Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: computer would not go to sleep fully

10 Jun 2013   #1
red123

 
 
computer would not go to sleep fully

Once in awhile when I put my computer to sleep, my monitor will shut off, but the remainder of my components (fans, keyboard, mouse, etc.) remain active. Pressing the shift key more than 5 times will activate stick key and my mouse led remains on. Pressing any key will not wake my computer from this state unfortunately. I need to do a hard reset every single time this happens. Anyone have any idea what is causing this?

My event log shows this around the time when this happens. Not sure if it is related.
Event 1014, DNS Client Events
Name resolution for the name isatap.hsd1.ca.comcast.net timed out after none of the configured DNS servers responded.

This started ever since I did my yearly routine of reformatting my computer. The only thing that is different is that I updated my graphics card driver to the latest version. I am using ATI HD5850.


My System SpecsSystem Spec
.
10 Jun 2013   #2
gregrocker

 

Did you try the driver delivered by Windows Updates after enabling Automatically deliver drivers via Windows Update (Step 3). This is how Win7 delivers drivers it wants.

Since the Display driver is most important for the sleep and hibernate functions, you may have to roll back to the one which works if you can't find another solution.

First try the fixes for Sleep Mode Problems - Vista Forums

You shouldn't have to reinstall Win7 every year, since once you get a perfect Clean Reinstall
you can save a backup image to use in place of reinstall. But make sure you are sticking closely to the steps in the blue link since your problem seems to be driver-related and many try to apply old XPired rules for drivers to the first driver-complete OS and find themselves in trouble.
My System SpecsSystem Spec
10 Jun 2013   #3
red123

 
 

It's a little habit of mine started way before the age of SSD. Anyway, I updated my power settings to the recommended. Let's see if this works. Thanks
My System SpecsSystem Spec
.

11 Jun 2013   #4
red123

 
 

I updated everything from Windows Update and rollback my drivers, but started getting crashes whenever I sleep now. This is my minidump. Please advise. Thanks.


Attached Files
File Type: zip 061113-13260-01.zip (25.0 KB, 1 views)
My System SpecsSystem Spec
11 Jun 2013   #5
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Hi,
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {10, 2, 0, fffff880021bbc83}

*** WARNING: Unable to verify timestamp for nlndis.sys
*** ERROR: Module load completed but symbols could not be loaded for nlndis.sys
Probably caused by : nlndis.sys ( nlndis+19c8 )

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000010, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880021bbc83, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003113100
GetUlongFromAddress: unable to read from fffff800031131c0
 0000000000000010 Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
ndis!NdisReturnPackets+73
fffff880`021bbc83 488b7910        mov     rdi,qword ptr [rcx+10h]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  fffff88005280880 -- (.trap 0xfffff88005280880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000098 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880021bbc83 rsp=fffff88005280a10 rbp=0000000000000001
 r8=fffffa800a795cb0  r9=fffffa8006b592d0 r10=fffffa800a795020
r11=fffffa800a795e30 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
ndis!NdisReturnPackets+0x73:
fffff880`021bbc83 488b7910        mov     rdi,qword ptr [rcx+10h] ds:00000000`00000010=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002edb1a9 to fffff80002edbc00

STACK_TEXT:  
fffff880`05280738 fffff800`02edb1a9 : 00000000`0000000a 00000000`00000010 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`05280740 fffff800`02ed9e20 : fffffa80`0c781110 fffff880`05af1e66 fffff801`00000001 fffffa80`06b793d0 : nt!KiBugCheckDispatch+0x69
fffff880`05280880 fffff880`021bbc83 : fffffa80`0a795000 fffff880`021085c4 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`05280a10 fffff880`072719c8 : fffffa80`0a1b81a0 00000000`00000000 00000000`00000000 00000000`00000001 : ndis!NdisReturnPackets+0x73
fffff880`05280a60 fffffa80`0a1b81a0 : 00000000`00000000 00000000`00000000 00000000`00000001 fffffa80`0a795e30 : nlndis+0x19c8
fffff880`05280a68 00000000`00000000 : 00000000`00000000 00000000`00000001 fffffa80`0a795e30 fffff880`021bb9e0 : 0xfffffa80`0a1b81a0


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nlndis+19c8
fffff880`072719c8 ??              ???

SYMBOL_STACK_INDEX:  4

SYMBOL_NAME:  nlndis+19c8

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nlndis

IMAGE_NAME:  nlndis.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4d585625

FAILURE_BUCKET_ID:  X64_0xD1_nlndis+19c8

BUCKET_ID:  X64_0xD1_nlndis+19c8

Followup: MachineOwner
---------

5: kd> lmvm nlndis
start             end                 module name
fffff880`07270000 fffff880`077d2000   nlndis   T (no symbols)           
    Loaded symbol image file: nlndis.sys
    Image path: \SystemRoot\system32\DRIVERS\nlndis.sys
    Image name: nlndis.sys
    Timestamp:        Mon Feb 14 04:07:33 2011 (4D585625)
    CheckSum:         000126CB
    ImageSize:        00562000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your BSOD was caused by this driver: nlndis.sys Driver Description: NetLimiter driver

You should update to the latest version available from this link: Driver Reference Table - nlndis.sys

Kaspersky also seems to be contributing to these crashes:
Driver Reference Table - klim6.sys
Code:
fffff880`05280818  fffff880`05450c7fUnable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
 klim6+0x2c7f
Driver Reference Table - klflt.sys
Code:
fffff880`05280708  fffff880`04f2dd63Unable to load image \SystemRoot\system32\DRIVERS\klflt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
 klflt+0x2d63
Driver Reference Table - kneps.sys
Code:
fffff880`052806a8  fffff880`05af74e2Unable to load image \SystemRoot\system32\DRIVERS\kneps.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
 kneps+0xd4e2
I would recommend that you remove Kaspersky and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free

information   Information
  • Do not start the free trial of MalwareBytes, unselect that option when prompted.


  • Update and make full scans with both separately.

Update this driver also: Driver Description: Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys
Tip   Tip
How to clean left over drivers
Sometimes drivers remain, not completely uninstalled. Follow this tutorial for complete removal of drivers of the particular program: How to Clean Left Over Driver Files with Driver Sweeper
  • Click on the Start
  • Control Panel
  • Programs
  • Uninstall a program
  • Uninstall everything related to the software
Delete remnants of its drivers/older drivers using Driver Sweeper

Good luck
My System SpecsSystem Spec
11 Jun 2013   #6
red123

 
 

Wow! Good catch! I have been using a very out of date NetLimiter so most likely getting the driver update for my network card from Microsoft caused the instability. It was totally random as I have been using the same NetLimiter version for years. I'll leave Kaspersky installed for now and continue to monitoring anymore crashes. Thanks
My System SpecsSystem Spec
11 Jun 2013   #7
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Alright
My System SpecsSystem Spec
Reply

 computer would not go to sleep fully




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Computer not fully shutting down after SP1 update
Hey all. I'm hoping you can help me with my issue. Any time I go to the windows start menu to shut off the PC, windows will shut off but leave the fans and LEDs (probably the hardware as well) on and running. I can of course just flick the power switch and it will shut off, and I can also turn the...
General Discussion
Computer does not fully shut down or go to sleep
My laptop occasionally does not completely shut down/sleep/hibernate. It goes through all the steps up to where the screen turns off, but I can tell the computer doesn't turn off because the power button stays lit up as well as the lighted keyboard. Laptop originally had Vista 64bit installed...
General Discussion
Windows 7 Computer not fully entering sleep
Hello all, I have been having an issue with my computer sleeping and hibernating lately. When I force the computer into sleep or hibernate (sleep and hibernate are not set to occur after a given time) the screen shuts off but that's it. The fans and lights stay on and i think the HDD is still...
Performance & Maintenance
Windows 7 will not fully shut down, problems with sleep mode.
Hello all, I recently purchased a new computer, an Alienware, and have had some issues with shutting down and sleep mode. When I try to shut the computer down, it frequently stalls on the "shutting down" screen, and no matter how long I leave it, it will stay there, so I have to manually turn...
BSOD Help and Support
1970fp dvi Monitor won't fully sleep
Since I bought a new PC, the video card has a DVI connector so I thought why not use the cable that came with this monitor and connector it to via DVI. Everything is good with the driver, no yellow explanation mark or any other errors. The monitor is correctly identified and there are no new...
Hardware & Devices
Laptop does not fully enter sleep mode
Hi all, I've been experiencing this issue with Win 7 for a while now, I recently formatted and reinstalled a clean copy of Windows 7. I also made sure all of my drivers worked with my current laptop model, and made sure they were the most recent ones I could get. Finally I've got good protection...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App