Repairs or Reinstall.

What are the two partitions preceding C for? If you do not want them I'd delete and recover the space using Partition Wizard boot CD to Resize Partition - Video Help. Have the disk or repair CD standing by as sometimes a few Startup Repairs must be run when resizing on the boot sector, and only use the PW Boot CD which is safest.
My System SpecsSystem Spec
Reply

 BOOTMGR is Missing, and WinRE doesn't fix it.




Thread Tools



Similar help and support threads for2: BOOTMGR is Missing, and WinRE doesn't fix it.
Thread Forum
Bootmgr.exe missing... mpio.sys missing or corrupted. Unable to boot General Discussion
Solved BOOTMGR Missing! Rstoring windows Doesn't help Hardware & Devices
BOOTMGR missing! Installation & Setup
Error "BOOTMGR is missing"_It doesn't allow me to use recovery disk Installation & Setup
Bootmgr is missing,startup repair doesn't work General Discussion
bootmgr missing error, became bootmgr MISSING. General Discussion
Bootmgr missing General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:50 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33