Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: can't restart Windows 7, it just resumes & stops on a locked program

24 Jul 2013   #1
dustman

windows 7 Ultimate, 64 bit
 
 
can't restart Windows 7, it just resumes & stops on a locked program

Hello, all,

I am stumped. I am running Windows 7. I have had very little trouble with it until now. I have Spybot installed on it, and it worked perfectly. Today I ran it and it found 6 threats. I clicked to fix the problems and it said all but 2 could be fixed, and those 2 could be fixed by restarting the computer. It asked if Spybot could check and run at restart. I checked ok. I restarted the computer,and after logging on, nothing appeared but a small Spybot window. It started the scan check, but locked up. I tried to restart and the only thing offered now is "resume Windows', log in, and then the Spybot window is blank. Every time I restart the computer, same thing, blank Spybot window. My desktop doesn't come on, or the start button. I have tried hitting F8 repeatedly on restart, but it doesn't do anything. Any help would be greatly appreciated.

Thank you,

Dustman


My System SpecsSystem Spec
.
24 Jul 2013   #2
cottonball

Windows 7 Home Premium
 
 

dustman,

Try the following, and let's see if this program can do the work for you...

Please plug USB flash drive into a clean computer.
Go to Start > Computer
Double-click Computer, and select the flash drive.
Right-click and select: Format
Press Start on the Format prompt.
Remove when done.

You may want to print these instructions so you can have access to follow
Also, you may want to read them once before you apply them.

Go to the Farbar Recovery Scan Tool Download
Select the 32-bit download.
Save the program to the >> USB flash drive.

Next, plug the flash drive into the problem computer.



Start the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until the Advanced Boot Options menu appears.
  • Use the arrow keys to select the Repair your computer menu item.
  • Select your language settings, and click: Next
  • Select your User account and click: OK (If you did not set a password, leave blank.)
On the System Recovery Options menu you get the following options:
  • Startup Repair
  • System Restore
  • Windows Complete PC Restore
  • Windows Memory Diagnostic Tool
  • Scan your computer's memory for errors
  • Command Prompt
Select Command Prompt
  • In the Command window, at the blinking cursor type notepad and press: Enter
  • In Notepad, under the File menu select: Open
  • Double-click Computer, find the flash drive letter, remember what letter it is, click on it, and press: Open
  • Close out of Notepad.
  • Click the Command window
  • Type g:\frst.exe, and press: Enter
    Note: Replace the drive letter g with the drive letter of your flash drive!
  • The tool starts and prepares to run. Follow the prompts.
  • Click Yes to the disclaimer.
  • Press: Scan
When done, the program saves the FRST.txt report, on the flash drive.

Close Notepad, then, click the Command Prompt window, and type exit, and press: Enter

Back at the System Recovery Options, press: ShutDown.

Remove the USB flash drive from the infected computer, and plug it into the good computer.

Please provide the FRST.txt report, located on the USB flash drive, in your reply.
My System SpecsSystem Spec
24 Jul 2013   #3
dustman

windows 7 Ultimate, 64 bit
 
 

Hello, Cottonball,

I was finally able to get the safe mode screen and fixed the problem.

Thanks for the kind response. I will print and keep it for future reference!

Thanks again,

Dustman
My System SpecsSystem Spec
.

Reply

 can't restart Windows 7, it just resumes & stops on a locked program




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Pc stops bit by bit until it needs a restart
First the internet goes, websites and programs, I can still ping the router though. A few seconds later, the programs I have open stop responding. A few seconds later the mouse stops moving. I wait 2 minutes and everything is still frozen solid, tried alt+f4 , ctrl+shift+esc ,...
General Discussion
windows update stops, and PC cant restart
I was installing an update when right in the middle it stops. If I try to restart windows it fails on the windows loading screen, forcing me to restore windows which I hate to do because it messes up my Flight Simulator program. Please advice needed. I didn't get any error message it just...
Windows Updates & Activation
windows 7 - program manager stops responding ( at the start )
Everytime i start my computer and after putting my password, at the desktop, a box appears saying that program manager stops responding and it is needed to restart the pc. it does it ( by himself ) and it is a cicle that dont stop, only if i manually close. apreciated all the help.
BSOD Help and Support
windows 7 stops at desktop no bsod no error code no restart
hi all i have just installed windows 7 onto this computer and every time i start up and get to desktop everything stops working, no mouse movement, no keyboard input, screen not refreshing or moving. i have run diagnostics on all the hardware nothing wrong there. however it works fine no...
General Discussion
ISO files locked, viewable by program but NOT BY WINDOWS
Hi all: I need your great expertise for a strange occurence. I have 3 ISO files of 4GB each, that the program DVD Shrink can see when opening them. It can even play them. They are supposedly located right under C:. But they have locks on each of them. Perhaps for this reason, Windows cannot see...
General Discussion
My ATI radeon 200 stops working when I restart
:mad: Im running windows 7 (obviously) 64 bit. and my ATI driver was working fine, and the aero themes were working until one day when I restarted, and my aero themes stopped working! when I right clicked on my desktop and click >Personalize. and click the troubleshoot link at the bottom, that...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App