Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Boot from a Pen Drive, freezing on Windows Setup

07 Jul 2013   #11
jumanji

Windows 7 Home Premium 32 bit
 
 

Sorry greg for interrupting.

Having seen, rather read , all that has happened in this thread, I would think that the OP should first run the manufacturer's diagnostic/repair utility on the HDD and clear it. Even a new HDD may be DOA. ( I have just successfully formatted a WD HDD running PW from a bootable pen drive, but repeated attempts to install Windows from a bootable pen drive - by whichever program I created the bootable pen drive - failed. Running a Quick Test brought the error, read element failed . Now the user is running the extended test. I presume wiping the HDD clean also is no guarantee that the HDD is OK)


My System SpecsSystem Spec
.
Reply

 Boot from a Pen Drive, freezing on Windows Setup




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SATA drive detected as an atapi drive by windows xp setup.
SATA drive detected as an atapi drive by windows xp setup. I’m wanting to install windows xp for backwards compatible with order programs. 1st primary partition is W7 size is 243.71 GB NTFS maximum it will shrink down. 2nd primary partition is setup as 99.97 GB FAT32 (can expanded space...
Installation & Setup
How to boot the setup of Windows 7 from another drive/partition?
I want to reinstall Windows 7 Home Prem x64 on my C drive by wiping it out and formatting/deleting the partition. My D drive has files on it and I do not want to touch it. Can I somehow make the setup run from the D drive? Install Windows 7 Directly From Hard Drive I have ISO, I have my...
Installation & Setup
My Dual Boot setup has the boot mgr on the wrong drive
I have managed to get myself into a situation where the "System Reserved" partition is on a different physical drive from my current C drive. This is, I presume, as a result of creating a dual boot system without fully understanding the consequences. I need to correct this because I intend to...
Installation & Setup
Swapping System Drive Letters in Dual Boot Setup
I set up an XP/Win7 dual boot system using 2 partitions on a single hard disk (XP was pre-installed). All seemed to go smoothly, except for the fact that I couldn't boot from the Win7 DVD for some reason. The process would start loading files from the DVD but would keep stalling just after the...
Installation & Setup
Old Storage Drive prevents BOOT in new setup
Recently purchased new mob/cpu/ddr3 to upgrade my system. Found out that you can't just swap RAID drives into new motherboard, okay drag/delay. So I setup the new RAID0 drivers from my mobo and reinstalled W7 pro x64. After the successful install I turned of puter and plugged in my storage...
Installation & Setup
No boot after unplugging setup drive
Hey all. Sorry if this question has really obvious solution but I've been bashing my head against this for a few hours this afternoon and am getting nowhere. I have downloaded the Win7 RC1 ISO and "burnt" it onto a 16GB OCZ Throttle eSATA / USB drive (exactly as in the SevenForums tutorial). I...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App