Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Reboot and select proper Boot Device?? Help!

30 Jul 2013   #21
stuckstuck

Microsoft Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by gregrocker View Post
What do you mean exactly when you say the DVD didn't work? I gave you a link to download a new installer and tool to burn to DVD or write to bootable flash stick if you need it to get the disk to boot or work correctly.

Did you mark C Active, unplug all other HD's, swap the disk cable to WIn7, then boot into the DVD to run Startup Repair - Run up to 3 Separate Times ? This is how this is repaired.

I gave you very specfic steps in my first post that are known to work. If you can't perform them then we need to know at exactly what step do they fail? Saying "it didn't work" doesn't help.
That's exactly what I mean, the startup repair didn't detect anything wrong, that's it.
No over-thinking involved.
Nothing went wrong in the process of following your instructions.
The results from the startup repair was simply nothing, 'perfect'. (Which obviously it isn't)

Ohh, and a little update.
I've been trying to get this fixed and in the process have changed things slightly.
Not sure if I did any good to solving this problem.

But...

- I have converted both my HDs to 'Dynamic' which I wish I could change back.
Reboot and select proper Boot Device?? Help!-bs.png

-Minitool seems to be telling me that my hard drives aren't in good health.
although windows computer management & HD Tune Pro is telling my otherwise.
So I'm getting mixed signals.
Reboot and select proper Boot Device?? Help!-mt.png
Reboot and select proper Boot Device?? Help!-hd.png

-I'm making this worse & digging a hole deeper for myself.




My System SpecsSystem Spec
.
30 Jul 2013   #22
gregrocker

 

Why couldn't you work with me through the proven steps I gave you to avoid the catastrophe you've created?

When it says run Startup Repair - Run up to 3 Separate Times - provided in a tutorial that explains why this is necessary - it means run Startup Repair 3 Separate times with reboots between each not once and then give up. These repairs are to be run regardless of what is reported in the results. The repair utility must be given the chance to see that it needs to write boot files. In the rare case it won't write them I would have helped you unhide them on System Reserved and copy to C to complete the repairs.

Instead you report back cryptic "doesn't work" and then without further explanation destroy your Win7 without working with us here where we've successfully dealt with tens of thousands of these.

The problem is now that you converted your HD to Dynamic which is only meant to be used to span a partition across multiple HD's. Apparently you didn't see the warning message.

The solution to solve this non-destructively is to boot free Partition Wizard CD version 4.2 which is the last one which offers this as a free feature: pw422.zip ISO - Windows Live. You can also install Easeus Partition which offers this feature free but it's best to have the disk for rescue purposes since Win7 may not boot until reconverted and any needed repairs.

Download the ISO, rightclick to burn it to CD using Windows Image Burner, or use ImgBurn.

Boot CD. You will need to delete the extra partition(s) you created which tipped it to convert to Dynamic before it will convert back to Basic.

Then follow these video steps: How to convert dynamic disk to basic disk with Partition Wizard?

If Win7 will not start and you confirm it's been converted successfully, then confirm that the 100mb System Reserved partition (preferred if you have it) or C is Set Active partition - Partition Wizard Video Help, then run Startup Repair - Run up to 3 Separate Times.

After conversion if you want help adding a partition post back a screenshot of your maximized Disk Mgmt drive map with listings, using the Snipping Tool in Start Menu, attached using paper clip in Reply Box.
My System SpecsSystem Spec
30 Jul 2013   #23
stuckstuck

Microsoft Windows 7 Professional 64-bit
 
 

I've set my HDs back to basic.

I have a question.
My main HD now says that it has (System,Boot,Page File,Active,Crash Dump, Primary Partition)
Am I missing something?
If my main HD has everything it needs in that same partition, then is there even a need for a 'System Reserved' partition?
I've just disconnected my slave HD and booted from my main HD alone successfully.
Reboot and select proper Boot Device?? Help!-bs.png

Your input would be helpful cause I'm just confused.

**EDIT**

Did I just accidentally fix my problem? xD


My System SpecsSystem Spec
.

30 Jul 2013   #24
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Are you reading? System reserved is what does the booting of w7.
My System SpecsSystem Spec
30 Jul 2013   #25
gregrocker

 

System Active flags mean Win7 is booting from its own C partition. The System Reserved mirroring nonsense you did only wasted time and nearly ruined your Win7. It was brought back from the grave.

You can delete System Reserved and extend C into the space now. It is not booting Win7 or even slightly involved. If it were it would have the System label which proves that it is booting the OS.

The operation was about writing the System Boot files to C to cut out the SysReserved boot partition on the other HD, using the most comprehensive method (Startup Repair x3) which tests repeatedly all parameters before applying repairs.
My System SpecsSystem Spec
30 Jul 2013   #26
stuckstuck

Microsoft Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Are you reading? System reserved is what does the booting of w7.
Yes, but if I remember correctly, the 'System Reserved' Partition will contain the (System) Files in order for the OS to boot right?
But the partition my OS and everything else is installed in actually includes the (System) files.

Are you looking?

The pictures with the red arrows were examples from the internet to demonstrate my point.
The pictures with the black circles is mine.

Reboot and select proper Boot Device?? Help!-bootfiles.jpg
Reboot and select proper Boot Device?? Help!-bootfiless.png



(From the internet)>>>Reboot and select proper Boot Device?? Help!-sys.jpeg

(Mine)>>>Reboot and select proper Boot Device?? Help!-bs.png

The C: seems to have it's own boot files.
The same exact files found in the 'System Reserved' partition.
I'm just saying.


My System SpecsSystem Spec
30 Jul 2013   #27
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

yes, I've been looking for many posts, have a good one.
My System SpecsSystem Spec
30 Jul 2013   #28
stuckstuck

Microsoft Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
yes, I've been looking for many posts, have a good one.
Wait, just to make sure, my problem's solved?
My System SpecsSystem Spec
30 Jul 2013   #29
gregrocker

 

Yes.
My System SpecsSystem Spec
Reply

 Reboot and select proper Boot Device?? Help!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Reboot & Select proper Boot device
Hi I am new and created my account for this but will be sticking around. So recently I was playing a game but then feel asleep while playing, when I woke up and turned on my pc this came up. I have been reading and watching videos for about 5 hours and going through BIOS trying to fix it but...
General Discussion
Reboot and select proper boot device
Hi guys, I have searched the forum and tried some of the solutions but it does not solve my problem. I had disconnected my had and reconnected it but to no avail. I can't even enter the bios setup screen, I can only enter the asrock setup utility screen. Does this mean my hdd is spoilt? Thanks for...
Hardware & Devices
reboot and select proper boot device.
Hi, i wasn't sure what section to put this problem in so decided on general. I have a asus x53e notebook that was on balanced on two corners to press in the charging cable ( not the problem ). It was knocked over and now when starting up i get the message on a black screen Reboot and select proper...
General Discussion
reboot and select proper boot device or insert boot media in select bo
Ok, I have googled this error and see this is common. Hopefully, I have missed something simple. I replaced my hard drive and installed the complete version of Windows 7 Home Premium. All worked great, till the next day when I turned the PC back on. I get the error message: reboot and select...
General Discussion
How do I fix the reboot and select proper boot device.
OwHi everybody i dont know is i should to post this issues here but i need help w/ booting my system build i connected my optical drive and my hdd and when power up everything look OK until goes to the monitor I see this black screen with that message I trying several things but not success how...
General Discussion
Reboot or select proper boot device
I have found plenty of threads with the same problem claiming to be solved but none have manage to fix my problem im afraid, plus i am not technical enough to follow a lot of the instructions so dare not try them. So here is my problem, i was on the internet and it seemed windows crashed everything...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App