Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recovery was deleted now leading nowhere

01 Sep 2013   #11
kowshik

Windows 7 64Bit
 
 

This is the one I get during using the recovery disc




Attached Thumbnails
Recovery was deleted now leading nowhere-wp_20130901_005.jpg  
My System SpecsSystem Spec
.
01 Sep 2013   #12
kowshik

Windows 7 64Bit
 
 

This is the error I get when I use the recovery


Attached Thumbnails
Recovery was deleted now leading nowhere-wp_20130901_005.jpg  
My System SpecsSystem Spec
01 Sep 2013   #13
mitchell65

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The OS disc but if you prefer follow Pauly advice. This will give you the best install of Windows 7 but you specifically asked for an install back to the factory condition. I still don't see how Windows 8 got into the equasion though???
My System SpecsSystem Spec
.

01 Sep 2013   #14
kowshik

Windows 7 64Bit
 
 

So I cannot use my recovery discs anymore
My System SpecsSystem Spec
02 Sep 2013   #15
kowshik

Windows 7 64Bit
 
 

Hi pals thanks for your help what I did was took the laptop to nearby HP service centre and they installed a firmware which updated my bios and MB settings now the recovery is working
My System SpecsSystem Spec
02 Sep 2013   #16
Pauly

Win7 Ultimate X64
 
 

Good news, glad to hear you got it working
My System SpecsSystem Spec
02 Sep 2013   #17
kowshik

Windows 7 64Bit
 
 

And now the recovery runs fine but at the end it says restoration incomplete and comes with a log....
My System SpecsSystem Spec
02 Sep 2013   #18
mitchell65

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Can you copy and paste the log into here? If not Why not do a clean install?
My System SpecsSystem Spec
02 Sep 2013   #19
kowshik

Windows 7 64Bit
 
 

--------------------------------------------------
[21:58:35.59] Entering Checking OS Edition...
----------------------------------------
[21:58:35.59] Check RStone.ini file to determine the requried edition.
[21:58:35.60] Exiting Checking OS Edition...
--------------------------------------------------

--------------------------------------------------
[21:58:35.62] Check if Upgrading Win 7 is required.
----------------------------------------
[21:58:35.62] Current Edition is [HomeBasic]...
[21:58:35.62] Required [Starter]. Don't need to upgrade...
[21:58:35.62] Required [Starter] ...
[21:58:38.80] Required [Starter] Edition. But, OS is not [Starter]...
[21:58:38.80] Upgrading OS edition might have some problem...

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514

Current edition is:

Current Edition : HomeBasic
The operation completed successfully.


[21:59:03.26] ------------------------------------------------------------------------------------------
...
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[21:59:03.26] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
...
[21:59:03.26] ------------------------------------------------------------------------------------------



[21:58:02.86] Start BBOffline.cmd...
UPDrv=[C:]
[21:58:02.86] Set UIA Error Code to 951
[21:58:03.03] WinPE is 32bit.
[21:58:03.03] Starts [FixUps].
[21:58:03.03] ---------------------------------------------------------------------
[21:58:03.03] FixUps.cmd...
[21:58:03.03] create overall progress info...
[21:58:03.50] FixUps.cmd completed...
[21:58:03.50] ---------------------------------------------------------------------
[21:58:03.50] Starts [Tweaks for SSRD].
[21:58:03.52] ---------------------------------------------------------------------
[21:58:03.52] SSRD Tweaks to change user default locale...
[21:58:03.52] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[21:58:03.59] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[21:58:08.60] ---------------------------------------------------------------------
[21:58:08.60] Launch PININST.exe for Offline ...
[21:58:14.86] Starts [Sleep 10 sec].
[21:58:24.89] Starts [Create RStoneFUpdate.INI].
[21:58:30.77] Starts [create 1GB Pagefile for offline].

Volume in drive C has no label.
Volume Serial Number is 6E78-420B

Directory of C:\system.sav\bbv

09/02/2011 09:58 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 29,922,541,568 bytes free
[21:58:30.82] Brand detection.


[21:58:31.31] ---------------------------------------------------------------------
[21:58:52.51] Start SysID Check...
[21:58:52.78] Start Option Code Checks...
SKU_DEF_COUNTRY=[244]
SKU_DEF_SYS_LOC=[en-US]
------------------------------
Reset country in administrator...
------------------------------
------------------------------
Reset country in Default user...
------------------------------
------------------------------
Reset System localed
------------------------------

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514

Reporting offline international settings.

Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)

Installed language(s): en-US
Type : Fully localized language.

The operation completed successfully.
------------------------------
Updated System Locale info..
------------------------------
[21:59:00.31] Start PIN Tweaks...
[21:59:00.33] ---------------------------------------------------------------------
[21:59:00.33] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[21:59:00.33] ----------------------------------------
[21:59:00.33] Tweaks for OOBE's Unattend.xml
[21:59:00.33] to pick up the proper file...
[21:59:00.33] ----------------------------------------
[21:59:00.33] rename unattend.org to unattend.or_
[21:59:00.36] ----------------------------------------
[21:59:00.36] without Light Sensor..
[21:59:00.36] ----------------------------------------
[21:59:00.36] This is Restored image [RImage.flg]...
[21:59:00.36] ---------------------------------------------------------------------
[21:59:00.38] Start MIR Tweaks...
[21:59:00.38] ---------------------------------------------------------------------
[21:59:00.38] [MIR Tweaks] ...
[21:59:00.39] ---------------------------------------------------------------------
[21:59:00.39] Start Factory Update(s)...
[21:59:00.58] Start QFE Offline installation...
[21:59:03.19] PININST_OFF: PASSED...

[21:59:03.22] Type C:\System.sav\Logs\BBFindEr.log...

[21:59:03.22] Type C:\System.sav\Logs\BBFindE0.log...

---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED

[21:59:03.22] Type C:\System.sav\Logs\BBFindEr.log...

[21:59:03.22] Type C:\System.sav\Logs\BBFindE0.log...

---------- C:\SYSTEM.SAV\LOGS\BBFIND4QFE.LOG
[21:59:03.22] Check FUList.log if there is duplicate Desc...
No duplication.
[21:59:03.26] No Duplicated Desc is found... PASSED.
[21:59:03.26] There was no Factory Update...
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:03:15.11] ------------------------------------------------------------------------------------------
[22:03:15.11] ------------------------------------------------------------------------------------------
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:04:56.81] ------------------------------------------------------------------------------------------
[22:04:56.81] ------------------------------------------------------------------------------------------
There might be unexpected reboot during Factory Update.
The process will cause CTO panic because the image might not be normal...
[22:26:09.36] ------------------------------------------------------------------------------------------
[22:26:09.36] ------------------------------------------------------------------------------------------
My System SpecsSystem Spec
02 Sep 2013   #20
mitchell65

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I have an idea on this but you need to wait till someone more experienced than me has a look at this!
My System SpecsSystem Spec
Reply

 Recovery was deleted now leading nowhere




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Recover Deleted Windows 7 Recovery Files from Recovery Drive
Dear All, My colleague mistakenly deleted all the file from the Windows 7 recovery drive, drive is still there and nothing have been copied in that drive after deleting the recovery files. Machine is HP Probook 4530s. Is there any way to restore the windows 7 recovery reset the system to its...
General Discussion
Deleted Partition Recovery Help !!!
Hello guy I'm new here and have come to this spot after searching. What happened was I got a terrible virus that locked my computer so my only option at the time was to install a fresh copy and upgrade I went from win 7 home x64 to ultra x64. As I installed the fresh copy I chose to delete the old...
Backup and Restore
OEM recovery partition has been deleted
I was given a Toshiba Satellite C665D. I tried running the recovery media creator but got a message that said No HDD recovery area. The Toshiba recovery media creator can not be launched. I contacted the previous owner and was told no recovery media was done for the notebook and he created a new...
Installation & Setup
deleted the recovery partition on my Laptop.
I accidentally deleted the recovery partition on my Hp compaq Presario CQ61 and have never burnt the recovery to a DVD. Checked Hp Site and the only option is to re-order another. The serial number of my Notebook is CNF9494GMB & Model is CQ-61420US Any help in this regard will be appreciated
Backup and Restore
Deleted Vista Recovery Data
I originally had Vista on my computer when purchased. The computer had C:, D:,. The HP recovery was on D: with everything else on C: I deleted the Data from the D: recovery disc as I had no more use for Vista and most of the programs that came from HP would not work with Windows 7. I have...
Installation & Setup
my win7 is courrpted and recovery has been deleted !!!!
my win7 is courrpted and recovery has been deleted . when i put th cd of windows it asks for dvd drivers and hard diosk drivers... it is totally stuk. how to install drivers ...????:o
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App